Thomas Lundin Christiansen

2020

Synchrotron X-ray diffraction investigation of the effect of cryogenic treatment on the microstructure of Ti-6Al-4V

Meng, Y., Villa, M., Dahl, K. V., Christiansen, T. L. & Somers, M. A. J., 2020, In : Applied Surface Science. 502, 9 p., 144087.

Research output: Contribution to journal › Journal article › Research › peer-review

2019

Corrosion behaviour of Ni and nickel aluminide coatings exposed in a biomass fired power plant for two years

Wu, D. L., Dahl, K. V., Christiansen, T. L., Montgomery, M. & Hald, J., 2019, In : Surface and Coatings Technology. 362, p. 355-365

Research output: Contribution to journal › Journal article › Research › peer-review

7 Downloads (Pure)

High and Low Temperature Surface Hardening of Martensitic Stainless Steels

Tibollo, C., Villa, M., Christiansen, T. L. & Somers, M. A. J., 2019. 10 p.

Research output: Contribution to conference › Conference abstract for conference › Research › peer-review

45 Downloads (Pure)

High Temperature Solution Nitriding of Stainless Steels; Current Status and Future Trends

Christiansen, T. L., Villa, M., Tibollo, C., Dahl, K. V. & Somers, M. A. J., 2019. 10 p.

Research output: Contribution to conference › Paper › Research › peer-review

Open Access

File

39 Downloads (Pure)

Influence of atmosphere on microstructure and nitrogen content in AISI 316L fabricated by laser‐based powder bed fusion

Valente, E. H., Nadimpalli, V. K., Andersen, S. A., Pedersen, D. B., Christiansen, T. L. & Somers, M. A. J., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 244-247

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

30 Downloads (Pure)

New Developments in High Temperature Solution Nitriding of Stainless Steels

Christiansen, T. L., Villa, M., Tibollo, C., Dahl, K. V. & Somers, M. A. J., 2019. 10 p.

Research output: Contribution to conference › Paper › Research › peer-review

Open Access

File

34 Downloads (Pure)

Residual stress determination in oxidized bulk metallic glass using X-ray diffraction and FIB/DIC methods

Haratian, S., Niessen, F., Grumsen, F. B., Villa, M., Christiansen, T. L. & Somers, M. A. J., 2019. 1 p.

Research output: Contribution to conference › Conference abstract for conference › Research › peer-review

Open Access

File

Self-repair by stress-induced diffusion of noble elements during oxidation of Zr₄₈Cu₃₆Al₈Ag₈ bulk metallic glass

Haratian, S., Grumsen, F. B., Villa, M., Christiansen, T. L. & Somers, M. A. J., 2019, In : Scripta Materialia. 164, p. 126-129

Research output: Contribution to journal › Journal article › Research › peer-review

Surface hardening by gaseous oxidizing of (Zr₅₅Cu₃₀Al₁₀Ni₅)₉₈Er₂ bulk-metallic glass

Haratian, S., Grumsen, F. B., Villa, M., Christiansen, T. L. & Somers, M. A. J., 2019, In : Journal of Alloys and Compounds. 800, p. 456-461

Research output: Contribution to journal › Journal article › Research › peer-review

39 Downloads (Pure)

The Effect of Heat Treatment and Surface Hardening of 3D Printed Austenitic Stainless Steel AISI316l on Corrosion and Wear Properties

Valente, E. H., Christiansen, T. L. & Somers, M. A. J., 2019. 10 p.

Research output: Contribution to conference › Paper › Research › peer-review

Open Access

File

2 Downloads (Pure)

Thermochemical surface engineering: a playground for science and innovation: Paper

Christiansen, T. L. & Somers, M. A. J., 2019, In : I O P Conference Series: Materials Science and Engineering. 580, 1, 8 p., 012016 .

Research output: Contribution to journal › Conference article › Research › peer-review

Open Access

File

2018

151 Downloads (Pure)

Characterization of oxide layers developed on ZrCuAl-based bulk metallic glasses during gaseous thermochemical treatment

Haratian, S., Villa, M., Grumsen, F. B., Christiansen, T. L. & Somers, M. A. J., 2018. 1 p.

