Stela Canulescu

Search results

• 2023

  Advances in the one-step synthesis of 2D and 3D sulfide materials grown by pulsed laser deposition assisted by a sulfur thermal cracker

  Esterlich, J. R., Affannoukoue, K., Kaupmees, R., Miakota, D. I., Engberg, S. L. J., Grossberg-Kuusk, M., Schou, J. & Canulescu, S., 2023, In: Applied Physics A: Materials Science & Processing. 129, 50th Anniversary of Applied Physics, 8 p., 59.

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Pulsed Laser Deposition 100%
  • Liquid Film 71%
  • Sulfur 71%
  • Liquid Films 71%
  • Sulfide 57%

• A novel two-step route to unidirectional growth of multilayer MoS₂ nanoribbons

  Miakota, D. I., Ghimire, G., Ulaganathan, R., Espindola Rodriguez, M. & Canulescu, S., 2023, In: Applied Surface Science. 619, 8 p., 156748.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Nanoribbon 100%
  • Transition Metal Dichalcogenides 80%
  • Multilayers 80%
  • Monolayers 60%
  • Liquid 40%
  5 Downloads (Pure)

• Dual-purpose tunnel oxide passivated contact on silicon photoelectrodes with high photovoltages for tandem photoelectrochemical devices enabling unassisted water splitting

  Moon, C., Alves Martinho, F. M., Jung, G., Koh, J., Assar, A., Nam, S. W., Canulescu, S. & Shin, B., 2023, (Accepted/In press) In: Journal of Materials Chemistry A. 11 p.

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Oxide 100%
  • Tunnel 100%
  • Device 66%
  • Energy Gaps (Solid State) 33%
  • Photovoltage 33%

• High-Performance Photodetector and Angular-Dependent Random Lasing from Long-Chain Organic Diammonium Sandwiched 2D Hybrid Perovskite Non-Linear Optical Single Crystal

  Ulaganathan, R. K., Roy, P. K., Mhatre, S. M., Murugesan, R. C., Chen, W. L., Lai, M. H., Subramanian, A., Lin, C. Y., Chang, Y. M., Canulescu, S., Rozhin, A., Liang, C. T. & Sankar, R., 2023, In: Advanced Functional Materials. 2023, 10 p., 2214078.

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Single Crystals 100%
  • Single Crystalline Solid 100%
  • Single Crystal 100%
  • Perovskites 66%
  • Lasing 50%

• High-Performance Photodetector and Angular-Dependent Random Lasing from LongChain Organic Diammonium Sandwiched 2D Hybrid Perovskite Non-linear Optical Single Crystal.

  Ulaganathan, R. K., Roy, P. K., Mhatre, S. M., Murugesan, R. C., Chen, W-L., Lai, M-H., Subramanian, A., Lin, C., Chang, Y-M., Canulescu, S., Rozhin, A., Liang, C-T. & Sankar, R., 2023, (Accepted/In press) In: Advanced Functional Materials. 30 p.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Single Crystals 100%
  • Single Crystalline Solid 100%
  • Single Crystal 100%
  • Perovskites 66%
  • Lasing 50%
  51 Downloads (Pure)
• 2022

  A facile strategy for the growth of high-quality tungsten disulfide crystals mediated by oxygen-deficient oxide precursors

  Miakota, D. I., Unocic, R. R., Bertoldo, F., Ghimire, G., Engberg, S., Geohegan, D., Thygesen, K. S. & Canulescu, S., 24 Jun 2022, In: Nanoscale. 14, 26, p. 9485-9497

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Crystalline Material 100%
  • Oxygen Vacancy 100%
  • Crystal 100%
  • Oxide 50%
  • Dioxygen 50%
  21 Downloads (Pure)

• Cu₂ZnSnS₄ from oxide precursors grown by pulsed laser deposition for monolithic CZTS/Si tandem solar cells

  Gansukh, M., Assar, A., Martinho, F., Mariño, S. L., Espíndola-Rodríguez, M., Engberg, S., Stamate, E., Schou, J., Hansen, O. & Canulescu, S., 2022, In: Applied Physics A. 128, 3, 6 p.

