Amorphous TM1−xBx alloy particles prepared by chemical reduction (invited)

Research output: Contribution to journalJournal articleResearchpeer-review

171 Downloads (Pure)

Abstract

Amorphous transition-metal boron (TM-B) alloy particles can be prepared by chemical reduction of TM ions by borohydride in aqueous solutions. ln the last few years systematic studies of the parameters which control the composition, and, in turn, many of the properties of the alloy particles, have been performed and are reviewed in the present paper. The most important preparation parameters which influence the composition are the concentration of the borohydride solution and the pH of the TM salt solution. By controlling these parameters it is possible to prepare amorphous alloy samples with boron contents from about 9 up to about 40 at. %. Journal of Applied Physics is copyrighted by The American Institute of Physics.
Original languageEnglish
JournalJournal of Applied Physics
Volume69
Issue number8
Pages (from-to)5256-5261
ISSN0021-8979
DOIs
Publication statusPublished - 1991

Bibliographical note

Copyright (1991) American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics.

Cite this

@article{120d4466da934fe6909a059bbaab365e,
title = "Amorphous TM1−xBx alloy particles prepared by chemical reduction (invited)",
abstract = "Amorphous transition-metal boron (TM-B) alloy particles can be prepared by chemical reduction of TM ions by borohydride in aqueous solutions. ln the last few years systematic studies of the parameters which control the composition, and, in turn, many of the properties of the alloy particles, have been performed and are reviewed in the present paper. The most important preparation parameters which influence the composition are the concentration of the borohydride solution and the pH of the TM salt solution. By controlling these parameters it is possible to prepare amorphous alloy samples with boron contents from about 9 up to about 40 at. {\%}. Journal of Applied Physics is copyrighted by The American Institute of Physics.",
author = "S{\o}ren Linderoth and Steen M{\o}rup",
note = "Copyright (1991) American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics.",
year = "1991",
doi = "10.1063/1.348070",
language = "English",
volume = "69",
pages = "5256--5261",
journal = "Journal of Applied Physics",
issn = "0021-8979",
publisher = "American Institute of Physics",
number = "8",

}

Amorphous TM1−xBx alloy particles prepared by chemical reduction (invited). / Linderoth, Søren; Mørup, Steen.

In: Journal of Applied Physics, Vol. 69, No. 8, 1991, p. 5256-5261.

Research output: Contribution to journalJournal articleResearchpeer-review

TY - JOUR

T1 - Amorphous TM1−xBx alloy particles prepared by chemical reduction (invited)

AU - Linderoth, Søren

AU - Mørup, Steen

N1 - Copyright (1991) American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics.

PY - 1991

Y1 - 1991

N2 - Amorphous transition-metal boron (TM-B) alloy particles can be prepared by chemical reduction of TM ions by borohydride in aqueous solutions. ln the last few years systematic studies of the parameters which control the composition, and, in turn, many of the properties of the alloy particles, have been performed and are reviewed in the present paper. The most important preparation parameters which influence the composition are the concentration of the borohydride solution and the pH of the TM salt solution. By controlling these parameters it is possible to prepare amorphous alloy samples with boron contents from about 9 up to about 40 at. %. Journal of Applied Physics is copyrighted by The American Institute of Physics.

AB - Amorphous transition-metal boron (TM-B) alloy particles can be prepared by chemical reduction of TM ions by borohydride in aqueous solutions. ln the last few years systematic studies of the parameters which control the composition, and, in turn, many of the properties of the alloy particles, have been performed and are reviewed in the present paper. The most important preparation parameters which influence the composition are the concentration of the borohydride solution and the pH of the TM salt solution. By controlling these parameters it is possible to prepare amorphous alloy samples with boron contents from about 9 up to about 40 at. %. Journal of Applied Physics is copyrighted by The American Institute of Physics.

U2 - 10.1063/1.348070

DO - 10.1063/1.348070

M3 - Journal article

VL - 69

SP - 5256

EP - 5261

JO - Journal of Applied Physics

JF - Journal of Applied Physics

SN - 0021-8979

IS - 8

ER -