Publications per year
Publications per year
Project Details
Description
Ph.d.-project: Mogens Arentoft
The objective of the project is to establish the base for a design support system to prevent defects in forging by setting up a Defect Matrix and to provide the necessary information for a Decision Matrix.
The objective of the project is to establish the base for a design support system to prevent defects in forging by setting up a Defect Matrix and to provide the necessary information for a Decision Matrix.
| Status | Finished |
|---|---|
| Effective start/end date | 01/02/1993 → 31/12/1996 |
Fingerprint
Explore the research topics touched on by this project. These labels are generated based on the underlying awards/grants. Together they form a unique fingerprint.
Research output
- 1 Ph.D. thesis
-
Prevention of Defects in Forging by Numerical and Physical Simualtion
Arentoft, M., Feb 1997, Kgs. Lyngby, Denmark: Technical University of Denmark. 185 p. (MM; No. 96.74).Research output: Book/Report › Ph.D. thesis