High precision tooling for heat assisted micro forging

Cannella, Emanuele (PhD Student)
Nielsen, Chris Valentin (Main Supervisor)
Lagos, Miguel (Examiner)
Martins, Paulo Antonio Firme (Examiner)
Zhang, Yubin (Examiner)
Tang, Peter Torben (Supervisor)
Bay, Niels Oluf (Supervisor)

Department of Mechanical Engineering

Project Details

Status	Finished
Effective start/end date	01/05/2016 → 12/09/2019

1 Ph.D. thesis

High precision tooling for electrical sintering of titanium and permanent magnets
Cannella, E., 2019, Kgs. Lyngby: Technical University of Denmark. 196 p.
Research output: Book/Report › Ph.D. thesis › Research

Open Access
File
85 Downloads (Pure)