• Produktionstorvet, 427, 323B

    2800 Kgs. Lyngby

    Denmark

20072020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2020

Characterization of near-zero pressure powder injection moulding with sacrificial mould by using fingerprint geometries

Zhang, Y., Basso, A., Christensen, S. E., Pedersen, D. B., Staal, L., Valler, P. & Hansen, H. N., 2020, (Accepted/In press) In : CIRP annals.

Research output: Contribution to journalJournal articleResearchpeer-review

Diamond machining of optical functional surface

Li, D., Zhang, Y., Zhang, X., Neo, D., Davoudinejad, A. & Tosello, G., 2020. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Effect of progressive tool wear on the functional performance of micro milling process of injection molding tool

Davoudinejad, A., Li, D., Zhang, Y. & Tosello, G., 2020, In : Procedia CIRP. 87, p. 159-163

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
27 Downloads (Pure)

Experimental Characterization and Simulation of Thermoplastic Polymer Flow Hesitation in Thin-Wall Injection Molding Using Direct In-Mold Visualization Technique

Regi, F., Guerrier, P., Zhang, Y. & Tosello, G., 2020, In : Micromachines. 11, 4, 13 p., 428.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
40 Downloads (Pure)
Open Access
File
32 Downloads (Pure)

Influences of micro-ridges orientation and position on the replication of micro-structured surfaces by injection molding

Regi, F., Basso, A., Kain, M., Loaldi, D., Li, D., Zhang, Y. & Tosello, G., 2020, In : AIP Conference Proceedings. 2205, 1, 5 p., 020013.

Research output: Contribution to journalConference articleResearchpeer-review

Manufacturing of three-dimensional optical functional surfaces by diamond engraving of RSA 905

Li, D., Zhang, Y., Zhang, X., Neo, D., Davoudinejad, A. & Tosello, G., 2020, In : Procedia CIRP. 87, p. 268-272

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
29 Downloads (Pure)

Pressure Driven Filling in the Injection Molding Process of Micro Structured Parts

Loaldi, D., Quiroga, S. E., Calaon, M., Zhang, Y. & Tosello, G., 2020. 4 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Quantitative calibration of conductive pattern growth via electroless copper plating at nano-resolution

Chen, Y., Liu, Y., Xu, W., Zhang, Y. & Nie, H-Y., 2020, In : Surface Topography: Metrology and Properties. 8, 3, 11 p., 035003.

Research output: Contribution to journalJournal articleResearchpeer-review

Replication of micro-structured surfaces by integrating AM with PIM

Basso, A., Mendez Ribo, M., Christensen, S. E., Kjeldsteen, P., Valler, P., Pedersen, D. B. & Zhang, Y., 2020. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Selective coaxial ink 3D printing for single-pass fabrication of smart elastomeric foam with embedded stretchable sensor

Xu, J., Zhang, X., Liu, Y., Zhang, Y., Nie, H. Y., Zhang, G. & Gao, W., 2020, In : Additive Manufacturing. 36, 9 p., 101487.

Research output: Contribution to journalJournal articleResearchpeer-review

Study of the distribution of rubber particles in ground tire rubber/polypropylene blends

Basso, A., Zhang, Y., Linnemann, L. & Hansen, H. N., 2020, (Accepted/In press) In : Materials Today: Proceedings.

Research output: Contribution to journalJournal articleResearchpeer-review

2019

3d Printed Mold for Powder Injection Molding Process

Basso, A., Mendez Ribo, M., Danielak, A. H., Yang, B., Kjeldsteen, P., Valler, P., Pedersen, D. B. & Zhang, Y., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 71-74

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
97 Downloads (Pure)

3d Printed Mold for Powder Injection Molding Process

Basso, A., Mendez Ribo, M., Danielak, A. H., Yang, B., Kjeldsteen, P., Valler, P., Pedersen, D. B. & Zhang, Y., 2019. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
58 Downloads (Pure)

Breaking the Limit of Micro-Ductility in Oxide Glasses

Januchta, K., Stepniewska, M., Jensen, L. R., Zhang, Y., Somers, M. A. J., Bauchy, M., Yue, Y. & Smedskjær, M. M., 2019, In : Advanced Science. 6, 18, 9 p., 1901281.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
98 Downloads (Pure)

