Accelerated fatigue testing of LM 19.1 blades

Ole Jesper Dahl Kristensen, E. Jørgensen

    Research output: Book/ReportReportResearchpeer-review

    737 Downloads (Pure)

    Abstract

    A series of 19.1 metre wind turbine blades manufactured by LM Glasfiber A/S of Lunderskov, Denmark were subjected to a series of flapwise fatigue tests. The object of these fatigue tests is to evaluate the impact of an increased load on the blade in afatigue test and to give information if it is possible to increase the load in fatigue test to shorten test time. The tests were carried out as a part of a project financed by the Danish Energy Agency. During the fatigue tests the blades have beensurveyed with thermal imaging equipment to determine how an increase in fatigue load affects the blade material. In addition to the thermal imaging surveillance the blades were instrumented with strain gauges. This report presents the temperature duringtest, calibration test results, moment range measurements, strain statistics, thermal imaging registrations and a determination of the size and cause of the damages. The report is also giving information on the blade-to-blade variation.
    Original languageEnglish
    Number of pages71
    Publication statusPublished - 2003
    SeriesDenmark. Forskningscenter Risoe. Risoe-R
    Number1358(EN)
    ISSN0106-2840

    Keywords

    • Risø-R-1358
    • Risø-R-1358(EN)

    Cite this

    Kristensen, O. J. D., & Jørgensen, E. (2003). Accelerated fatigue testing of LM 19.1 blades. Denmark. Forskningscenter Risoe. Risoe-R, No. 1358(EN)