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Silicon 100%
  • Oxide 83%
  • Surface Properties 66%
  • Tandem Solar Cell 66%
  • Cell 66%

• Gettering in PolySi/SiOx Passivating Contacts Enables Si-Based Tandem Solar Cells with High Thermal and Contamination Resilience

  Assar, A., Martinho, F., Larsen, J., Saini, N., Shearer, D., Moro, M. V., Stulen, F., Grini, S., Engberg, S., Stamate, E., Schou, J., Vines, L., Canulescu, S., Platzer-Björkman, C. & Hansen, O., 2022, In: ACS Applied Materials and Interfaces. 14, 12, p. 14342-14358

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Bottom Cell 100%
  • Gettering 60%
  • Crystalline Material 60%
  • Contamination 40%
  • Reduction 40%

• Silver-substituted (Ag1-xCux)2ZnSnS4 solar cells from aprotic molecular inks

  Engberg, S., Gansukh, M., Martinho, F., Stamate, E., Hansen, O., Schou, J. & Canulescu, S., 2022, In: Ceramics International. 48, 15, p. 21483-21491

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • X-Ray Diffraction 100%
  • Kesterite 66%
  • Sample 33%
  • Grain Growth 33%
  • Silver 33%
  19 Downloads (Pure)

• The effect of soft-annealing on sputtered Cu₂ZnSnS₄ thin-film solar cells

  Tsekou, A., Martinho, F., Miakota, D., Canulescu, S. & Engberg, S., Nov 2022, In: Applied Physics A: Materials Science and Processing. 128, 11, 9 p., 970.

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Absorber 100%
  • Temperature 80%
  • Annealing 60%
  • Devices 60%
  • Solar Cell 40%
• 2021

  Intrinsic Defects in MoS₂ Grown by Pulsed Laser Deposition: From Monolayers to Bilayers

  Bertoldo, F. F., Unocic, R. R., Lin, Y-C., Sang, X., Puretzky, A. A., Yu, Y., Miakota, D. I., Rouleau, C. M., Schou, J., Thygesen, K. S., Geohegan, D. B. & Canulescu, S., 2021, In: ACS Nano. 15, 2, p. 2858–2868

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Molybdenum Sulfide 100%
  • Pulsed Laser Deposition 62%
  • Monolayer 50%
  • Point Defect 50%
  • Monolayers 50%
  137 Downloads (Pure)

• Non-destructive determination of phase, size, and strain of individual grains in polycrystalline photovoltaic materials

  Lucas, M. M., Ramos, T., Jørgensen, P. S., Canulescu, S., Kenesei, P., Wright, J., Poulsen, H. F. & Andreasen, J. W., 2021, In: Journal of Alloys and Compounds. 887, 13 p., 161364.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Strain 100%
  • Absorber 75%
  • Liquid Films 75%
  • Photovoltaics 50%
  • Microstructure 50%
  67 Downloads (Pure)
• 2020

  Characterization of Cu₂ZnSnS₄ Particles Obtained by the Hot-Injection Method

  Engberg, S. L. J., Symonowicz, J., Schou, J., Canulescu, S. & Jensen, K. M. Ø., 2020, In: ACS Omega. 5, 18, p. 10501-10509

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • X-Ray Diffraction 100%
  • Procedure 66%
  • Synchrotron X-Ray Diffraction 50%
  • Kesterite 50%
  • Standard 50%
  136 Downloads (Pure)

• Energy band alignment at the heterointerface between CdS and Ag-alloyed CZTS

  Gansukh, M., Li, Z., Espindola Rodriguez, M., Engberg, S. L. J., Martinho, F. M. A., Mariño, S. L., Stamate, E., Schou, J., Hansen, O. & Canulescu, S., 2020, In: Scientific Reports. 10, 11 p., 18388 .

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Cadmium Sulfide 100%
  • Alloying 37%
  • Energy 37%
  • Depth Profiling 25%
  • Kesterite 25%
  219 Downloads (Pure)

• In situ laser reflectivity to monitor and control the nucleation and growth of atomically-thin 2D materials

  Puretzk, A. A., Lin, Y-C., Liu, C., Strasser, A. M., Yu, Y., Canulescu, S., Rouleau, C. M., Xiao, K., Duscher, G. & Geohegan, D. B., 2020, In: 2D materials. 7, 2, 11 p., 025048.

