Project Details
Description
The aim of this project was to work out five NORDTEST methods to support improved efficiency in metal cutting. The Institute of Manufacturing Engineering, DTU, was responsible for the development of the following:
1- a tapping torque test for cutting fluid evaluation;
2- a set of guidelines for the maintainance of cutting fluids.
1- a tapping torque test for cutting fluid evaluation;
2- a set of guidelines for the maintainance of cutting fluids.
| Status | Finished |
|---|---|
| Effective start/end date | 01/02/1996 → 30/09/1996 |
Collaborative partners
- Technical University of Denmark (lead)
- Technological Institute of Iceland (Project partner)
- VTT Technical Research Centre of Finland Ltd. (Project partner)
- Swedish Institute for Metal Research (Project partner)
Funding
- Unknown
Fingerprint
Explore the research topics touched on by this project. These labels are generated based on the underlying awards/grants. Together they form a unique fingerprint.