Publications per year
Publications per year
Project Details
| Status | Active |
|---|---|
| Effective start/end date | 01/01/2022 → … |
UN Sustainable Development Goals
In 2015, UN member states agreed to 17 global Sustainable Development Goals (SDGs) to end poverty, protect the planet and ensure prosperity for all. This project contributes towards the following SDG(s):
Fingerprint
Explore the research topics touched on by this project. These labels are generated based on the underlying awards/grants. Together they form a unique fingerprint.
-
In-situ measurements of the load transferring shrinkage of thermosets used in composite materials for wind turbine blades
Mikkelsen, L. P., 2022, Composites Meet Sustainability – Proceedings of the 20th European Conference on Composite Materials: Materials. Vassilopoulos, A. P. & Michaud, V. (eds.). Lausanne, Switzerland: École Polytechnique Fédérale de Lausanne, Vol. 1. p. 218-223 6 p.Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review
Open AccessFile86 Downloads (Pure) -
Influence of Curing Cycle on the Build-up of Residual Stresses and the Effect on the Mechanical Performance of Fibre Composites
Miranda Maduro, M. A., 2021, Risø, Roskilde, Denmark: DTU Wind Energy. 247 p.Research output: Book/Report › Ph.D. thesis
Open AccessFile303 Downloads (Pure) -
Quantifying effects of manufacturing methods on fiber orientation in unidirectional composites using structure tensor analysis
Jeppesen, N., Mikkelsen, L. P., Dahl, A. B., Nymark, A. N. & Dahl, V. A., 2021, In: Composites Part A: Applied Science and Manufacturing. 149, 12 p., 106541.Research output: Contribution to journal › Journal article › Research › peer-review
Open AccessFile350 Downloads (Pure)
Projects
- 2 Finished
-
Experimental and numerical investigations of the cure shrinkage for predicting cure-induced wrinkles aimed for wind turbine blade manufacturing
Jørgensen, J. K. (PhD Student), Mikkelsen, L. P. (Main Supervisor), Andersen, T. (Supervisor), Haselbach, P. U. (Supervisor), Balzani, C. (Examiner) & Véronique, M. (Examiner)
01/12/2021 → 30/11/2024
Project: PhD
-
MADEBLADES: MADEBLADES - Manufacture and Design of Large Offshore Wind Turbine Blades
Andersen, T. (Project Manager), Mikkelsen, L. P. (PI), Rasmussen, S. (PI), Fraisse, A. (PI), Mortensen, U. A. (PI), Rojas, M. (PI), Pierce, R. (PI), Toftegaard, H. (PI) & Kumar, R. (PI)
01/03/2020 → 31/08/2023
Project: Research
Datasets
-
Quantifying effects of manufacturing methods on fiber orientation in unidirectional composites using structure tensor analysis
Nymark, A. N. (Contributor), Dahl, V. A. (Contributor), Mikkelsen, L. P. (Contributor), Dahl, A. B. (Contributor) & Jeppesen, N. (Contributor), Zenodo, 2021
DOI: 10.5281/zenodo.4446499, https://zenodo.org/record/4446499
Dataset