A micro-mechanical analysis of thermo-elastic properties and local residual stresses in ductile iron based on a new anisotropic model for the graphite nodules: Paper

Research output: Contribution to journalJournal article – Annual report year: 2016Researchpeer-review

Documents

DOI

View graph of relations

In this paper, the thermo-elastic behavior of the graphite nodules contained in ductile iron is derived on the basis of recent transmission electron microscopy investigations of their real internal structure. The proposed model is initially validated by performing a finite element homogenization analysis to verify its consistency with the room-temperature elastic properties of ductile iron measured at the macro scale. Subsequently, it is used to investigate the formation of local residual stresses around the graphite particles by simulating the manufacturing process of a typical ferritic ductile iron grade, and the results are compared with preliminary measurements using synchrotron x-rays. Finally, the obtained accurate description of the stress & strain field at the micro scale is used to shed light on common failure modes reported for the nodules and on some peculiar properties observed in ductile iron at both micro and macro scale.
Original languageEnglish
Article number055012
JournalModelling and Simulation in Materials Science and Engineering
Volume24
Issue number5
ISSN0965-0393
DOIs
Publication statusPublished - 2016
CitationsWeb of Science® Times Cited: No match on DOI

    Research areas

  • Micromechanics, Synchrotron x-ray diffraction, Ductile iron, Anisotropic elasticity, Residual stresses, Graphite nodules

Download statistics

No data available

ID: 125152432