Bending Under Tension Test with Direct Friction Measurement

Jan Lasson Andreasen; David Dam Olsson; K. Chodnikiewicz; Niels Bay

Bending Under Tension Test with Direct Friction Measurement

Jan Lasson Andreasen, David Dam Olsson, K. Chodnikiewicz, Niels Bay

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Abstract

A special BUT-transducer has been developed in which friction around the tool radius can be directly measured when drawing a plane sheet strip around a cylindrical tool-pin under constant back tension. The front tension, back tension and torque on the tool-pin are all measured directly, thus enabling accurate measurement of friction and direct determination of lubricant film breakdown for varying normal pressure, sliding speed, tool radius and tool preheat temperature. The transducer is applied in an experimental investigation focusing on limits of lubrication in drawing of stainless steel showing the influence of varying process conditions and the performance of different lubricants.

Original language	English
Title of host publication	Proc. of the 2nd ICTMP
Editors	N. Bay
Place of Publication	Vedbæk
Publisher	IKON Tekst & Tryk A/S
Publication date	2004
Pages	577-588
Publication status	Published - 2004
Event	2nd International Conference on Tribology in Manufacturing Processes - Nyborg, Denmark Duration: 15 Jun 2004 → 18 Jun 2004 Conference number: 2

Conference

Conference	2nd International Conference on Tribology in Manufacturing Processes
Number	2
Country	Denmark
City	Nyborg
Period	15/06/2004 → 18/06/2004

Access to Document

http://www.ipl.dtu.dk/publikation/8254/dk/

Fingerprint Dive into the research topics of 'Bending Under Tension Test with Direct Friction Measurement'. Together they form a unique fingerprint.

Cite this

@inproceedings{461cdf7e7fd243a88264ac3534a97b42,

title = "Bending Under Tension Test with Direct Friction Measurement",

abstract = "A special BUT-transducer has been developed in which friction around the tool radius can be directly measured when drawing a plane sheet strip around a cylindrical tool-pin under constant back tension. The front tension, back tension and torque on the tool-pin are all measured directly, thus enabling accurate measurement of friction and direct determination of lubricant film breakdown for varying normal pressure, sliding speed, tool radius and tool preheat temperature. The transducer is applied in an experimental investigation focusing on limits of lubrication in drawing of stainless steel showing the influence of varying process conditions and the performance of different lubricants.",

author = "Andreasen, {Jan Lasson} and Olsson, {David Dam} and K. Chodnikiewicz and Niels Bay",

year = "2004",

language = "English",

pages = "577--588",

editor = "{N. Bay}",

booktitle = "Proc. of the 2nd ICTMP",

publisher = "IKON Tekst & Tryk A/S",

note = "2nd International Conference on Tribology in Manufacturing Processes, ICTMP2004 ; Conference date: 15-06-2004 Through 18-06-2004",

}

TY - GEN

T1 - Bending Under Tension Test with Direct Friction Measurement

AU - Andreasen, Jan Lasson

AU - Olsson, David Dam

AU - Chodnikiewicz, K.

AU - Bay, Niels

N1 - Conference code: 2

PY - 2004

Y1 - 2004

N2 - A special BUT-transducer has been developed in which friction around the tool radius can be directly measured when drawing a plane sheet strip around a cylindrical tool-pin under constant back tension. The front tension, back tension and torque on the tool-pin are all measured directly, thus enabling accurate measurement of friction and direct determination of lubricant film breakdown for varying normal pressure, sliding speed, tool radius and tool preheat temperature. The transducer is applied in an experimental investigation focusing on limits of lubrication in drawing of stainless steel showing the influence of varying process conditions and the performance of different lubricants.

AB - A special BUT-transducer has been developed in which friction around the tool radius can be directly measured when drawing a plane sheet strip around a cylindrical tool-pin under constant back tension. The front tension, back tension and torque on the tool-pin are all measured directly, thus enabling accurate measurement of friction and direct determination of lubricant film breakdown for varying normal pressure, sliding speed, tool radius and tool preheat temperature. The transducer is applied in an experimental investigation focusing on limits of lubrication in drawing of stainless steel showing the influence of varying process conditions and the performance of different lubricants.

M3 - Article in proceedings

SP - 577

EP - 588

BT - Proc. of the 2nd ICTMP

A2 - null, N. Bay

PB - IKON Tekst & Tryk A/S

CY - Vedbæk

T2 - 2nd International Conference on Tribology in Manufacturing Processes

Y2 - 15 June 2004 through 18 June 2004

ER -