Functionality characterization of injection moulded micro-structured surfaces

Regi, F., Doest, M., Loaldi, D., Li, D., Frisvad, J. R., Tosello, G. & Zhang, Y., 2019, In : Precision Engineering. 60, p. 594-601

Research output: Contribution to journalJournal articleResearchpeer-review

Injection Moulding optimization of nanostructured components using surface fingerprint

Loaldi, D., Zhang, Y., Calaon, M., Quagliotti, D. & Tosello, G., 2019. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Observation of Crack-Free Vickers Indents at 500 N in Annealed Caesium Aluminoborate Glass

Januchta, K., Stepniewska, M., Yue, Y., Jensen, L., Zhang, Y., Munch, S. S., Somers, M. A. J. & Smedskjær, M. M., 2019. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
59 Downloads (Pure)

Optimization of corner micro end milling by finite element modelling for machining thin features

Davoudinejad, A., Li, D., Zhang, Y. & Tosello, G., 2019, In : Procedia CIRP. 82, p. 362-367

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
115 Downloads (Pure)

Simulation of thin features machining by micro end-milling using finite element modelling

Davoudinejad, A., Li, D., Zhang, Y. & Tosello, G., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 120-121

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
34 Downloads (Pure)

Study of the Distribution of Rubber Particles in Ground Tire Rubber/Polypropylene Blends

Basso, A. & Zhang, Y., 2019. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

2018

A method for the characterization of the reflectance of anisotropic functional surfaces

Regi, F., Nielsen, J. B., Li, D., Zhang, Y., Frisvad, J. R., Aanæs, H. & Tosello, G., 2018, In : Surface Topography: Metrology and Properties. 6, 3, 7 p., 034005.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
178 Downloads (Pure)

A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars

Zhang, Y., Pedersen, D. B., Mischkot, M., Calaon, M., Baruffi, F. & Tosello, G., 2018, In : Journal of Visualized Experiments. 138, 7 p., e57335.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
339 Downloads (Pure)

Assessment of sub-mm features replication capability in injection moulding using a multi-cavity tool produced by additive manufacturing

Davoudinejad, A., Charalambis, A., Zhang, Y., Calaon, M., Pedersen, D. B., Tosello, G. & Hansen, H. N., 2018. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
131 Downloads (Pure)

Assessment of sub-mm features replication capability in injection moulding using a multi-cavity tool produced by additive manufacturing

Davoudinejad, A., Charalambis, A., Tosello, G., Zhang, Y., Calaon, M., Pedersen, D. B. & Hansen, H. N., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 383-384

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
45 Downloads (Pure)

A study of laser surface modification of polymers: A comparison in air and water

Marla, D., Andersen, S. A., Zhang, Y., Hattel, J. H. & Spangenberg, J., 2018, In : Journal of Manufacturing Processes. 32, p. 432-437

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
144 Downloads (Pure)

Dimensional Accuracy and Repeatability of 3D Printed Mould Inserts by DLP

Thorn, S., Bertelsen, J. G., M. Ribo, M., Li, D., Regi, F., Davoudinejad, A. & Zhang, Y., 2018. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
76 Downloads (Pure)

Dimensional Accuracy and Repeatability of Mould Inserts Manufactured by Mask Projection Vat-Photopolymerization

Bertelsen, J. G., Thorn, S., M. Ribo, M., Li, D., Regi, F., Davoudinejad, A., Zhang, Y. & Tosello, G., 2018. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
59 Downloads (Pure)

Evaluation of an improved micro milling strategy for the generation of tool steel micro features with optical functionality

Li, D., Davoudinejad, A., Zhang, Y. & Tosello, G., 2018. 5 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
223 Downloads (Pure)

Evaluation of part consistency with photopolymer inserts in different injection moulding process parameters

Davoudinejad, A., Charalambis, A., Zhang, Y., Calaon, M., Tosello, G. & Hansen, H. N., 2018. 2 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
74 Downloads (Pure)

Evaluation of part consistency with photopolymer inserts in different injection moulding process parameters

Davoudinejad, A., Charalambis, A., Zhang, Y., Calaon, M., Tosello, G. & Hansen, H. N., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D. B., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 253-254

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
22 Downloads (Pure)

Investigation of product and process fingerprints for fast quality assurance in injection molding of micro-structured components

Giannekas, N., Kristiansen, P. M., Zhang, Y. & Tosello, G., 2018, In : Micromachines. 9, 12, 23 p., 661.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
189 Downloads (Pure)
161 Downloads (Pure)

Modeling of nanosecond pulsed laser processing of polymers in air and water

Marla, D., Zhang, Y., Hattel, J. H. & Spangenberg, J., 2018, In : Modelling and Simulation in Materials Science and Engineering. 26, 5, 21 p., 055005.