Research output: Contribution to conference › Conference abstract for conference › Research › peer-review

Open Access

File

72 Downloads (Pure)

Effects of Different Fuel Specifications and Operation Conditions on the Performance of Coated and Uncoated Superheater Tubes in Two Different Biomass-Fired Boilers

Wu, D., Dahl, K. V., Madsen, J. L., Christiansen, T. L., Montgomery, M. & Hald, J., 2018, In : Applied Energy Materials. 1, 4, p. 1463–1475

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

183 Downloads (Pure)

Expanded austenite; from fundamental understanding to predicting composition- and stress-depth profiles

Somers, M. A. J., Christiansen, T. L. & Winther, G., 2018. 10 p.

Research output: Contribution to conference › Paper › Research › peer-review

Open Access

File

Future trends in gaseous surface hardening of titanium and titanium alloys

Christiansen, T. L., Jellesen, M. S. & Somers, M. A. J., 2018, In : La Metallurgia Italiana. 9, p. 13-22

Research output: Contribution to journal › Journal article › Research › peer-review

270 Downloads (Pure)

Gaseous surface hardening of martensitic stainless steels

Tibollo, C., Villa, M., Christiansen, T. L. & Somers, M. A. J., 2018. 7 p.

Research output: Contribution to conference › Paper › Research › peer-review

Open Access

File

High temperature gas nitriding of Cr containing martensitic steels

Villa, M., Dahl, K. V. & Christiansen, T. L., 2018. 9 p.

Research output: Contribution to conference › Paper › Research › peer-review

88 Downloads (Pure)

High temperature solution-nitriding and low-temperature nitriding of AISI 316: Effect on pitting potential and crevice corrosion performance

Bottoli, F., Jellesen, M. S., Christiansen, T. L., Winther, G. & Somers, M. A. J., 2018, In : Applied Surface Science. 431, p. 24-31

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

223 Downloads (Pure)

High-temperature solution nitriding and low-temperature surface nitriding of 3D printed stainless steel

Valente, E. H., Christiansen, T. L. & Somers, M. A. J., 2018. 10 p.

Research output: Contribution to conference › Paper › Research › peer-review

Open Access

File

130 Downloads (Pure)

Microstructural investigations of Ni and Ni2Al3 coatings exposed in biomass power plants

Wu, D. L., Dahl, K. V., Christiansen, T. L., Montgomery, M. & Hald, J., 2018, In : Materials at High Temperatures. 12 p.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

59 Downloads (Pure)

Residual stress in expanded austenite on stainless steel; origin, measurement, and prediction

Somers, M. A. J., Kücükyildiz, Ö. C., Ormstrup, C. A., Alimadadi, H., Hattel, J. H., Christiansen, T. L. & Winther, G., 2018, In : Materials Performance and Characterization. 7, 4, p. 693-716

Research output: Contribution to journal › Review › Research › peer-review

Open Access

File

68 Downloads (Pure)

Surface hardening of Zr-Cu based bulk metallic glasses using gaseous thermochemical treatment

Haratian, S., Christiansen, T. L., Villa, M. & Somers, M. A. J., 2018. 1 p.

Research output: Contribution to conference › Conference abstract for conference › Research › peer-review

Open Access

File

2017

A case hardened component of titanium

Christiansen, T. L., Jellesen, M. S., Somers, M. A. J. & Gammeltoft-Hansen, N. B., 2 Jun 2017, IPC No. C23C8/34 , Patent No. WO2017207794, 7 Dec 2017, Priority date 2 Jun 2016, Priority No. EP20160172699

Research output: Patent

561 Downloads (Pure)

Application of aluminum diffusion coatings to mitigate the KCl-induced high-temperature corrosion

Kiamehr, S., Lomholt, T. N., Dahl, K. V., Christiansen, T. L. & Somers, M. A. J., 2017, In : Materials and Corrosion. 68, 1, p. 82–94 13 p.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

496 Downloads (Pure)

Characterization of Thermochemically Surface-Hardened Titanium by Light Optical Microscopy

Gammeltoft-Hansen, N., Munch, S. S., Jellesen, M. S., Somers, M. A. J. & Christiansen, T. L., 2017, In : Materials Performance and Characterization. 6, 3, 13 p.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

122 Downloads (Pure)

Effect of carbon on interstitial ordering and magnetic properties of ε-Fe2(N,C)_1-z

Brink, B., Ståhl, K., Christiansen, T. L., Frandsen, C., Hansen, M. F., Beran, P. & Somers, M. A. J., 2017, In : Journal of Alloys and Compounds. 694, p. 282-291

