• Produktionstorvet, 427, 323B

    2800 Kgs. Lyngby

    Denmark

20072020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Journal article
2020

Characterization of near-zero pressure powder injection moulding with sacrificial mould by using fingerprint geometries

Zhang, Y., Basso, A., Christensen, S. E., Pedersen, D. B., Staal, L., Valler, P. & Hansen, H. N., 2020, (Accepted/In press) In : CIRP annals.

Research output: Contribution to journalJournal articleResearchpeer-review

Experimental Characterization and Simulation of Thermoplastic Polymer Flow Hesitation in Thin-Wall Injection Molding Using Direct In-Mold Visualization Technique

Regi, F., Guerrier, P., Zhang, Y. & Tosello, G., 2020, In : Micromachines. 11, 4, 13 p., 428.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
40 Downloads (Pure)
Open Access
File
32 Downloads (Pure)

Quantitative calibration of conductive pattern growth via electroless copper plating at nano-resolution

Chen, Y., Liu, Y., Xu, W., Zhang, Y. & Nie, H-Y., 2020, In : Surface Topography: Metrology and Properties. 8, 3, 11 p., 035003.

Research output: Contribution to journalJournal articleResearchpeer-review

Selective coaxial ink 3D printing for single-pass fabrication of smart elastomeric foam with embedded stretchable sensor

Xu, J., Zhang, X., Liu, Y., Zhang, Y., Nie, H. Y., Zhang, G. & Gao, W., 2020, In : Additive Manufacturing. 36, 9 p., 101487.

Research output: Contribution to journalJournal articleResearchpeer-review

Study of the distribution of rubber particles in ground tire rubber/polypropylene blends

Basso, A., Zhang, Y., Linnemann, L. & Hansen, H. N., 2020, (Accepted/In press) In : Materials Today: Proceedings.

Research output: Contribution to journalJournal articleResearchpeer-review

2019

Breaking the Limit of Micro-Ductility in Oxide Glasses

Januchta, K., Stepniewska, M., Jensen, L. R., Zhang, Y., Somers, M. A. J., Bauchy, M., Yue, Y. & Smedskjær, M. M., 2019, In : Advanced Science. 6, 18, 9 p., 1901281.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
98 Downloads (Pure)

Functionality characterization of injection moulded micro-structured surfaces

Regi, F., Doest, M., Loaldi, D., Li, D., Frisvad, J. R., Tosello, G. & Zhang, Y., 2019, In : Precision Engineering. 60, p. 594-601

Research output: Contribution to journalJournal articleResearchpeer-review

Optimization of corner micro end milling by finite element modelling for machining thin features

Davoudinejad, A., Li, D., Zhang, Y. & Tosello, G., 2019, In : Procedia CIRP. 82, p. 362-367

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
115 Downloads (Pure)
2018

A method for the characterization of the reflectance of anisotropic functional surfaces

Regi, F., Nielsen, J. B., Li, D., Zhang, Y., Frisvad, J. R., Aanæs, H. & Tosello, G., 2018, In : Surface Topography: Metrology and Properties. 6, 3, 7 p., 034005.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
178 Downloads (Pure)

A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars

Zhang, Y., Pedersen, D. B., Mischkot, M., Calaon, M., Baruffi, F. & Tosello, G., 2018, In : Journal of Visualized Experiments. 138, 7 p., e57335.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
339 Downloads (Pure)

A study of laser surface modification of polymers: A comparison in air and water

Marla, D., Andersen, S. A., Zhang, Y., Hattel, J. H. & Spangenberg, J., 2018, In : Journal of Manufacturing Processes. 32, p. 432-437

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
145 Downloads (Pure)

Investigation of product and process fingerprints for fast quality assurance in injection molding of micro-structured components

Giannekas, N., Kristiansen, P. M., Zhang, Y. & Tosello, G., 2018, In : Micromachines. 9, 12, 23 p., 661.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
189 Downloads (Pure)
161 Downloads (Pure)

Modeling of nanosecond pulsed laser processing of polymers in air and water

Marla, D., Zhang, Y., Hattel, J. H. & Spangenberg, J., 2018, In : Modelling and Simulation in Materials Science and Engineering. 26, 5, 21 p., 055005.

Research output: Contribution to journalJournal articleResearchpeer-review

1 Downloads (Pure)
2017

A Soft Tooling process chain employing Additive Manufacturing for injection molding of a 3D component with micro pillars

Zhang, Y., Pedersen, D. B., Segebrecht Gøtje, A. & Mischkot, M., 2017, In : Journal of Manufacturing Processes. 27, p. 138–144

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
179 Downloads (Pure)
2016

A computational model for heterogeneous heating during pulsed laser irradiation of polymers doped with light-absorbing microparticles

Marla, D., Zhang, Y., Jabbaribehnam, M., Sonne, M. R., Spangenberg, J. & Hattel, J. H., 2016, In : Applied Physics A. 122, 12, 9 p., 1042.

Research output: Contribution to journalJournal articleResearchpeer-review

1 Downloads (Pure)
2015

Replication of Micro pillars by PEEK injection moulding with CrN coated Ni tool

Zhang, Y., Hansen, H. N. & Sørensen, S., 2015, In : International Journal of Advanced Manufacturing Technology. 80, 1, p. 383-388

Research output: Contribution to journalJournal articleResearchpeer-review

2013

An explanation of the mechanism for laser induced selective activation using diffusion theory

Zhang, Y., Hansen, H. N., Hattel, J. H., Tang, P. T., Nielsen, J. S. & Tutum, C. C., 2013, In : Nami Jishu yu Jingmi Gongcheng. 11, 2, p. 97-104

Research output: Contribution to journalJournal articleResearchpeer-review

Verification of a characterization method of the laser-induced selective activation based on industrial lasers

Zhang, Y., Hansen, H. N., Tang, P. T. & Nielsen, J. S., 2013, In : International Journal of Advanced Manufacturing Technology. 68, p. 1775–1783

Research output: Contribution to journalJournal articleResearchpeer-review

2011

An Explanation of the Selective Plating of Laser Machined Surfaces using Surface Tension Components

Zhang, Y., Kontogeorgis, G. & Hansen, H. N., 2011, In : Journal of Adhesion Science and Technology. 25, p. 2101-2111

Research output: Contribution to journalJournal articleResearchpeer-review

Selective metallization of polymers using laser induced surface activation (LISA)—characterization and optimization of porous surface topography

Zhang, Y., Hansen, H. N., De Grave, A., Tang, P. T. & Nielsen, J. S., 2011, In : International Journal of Advanced Manufacturing Technology. 55, 5-8, p. 573-580

Research output: Contribution to journalJournal articleResearchpeer-review