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Nucleation 100%
  • Growth 83%
  • Laser 66%
  • Reflectivity 50%
  • Probe 50%

• Monolithic thin-film chalcogenide–silicon tandem solar cells enabled by a diffusion barrier

  Hajijafarassar, A., Martinho, F. M. A., Stulen, F., Grini, S., Mariño, S. L., Espindola Rodriguez, M., Döbeli, M., Canulescu, S., Stamate, E., Gansukh, M., Engberg, S. L. J., Crovetto, A., Vines, L., Schou, J. & Hansen, O., 2020, In: Solar Energy Materials and Solar Cells. 207, 11 p., 110334.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • High Temperature 100%
  • Tandem Solar Cell 100%
  • Thin Films 75%
  • Bottom Cell 75%
  • Diffusion Barrier 50%
  32 Downloads (Pure)

• Nitride-based interfacial layers for monolithic tandem integration of new solar energy materials on Si: The case of CZTS

  Martinho, F. M. A., Hajijafarassar, A., Mariño, S. L., Espindola Rodriguez, M., Engberg, S. L. J., Gansukh, M., Stulen, F., Grini, S., Canulescu, S., Stamate, E., Crovetto, A., Vines, L., Schou, J. & Hansen, O., 2020, In: Applied Energy Materials. 3, 5, p. 4600–4609

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Silicon 100%
  • Chalcogenide Thin-Film Solar Cells 100%
  • Photovoltaics 66%
  • Interfacial Layer 66%
  • Bottom Cell 66%
  37 Downloads (Pure)

• Oxide route for production of Cu₂ZnSnS₄ solar cells by pulsed laser deposition

  Gansukh, M., Mariño, S. L., Espindola Rodriguez, M., Engberg, S. L. J., Martinho, F. M. A., Hajijafarassar, A., Schjødt, N. C., Stamate, E., Hansen, O., Schou, J. & Canulescu, S., 2020, In: Solar Energy Materials and Solar Cells. 215, 8 p., 110605.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Oxide 100%
  • Solar Cell 57%
  • Pulsed Laser Deposition 42%
  • Route 42%
  • Liquid Films 42%
  22 Downloads (Pure)

• Persistent Double-Layer Formation in Kesterite Solar Cells: A Critical Review

  Martinho, F. M. A., Mariño, S. L., Espindola Rodriguez, M., Hajijafarassar, A., Stulen, F., Grini, S., Döbeli, M., Gansukh, M., Engberg, S. L. J., Stamate, E., Vines, L., Schou, J., Hansen, O. & Canulescu, S., 2020, In: ACS Applied Materials and Interfaces. 12, 35, p. 39405–39424

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Kesterite 100%
  • Solar Cell 25%
  • Occurrence 25%
  • Research 18%
  • Show 18%
  33 Downloads (Pure)

• Resonant x-ray ptychographic nanotomography of kesterite solar cells

  Fevola, G., Jørgensen, P. S., Verezhak, M., Slyamov, A., Crovetto, A., Balogh, Z. I., Rein, C., Canulescu, S. & Andreasen, J. W., 2020, In: Physical Review Research. 2, 1, 12 p., 013378.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Kesterite 100%
  • Sulfide 40%
  • Zinc Sulfide 20%
  • Active Layer 15%
  • Procedure 15%
  143 Downloads (Pure)

• Spin-coated Cu₂ZnSnS₄ solar cells: A study on the transformation from ink to film

  Engberg, S. L. J., Martinho, F. M. A., Gansukh, M., Aguilar Protti, A. C. D., Küngas, R., Stamate, E., Hansen, O., Canulescu, S. & Schou, J., 2020, In: Scientific Reports. 10, 16 p., 20749 .

