An easy-to-use microfluidic interconnection system to create quick and reversibly interfaced simple microfluidic devices

Research output: Contribution to journalJournal article – Annual report year: 2015Researchpeer-review

View graph of relations

The presented microfluidic interconnection system provides an alternative for the individual interfacing of simple microfluidic devices fabricated in polymers such as polymethylmethacrylate, polycarbonate and cyclic olefin polymer. A modification of the device inlet enables the direct attachment of tubing (such as polytetrafluoroethylene tubing) secured and sealed by using a small plug, without the need for additional assembly, glue or o-rings. This provides a very clean connection that does not require additional, potentially incompatible, materials. The tightly sealed connection can withstand pressures above 250 psi and therefore supports applications with high flow rates or highly viscous fluids. The ease of incorporation, configuration, fabrication and use make this interconnection system ideal for the rapid prototyping of simple microfluidic devices or other integrated systems that require microfluidic interfaces. It provides a valuable addition to the toolbox of individual and small arrays of connectors suitable for micromachined or template-based injection molded devices since it does not require protruding, threaded or glued modifications on the inlet and avoids bulky and expensive fittings.
Original languageEnglish
Article number115010
JournalJournal of Micromechanics and Microengineering
Volume25
Issue number11
Number of pages10
ISSN0960-1317
DOIs
Publication statusPublished - 2015
CitationsWeb of Science® Times Cited: No match on DOI

Download statistics

No data available

ID: 118852362