Research output: Contribution to journalJournal articleResearchpeer-review

1 Downloads (Pure)

On the effect of machining strategy in micro milling of tool steel surface micro features with optical functionality

Li, D., Davoudinejad, A., Regi, F., Zhang, Y. & Tosello, G., 2018. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
45 Downloads (Pure)

Pitch measurements validation of a structural coloured steel insert using Scanning Confocal Microscopy (SCM) and Atomic Force Microscopy (AFM)

Loaldi, D., Zhang, Y., Calaon, M., Yang, Y., Guochin, P., Garnæs, J. & Tosello, G., 2018, Proceedings of the 18th International Conference of the european Society for Precision Engineering and Nanotechnology . Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 497-498

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
43 Downloads (Pure)
Open Access
File
68 Downloads (Pure)
2017

A comparison of reflectance properties on polymer micro-structured functional surface

Regi, F., Li, D., Nielsen, J. B., Zhang, Y., Tosello, G., Madsen, M. H., Frisvad, J. R. & Aanæs, H., 2017. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
213 Downloads (Pure)
Open Access
File
71 Downloads (Pure)

A Soft Tooling process chain employing Additive Manufacturing for injection molding of a 3D component with micro pillars

Zhang, Y., Pedersen, D. B., Segebrecht Gøtje, A. & Mischkot, M., 2017, In : Journal of Manufacturing Processes. 27, p. 138–144

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
179 Downloads (Pure)

A study on replication and quality correlation of on-part and on-runner polymer injection molded micro features

Giannekas, N., Tosello, G. & Zhang, Y., 2017. 4 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
151 Downloads (Pure)

Evaluation of optical functional surfaces on the injection moulding insert by micro milling process

Li, D., Davoudinejad, A., Zhang, Y., Regi, F., Tosello, G., Nielsen, J. B., Aanæs, H. & Frisvad, J. R., 2017, Proceedings of the euspen Special Interest Group Meeting: Micro/Nano Manufacturing. The European Society for Precision Engineering and Nanotechnology, 3 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Influence of Injection-Molding Process Parameters on Part Replication of Microstructures with Additively-Manufactured Soft Tooling Inserts WCMNM 2017 No.

Mischkot, M., Zhang, Y., Segebrecht Gøtje, A., Pedersen, D. B., Tosello, G. & Hansen, H. N., 2017. 4 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
202 Downloads (Pure)

Injection Moulding Pilot Production: Performance Assessment of Tooling Process Chains Based on Tool Inserts Made from Brass and A 3d Printed Photopolymer

Mischkot, M., Tosello, G., Nielsen, D. K. Y., Pedersen, D. B., Zhang, Y., Hofstätter, T., Herbin, L. & Hansen, H. N., 2017, Proceedings of ANTEC 2017. Society of Plastics Engineers, 5 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Investigation of Tooling for Anisotropic Optical Functional Surfaces

Li, D., Regi, F., Zhang, Y., Madsen, M. H., Nielsen, J. B. & Tosello, G., 2017. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
121 Downloads (Pure)

Modeling the Anisotropic Reflectance of a Surface with Microstructure Engineered to Obtain Visible Contrast after Rotation

Luongo, A., Falster, V., Doest, M. E. B., Li, D., Regi, F., Zhang, Y., Tosello, G., Nielsen, J. B., Aanæs, H. & Frisvad, J. R., 2017, Proceedings of the ICCV 2017 International Conference on Computer Vision. IEEE, p. 159-165 7 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
250 Downloads (Pure)

Process chain for fabrication of anisotropic optical functional surfaces on polymer components

Li, D., Zhang, Y., Regi, F., Tosello, G., Madsen, M. H., Nielsen, J. B., Aanæs, H. & Frisvad, J. R., 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology. The European Society for Precision Engineering and Nanotechnology, p. 305-306

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

3 Downloads (Pure)