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Annealing 100%
  • Temperature 66%
  • Liquid Films 66%
  • Ink 50%
  • Devices 50%
  78 Downloads (Pure)
• 2019

  Physical routes for the synthesis of kesterite: Topical Review

  Ratz, T., Brammertz, G., Caballero, R., León, M., Canulescu, S., Schou, J., Gütay, L., Pareek, D., Taskesen, T., Kim, D. -H., Kang, J. -K., Malerba, C., Redinger, A., Saucedo, E., Shin, B., Tampo, H., Timmo, K., Nguyen, N. D. & Vermang, B., 2019, In: Journal of Physics: Energy. 1, 4, 23 p., 042003.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Efficiency 100%
  • Kesterite 100%
  • Thin Films 66%
  • Photovoltaics 66%
  • Evaporation 33%
  85 Downloads (Pure)
• 2018

  Liquid phase assisted grain growth in Cu2ZnSnS4 nanoparticle thin films by alkali element incorporation

  Engberg, S. L. J., Canulescu, S. & Schou, J., 2018, In: R S C Advances. 8, 13, p. 7152-7158

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Grain Growth 100%
  • Nanoparticle 50%
  • Liquid Film 50%
  • Liquid Films 50%
  • Alkali Metal 33%
  464 Downloads (Pure)

• Pulsed laser deposition of chalcogenide sulfides from multi- and single-component targets: the non-stoichiometric material transfer

  Schou, J., Ganskukh, M., Ettlinger, R. B., Cazzaniga, A. C., Grossberg, M., Kauk-Kuusik, M. & Canulescu, S., 2018, In: Applied Physics A: Materials Science & Processing. 124, 1, 78.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  • Sulfide 100%
  • Liquid Film 100%
  • Pulsed Laser Deposition 75%
  • Mass Transfer 75%
  • Multicomponent Reaction 50%
• 2017

  Nonstoichiometric transfer during laser ablation of metal alloys

  Canulescu, S., Döbeli, M., Yao, X., Lippert, T., Amoruso, S. & Schou, J., 2017, In: Physical Review Materials. 1, 7, 7 p., 073402.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File
  326 Downloads (Pure)

• Ultra-thin Cu2ZnSnS4 solar cell by pulsed laser deposition

  Cazzaniga, A. C., Crovetto, A., Yan, C., Sun, K., Hao, X., Estelrich, J. R., Canulescu, S., Stamate, E., Pryds, N., Hansen, O. & Schou, J., 2017, In: Solar Energy Materials & Solar Cells. 166, p. 91–99

  Research output: Contribution to journal › Journal article › Research › peer-review

  File

  • Optical Loss 100%
  • Pulsed Laser Deposition 75%
  • Devices 50%
  • Solution 25%
  • Microparticulate 25%
  477 Downloads (Pure)
• 2016

  Band gap tuning of amorphous Al oxides by Zr alloying

  Canulescu, S., Jones, N. C., Borca, C. N., Piamonteze, C., Rechendorff, K., Gudla, V. C., Bordo, K., Nielsen, L. P., Hoffmann, S. V., Almtoft, K. P., Ambat, R. & Schou, J., 2016, In: Applied Physics Letters. 109, 4 p., 091902.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Gaps 100%
  • Mixed Oxides 60%
  • Oxide 40%
  • Al2O3 40%
  • Amorphous Material 40%
  476 Downloads (Pure)

• Formation of copper tin sulfide films by pulsed laser deposition at 248 and 355 nm

  Ettlinger, R. B., Crovetto, A., Canulescu, S., Cazzaniga, A. C., Ravnkilde, L., Youngman, T. H., Hansen, O., Pryds, N. & Schou, J., 2016, In: Applied Physics A: Materials Science & Processing. 122, 4, p. 1-10 10 p.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Tin 100%
  • Fluence 80%
  • Copper 80%
  • Ablation 40%
  • Transferring 40%
  587 Downloads (Pure)

• Optical and electrical properties of polycrystalline and amorphous Al-Ti thin films

  Canulescu, S., Borca, C. N., Rechendorff, K., Daviðsdóttir, S., Pagh Almtoft, K., Nielsen, L. P. & Schou, J., 2016, In: Applied Physics Letters. 108, 14, 5 p., 141909.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Polycrystalline 100%
  • Liquid Films 100%
  • Optical Properties 50%
  • Thin Films 50%
  • Transport Properties 50%
  807 Downloads (Pure)
• 2015

  Effect of interfacial oxide thickness on the photocatalytic activity of magnetron-sputtered TiO2coatings on aluminum substrate

