• Produktionstorvet, 427, 323B

    2800 Kgs. Lyngby

    Denmark

20072020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference abstract in proceedings
2019

3d Printed Mold for Powder Injection Molding Process

Basso, A., Mendez Ribo, M., Danielak, A. H., Yang, B., Kjeldsteen, P., Valler, P., Pedersen, D. B. & Zhang, Y., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 71-74

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
97 Downloads (Pure)

Simulation of thin features machining by micro end-milling using finite element modelling

Davoudinejad, A., Li, D., Zhang, Y. & Tosello, G., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 120-121

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
34 Downloads (Pure)
2018

Assessment of sub-mm features replication capability in injection moulding using a multi-cavity tool produced by additive manufacturing

Davoudinejad, A., Charalambis, A., Tosello, G., Zhang, Y., Calaon, M., Pedersen, D. B. & Hansen, H. N., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 383-384

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
45 Downloads (Pure)

Evaluation of part consistency with photopolymer inserts in different injection moulding process parameters

Davoudinejad, A., Charalambis, A., Zhang, Y., Calaon, M., Tosello, G. & Hansen, H. N., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D. B., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 253-254

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
22 Downloads (Pure)

Pitch measurements validation of a structural coloured steel insert using Scanning Confocal Microscopy (SCM) and Atomic Force Microscopy (AFM)

Loaldi, D., Zhang, Y., Calaon, M., Yang, Y., Guochin, P., Garnæs, J. & Tosello, G., 2018, Proceedings of the 18th International Conference of the european Society for Precision Engineering and Nanotechnology . Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 497-498

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
43 Downloads (Pure)
2008

Laser induced selective activation utilizing auto-catalytic electroless plating on polymer surfaces

Zhang, Y., Tang, P. T., Nielsen, J. S. & Hansen, H. N., 2008, Proc. 8th International Congress on Molded Interconnect Devices.

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review