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

254 Downloads (Pure)

Hard Surface Layers by Pack Boriding and Gaseous Thermo-Reactive Deposition and Diffusion Treatments

Christiansen, T. L., Bottoli, F., Dahl, K. V., Gammeltoft-Hansen, N. B., Laursen, M. B. & Somers, M. A. J., 2017, In : Materials Performance and Characterization. 6, 4, p. 1-17

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

47 Downloads (Pure)

Measurement and tailoring of residual stress in expanded austenite on austenitic stainless steel

Fernandes, F. A. P., Christiansen, T. L., Winther, G. & Somers, M. A. J., 2017, In : Materials Science and Engineering A. 701, p. 167-173

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

101 Downloads (Pure)

On the elusive crystal structure of expanded austenite

Brink, B., Ståhl, K., Christiansen, T. L., Oddershede, J., Winther, G. & Somers, M. A. J., 2017, In : Scripta Materialia. 131, p. 59-62

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

Thermochemical Surface Engineering: A Playground for Science and Innovation

Christiansen, T. L., Dahl, K. V., Jellesen, M. S. & Somers, M. A. J., 2017, Proceedings of the 24th IFHTSE Congress . 12 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

201 Downloads (Pure)

The ternary Fe-C-N system: Homogeneous distributions of nitrogen and carbon

Brink, B., Ståhl, K., Christiansen, T. L. & Somers, M. A. J., 2017, In : Journal of Alloys and Compounds. 690, p. 431-437

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

2016

306 Downloads (Pure)

Composition-dependent variation of magnetic properties and interstitial ordering in homogeneous expanded austenite

Brink, B. K., Ståhl, K., Christiansen, T. L., Frandsen, C., Hansen, M. F. & Somers, M. A. J., 2016, In : Acta Materialia. 106, p. 32-39 8 p.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

158 Downloads (Pure)

Effect of Plastic Pre-straining on Residual Stress and Composition Profiles in Low-Temperature Surface-Hardened Austenitic Stainless Steel

Bottoli, F., Christiansen, T. L., Winther, G. & Somers, M. A. J., 2016, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 47, 8, p. 4001–4011

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

379 Downloads (Pure)

Low-Temperature Nitriding of Deformed Austenitic Stainless Steels with Various Nitrogen Contents Obtained by Prior High-Temperature Solution Nitriding

Bottoli, F., Winther, G., Christiansen, T. L., Dahl, K. V. & Somers, M. A. J., 2016, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 47, 8, p. 4146-4159

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

Low temperature surface hardening of stainless steel; the role of plastic deformation

Bottoli, F., Jespersen, F. N., Hattel, J. H., Winther, G., Christiansen, T. L. & Somers, M. A. J., 2016, Proceedings from the 23rd IFHTSE Congress . ASM International, p. 51-54

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

1 Downloads (Pure)

Martensitbildung in Fe-basierten Legierungen während der Erwärmung von Stickstoff-Siedetemperatur

Translated title of the contribution: Investigation of martensite formation in Fe basead alloys during heating from boiling nitrogen temperatureVilla, M., Christiansen, T. L., Hansen, M. F. & Somers, M. A. J., 2016, In : H T M. 71, 1, p. 12-19

Research output: Contribution to journal › Journal article › Research › peer-review

New strategy for testing new high nitrogen bearing steel for offshore wind turbines

Belfiore, N. P., Arcobello Varlese, F., Battistella, F., Blass, T., Cabral, A. M., Diehl, V., Gonzalez Garcia, J. R., Gorjão, P. F., Holweger, W., Kohlhepp, M., Christiansen, T. L., Ritzenhoff, R., Stocchi, D., Trojahn, W. & Dahl, K. V., 2016, In : Wind Engineering. 40, 5, p. 426-430 5 p.

