A transparent Pyrex μ-reactor for combined in situ optical characterization and photocatalytic reactivity measurements.

Research output: Contribution to journalJournal article – Annual report year: 2013Researchpeer-review

View graph of relations

A new Pyrex-based μ-reactor for photocatalytic and optical characterization experiments is presented. The reactor chamber and gas channels are microfabricated in a thin poly-silicon coated Pyrex chip that is sealed with a Pyrex lid by anodic bonding. The device is transparent to light in the UV-vis-near infrared range of wavelengths (photon energies between ∼0.4 and ∼4.1 eV). The absorbance of a photocatalytic film obtained with a light transmission measurement during a photocatalytic reaction is presented as a proof of concept of a photocatalytic reactivity measurement combined with in situ optical characterization. Diffuse reflectance measurements of highly scattering photocatalytic nanopowders in a sealed Pyrex μ-reactor are also possible using an integrating sphere as shown in this work. These experiments prove that a photocatalyst can be characterized with optical techniques after a photocatalytic reaction without removing the material from the reactor. The catalyst deposited in the cylindrical reactor chamber can be illuminated from both top and bottom sides and an example of application of top and bottom illumination is presented.

Original languageEnglish
Article number103910
JournalReview of Scientific Instruments
Volume84
Issue number10
ISSN0034-6748
DOIs
Publication statusPublished - 2013

Bibliographical note

© 2013 AIP Publishing LLC

CitationsWeb of Science® Times Cited: No match on DOI

Download statistics

No data available

ID: 60088443