Adiabatic Steam-Water Annular Flow in an Annular Geometry

P. S. Andersen, J. Würtz

    Research output: Contribution to journalJournal articleResearchpeer-review

    Abstract

    Experimental results for fully developed steam-water annular flow in annular geometries are presented. Rod and tube film flow rates and axial pressure gradients were measured for mass fluxes between 500 and 2000 kg/m2s, steam qualities between 20 and 60 per cent and pressures ranging from 3 to 9 MPa. It was found that the measured tube film flow rate per unit tube perimeter is always many times greater than the corresponding rod film flow rate. Possible explanations for this asymmetry are discussed.
    Original languageEnglish
    JournalInternational Journal of Multiphase Flow
    Volume7
    Issue number2
    Pages (from-to)235-239
    ISSN0301-9322
    DOIs
    Publication statusPublished - 1981

    Fingerprint

    Dive into the research topics of 'Adiabatic Steam-Water Annular Flow in an Annular Geometry'. Together they form a unique fingerprint.

    Cite this