Abstract
In this paper a new control-interface card for developing simple control loops and generating test signals for power electronic converters is presented. The control board can operate with two computational cores (Texas Instruments and Microchip) allowing using the preferred DSP architecture and
development environment. Moreover, the interface board can operate with open hardware Arduino-like boards such as the ChipKit Uno32. The paper also describes how to enhance the performance of a ChipKit Uno32 with a dsPIC obtaining a more suitable solution for power electronics. The basic blocks and
interfaces of the boards are presented in detail as well as the board main specifications. The board operation has been tested with three core platforms: TI Piccolo controlSTICK, a Microchip dsPIC and a ChipKit Uno32 (Arduino-like platform). The board was used for generating test signals for characterizing 1200 V Si and SiC power semiconductors. A 6 kW dc-dc converter prototype is presented; the converter is based on the developed interface board.
development environment. Moreover, the interface board can operate with open hardware Arduino-like boards such as the ChipKit Uno32. The paper also describes how to enhance the performance of a ChipKit Uno32 with a dsPIC obtaining a more suitable solution for power electronics. The basic blocks and
interfaces of the boards are presented in detail as well as the board main specifications. The board operation has been tested with three core platforms: TI Piccolo controlSTICK, a Microchip dsPIC and a ChipKit Uno32 (Arduino-like platform). The board was used for generating test signals for characterizing 1200 V Si and SiC power semiconductors. A 6 kW dc-dc converter prototype is presented; the converter is based on the developed interface board.
Original language | English |
---|---|
Title of host publication | The 14th IEEE Workshop on Control and Modeling for Power Electronics |
Number of pages | 7 |
Publisher | IEEE |
Publication date | 2013 |
ISBN (Print) | 978-1-4673-4916-1 |
Publication status | Published - 2013 |
Event | IEEE COMPEL 2013: The 14th IEEE Workshop on Control and Modeling for Power Electronics - Fort Douglas Heritage Park, Salt Lake City, Utah, United States Duration: 23 Jun 2013 → 26 Jun 2013 http://www.ieee-compel.org/ |
Conference
Conference | IEEE COMPEL 2013 |
---|---|
Location | Fort Douglas Heritage Park |
Country | United States |
City | Salt Lake City, Utah |
Period | 23/06/2013 → 26/06/2013 |
Internet address |