TY - RPRT
T1 - Adiabatic continuous stirred tank reactor
AU - Schroll-Fleischer, Eskild
AU - Wu, Hao
AU - Huusom, Jakob Kjøbsted
AU - Jørgensen, John Bagterp
PY - 2017
Y1 - 2017
N2 - The present report documents the adiabatic CSTR experimental setup after it was refurbished in September 2017.
The goal of the refurbishment was firstly to enable computer control of the experiment using the Open Process Control Unified Architecture (OPC-UA) standard, and secondly to improve the experiment for use in course 28845 Chemical Reaction Engineering Laboratory. Initially the experimental setup is described in terms of programmable logic controller (PLC) hardware, laboratory apparatus and software. This is followed by a description of how to connect to the PLC via OPC-UA. The appendix contains an experimental guide for use in course 28845, step-by-step instructions on how to control the setup with a computer, sample code and datasheets.
AB - The present report documents the adiabatic CSTR experimental setup after it was refurbished in September 2017.
The goal of the refurbishment was firstly to enable computer control of the experiment using the Open Process Control Unified Architecture (OPC-UA) standard, and secondly to improve the experiment for use in course 28845 Chemical Reaction Engineering Laboratory. Initially the experimental setup is described in terms of programmable logic controller (PLC) hardware, laboratory apparatus and software. This is followed by a description of how to connect to the PLC via OPC-UA. The appendix contains an experimental guide for use in course 28845, step-by-step instructions on how to control the setup with a computer, sample code and datasheets.
M3 - Report
T3 - DTU Compute Technical Report-2017
BT - Adiabatic continuous stirred tank reactor
PB - DTU Compute
ER -