Achieving a More Sustainable Design for the Production of Di-Methyl Carbonate Via CO2 Utilization

Spardha Jhamb, Dane Hurley, Pawel Sobczyk , Amata Anantpinijwatna

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

45 Downloads (Pure)

Abstract

Carbon dioxide (CO2) emissions are a great concern for the environment resulting in many new technologies and policies in order to mitigate these emissions. This ongoing issue has gained significant attention in recent years and poses a challenge for the 21st century. CO2 utilization can be achieved in three ways; conversion into a fuel, a feedstock for producing important chemical compounds and lastly via non-conversion utilization such as for enhanced oil recovery and as a solvent [1].

One particularly important chemical which CO2 can be converted into is dimethyl carbonate (DMC). DMC is a good replacement for toxic methylating agents and phosgene. Additionally, it can also be used as an octane booster in fuel as it significantly increases the octane number due to the high oxygen content (53.3 wt%) in comparison to other alkylcarbonates [2]. DMC can be produced from CO2 by either reacting CO2 directly with methanol or by firstly reacting ethylene oxide with CO2 to produce ethylene carbonate as an intermediate followed by a subsequent reaction with methanol [4].

In this project, a process plant was designed using the two step reactions utilising CO2 to produce DMC as well as the by-product ethylene glycol and any unconverted ethylene carbonate. A hierarchical decomposition approach was used for designing the process, by decomposing the synthesis into 12 hierarchical tasks. According to the design, the process will produce on a yearly basis around 15,000 metric tonnes of DMC (10% of the Chinese market, excluding the largest producer).

This design of the process is unique as it does not use conventional separation procedures like pressure-swing, reactive distillation or extractive distillation to break azeotropes that are commonly encountered during the separation of products, hence, avoiding the use of toxic chemicals. Instead, the separation of DMC and methanol utilises a pressure distillation column as the azeotrope is pressure sensitive and can be broken at 20 bar. Additionally, the azeotrope between ethylene glycol and ethylene carbonate is not sensitive to pressure so the possibilities of membrane separation were explored. A membrane that could separate the two compounds based on polarity was chosen, which could result in pure ethylene carbonate and almost pure ethylene glycol. Further, this membrane separation also reduces the consumption of energy in comparison to the installation of distillation columns.

Heat integration and process optimisation were then performed in attempt to reduce energy consumption and unnecessary costing according to the economic evaluation of the process. In order to meet the design targets these limitations need to be eliminated. Finally, a LCA and sustainability analysis were performed in order to reduce other limitations in the process design [3], [5].

This poster will present the 12 step hierarchical approach to synthesise a more sustainable process design for utilising CO2 to produce DMC. The results from each task and the important considerations for each stage will be highlighted.
Original languageEnglish
Publication date2015
Number of pages4
Publication statusPublished - 2015
Event2015 AIChE Annual Meeting - Salt Palace Convention Center, Salt Lake City, United States
Duration: 8 Nov 201513 Nov 2015
http://www.aiche.org/conferences/aiche-annual-meeting/2015

Conference

Conference2015 AIChE Annual Meeting
LocationSalt Palace Convention Center
CountryUnited States
CitySalt Lake City
Period08/11/201513/11/2015
Internet address

Fingerprint

Dive into the research topics of 'Achieving a More Sustainable Design for the Production of Di-Methyl Carbonate Via CO2 Utilization'. Together they form a unique fingerprint.

Cite this