Research output: Contribution to journal › Journal article › Research › peer-review

215 Downloads (Pure)

On the Carbon Solubility in Expanded Austenite and Formation of Hägg Carbide in AISI 316 Stainless Steel

Christiansen, T. L., Ståhl, K., Brink, B. & Somers, M. A. J., 2016, In : Steel Research International. 87, 11, p. 1395–1405 11 p.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

15 Downloads (Pure)

Sub-Zero Celsius treatment: a promising option for future martensitic stainless steels

Villa, M., Christiansen, T. L. & Somers, M. A. J., 2016, Proceedings of the 23rd IFHTSE Congress. ASM International, p. 317-325

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

2015

2 Downloads (Pure)

Characterisation of Wear Resistant Boride Layers on a Tool Steel by Activity Controlled Pack Boronising

Fernandes, F. A. P., Christiansen, T. L. & Somers, M. A. J., 2015, Surface Modification Technologies XXVIII. Proceedings of the Twenty Eighth International Conference on Surface Modification Technologies. Sudarshan, T. S., Vuoristo, P. & Koivuluoto, H. (eds.). VALARDOCS, p. 197-207

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Characterization of Transition Metal Carbide Layers Synthesized by Thermo-reactive Diffusion Processes

Laursen, M. B., Fernandes, F. A. P., Christiansen, T. L., Dahl, K. V. & Somers, M. A. J., 2015, Surface Modification Technologies XXVIII. Proceedings of the Twenty Eighth International Conference on Surface Modification Technologies. Sudarshan, T. S., Vuoristo, P. & Koivuluoto, H. (eds.). VALARDOCS, p. 643-654

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Gaseous processes for low temperature surface hardening of stainless steel

Somers, M. A. J. & Christiansen, T. L., 2015, Thermochemical Surface Engineering of Steels. Mittemeijer, E. J. & Somers, M. A. J. (eds.). Woodhead Publishing, p. 581-614

Research output: Chapter in Book/Report/Conference proceeding › Book chapter › Research › peer-review

Influence of Microstructure and Process Conditions on Simultaneous Low-Temperature Surface Hardening and Bulk Precipitation Hardening of Nanoflex®

Bottoli, F., Winther, G., Christiansen, T. L. & Somers, M. A. J., 2015, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 46A, 11, p. 5201-5216

Research output: Contribution to journal › Journal article › Research › peer-review

Influence of Plastic Deformation on Low Temperature Surface Hardening of Austenitic and Precipitation Hardening Stainless Steels by Gaseous Nitriding

Bottoli, F., Winther, G., Christiansen, T. L. & Somers, M. A. J., 2015, In : H T M. 70, 5, p. 228-238

Research output: Contribution to journal › Journal article › Research › peer-review

Influence of Plastic Deformation on Low Temperature Surface Hardening of Austenitic Stainless Steel by Gaseous Nitriding

Bottoli, F., Winther, G., Christiansen, T. L. & Somers, M. A. J., 2015, Surface Modification Technologies XXVIII. Proceedings of the Twenty Eighth International Conference on Surface Modification Technologies. Sudarshan, T. S., Vuoristo, P. & Koivuluoto, H. (eds.). VALARDOCS, p. 211-222

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Influence of Plastic Deformation on Low-Temperature Surface Hardening of Austenitic Stainless Steel by Gaseous Nitriding

Bottoli, F., Winther, G., Christiansen, T. L. & Somers, M. A. J., 2015, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 46A, 6, p. 2579-2590

Research output: Contribution to journal › Journal article › Research › peer-review

Influence of plastic deformation on low temperature surface hardening of stainless steel by gaseous nitriding

Bottoli, F., Winther, G., Christiansen, T. L. & Somers, M. A. J., 2015, Heat Treating 2015: Proceedings of the 28th ASM Heat Treating Society Conference. ASM International, p. 612-619

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

223 Downloads (Pure)

Investigation of Martensite Formation in Fe Based Alloys During Heating From Boiling Nitrogen Temperature

Villa, M., Christiansen, T. L., Hansen, M. F. & Somers, M. A. J., 2015, In : La Metallurgia Italiana. 11, 12, p. 39-46

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

Low temperature surface hardening of stainless steel

Somers, M. A. J. & Christiansen, T. L., 2015, Thermochemical Surface Engineering of Steels. Mittemeijer, E. J. & Somers, M. A. J. (eds.). Woodhead Publishing, p. 557-579

Research output: Chapter in Book/Report/Conference proceeding › Book chapter › Research › peer-review

1 Downloads (Pure)

Microstructural Characterization of Low Temperature Gas Nitrided Martensitic Stainless Steel

Fernandes, F. A. P., Christiansen, T. L. & Somers, M. A. J., 2015, Surface Modification Technologies XXVIII. Proceedings of the Twenty Eighth International Conference on Surface Modification Technologies. Sudarshan, T. S., Vuoristo, P. & Koivuluoto, H. (eds.). VALARDOCS, p. 223-233

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review