  Daviðsdóttir, S., Petit, J-P., Shabadi, R., Canulescu, S., Almtoft, K. P., Dirscherl, K., Andersen, I. H. & Ambat, R., 2015, In: Physica Status Solidi. A: Applications and Materials Science (Online). 212, 12, p. 2805-2815

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Titanium Dioxide 100%
  • Coating Agent 80%
  • Coating 80%
  • Photocurrent 50%
  • Thickness 30%

• High Frequency Anodising of Aluminium-TiO₂ Surface Composites: Anodising Behaviour and Optical Appearance

  Gudla, V. C., Bordo, K., Jensen, F., Canulescu, S., Yuksel, S., Simar, A. & Ambat, R., 2015, In: Surface and Coatings Technology. 277, p. 67-73

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Anodizing 100%
  • Surface 62%
  • Hardness 50%
  • Titanium Dioxide 50%
  • Composite Material 37%
  468 Downloads (Pure)

• Pulsed laser deposition from ZnS and Cu₂SnS₃ multicomponent targets

  Ettlinger, R. B., Cazzaniga, A. C., Canulescu, S., Pryds, N. & Schou, J., 2015, In: Applied Surface Science. 336, p. 385-390

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Pulsed Laser Deposition 100%
  • Rate 100%
  • Reaction Stoichiometry 50%
  • Energy Dispersive X-Ray Spectroscopy 50%
  • Liquid Film 50%
  732 Downloads (Pure)

• Simulation of reflectance from white-anodised aluminium surfaces using polyurethane–TiO2 composite coatings

  Gudla, V. C., Johansen, V. E., Ambat, R., Canulescu, S. & Schou, J., 2015, In: Journal of Materials Science. 50, 13, p. 4565-4575 11 p.

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Titanium Dioxide 100%
  • Surfaces 46%
  • Surface 46%
  • Polyurethan 26%
  • Aluminum 20%
  1 Downloads (Pure)
• 2014

  Appearance of anodised aluminium: Effect of alloy composition and prior surface finish

  Aggerbeck, M., Canulescu, S., Dirscherl, K., Johansen, V. E., Engberg, S. L. J., Schou, J. & Ambat, R., 2014, In: Surface and Coatings Technology. 254, p. 28-41

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Alloy 100%
  • Appearance 80%
  • Surface 80%
  • Finish 40%
  • Anodizing 40%

• Band gap structure modification of amorphous anodic Al oxide film by Ti-alloying

  Canulescu, S., Rechendorff, K., Borca, C. N., Jones, N. C., Bordo, K., Schou, J., Nielsen, L. P., Hoffmann, S. V. & Ambat, R., 2014, In: Applied Physics Letters. 104, 12, 5 p., 121910.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Al2O3 100%
  • Amorphous Material 100%
  • Single Crystal 33%
  • Crystalline Material 33%
  • Aluminum Oxide 33%
  1082 Downloads (Pure)

• Interfacial Structure and Photocatalytic Activity of Magnetron Sputtered TiO₂ on Conducting Metal Substrates

  Daviðsdóttir, S., Petit, J-P., Mermoux, M., Shabadi, R., Canulescu, S., Almtoft, K. P., Dirscherl, K. & Ambat, R., 2014, In: A C S Applied Materials and Interfaces. 6, 24, p. 22224–22234

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Titanium Dioxide 100%
  • Coating Agent 58%
  • Coating 58%
  • Nickel 50%
  • Copper 50%

• Nanosecond laser ablation and deposition of silver, copper, zinc and tin

  Cazzaniga, A. C., Ettlinger, R. B., Canulescu, S., Schou, J. & Pryds, N., 2014, In: Applied Physics A: Materials Science & Processing. 117, p. 89–92

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Deposition 100%
  • Metal 60%
  • Ablation 40%
  • Pulses 40%
  • Nanoparticle 40%

• Structure of anodized Al–Zr sputter deposited coatings and effect on optical appearance

  Gudla, V. C., Canulescu, S., Shabadi, R., Rechendorff, K., Dirscherl, K. & Ambat, R., 2014, In: Applied Surface Science. 317, p. 1113–1124

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Coating 100%
  • Microstructure 80%
  • Anodizing 60%
  • Light 40%
  • High Resolution 20%
• 2013

  Deposition of matrix-free fullerene films with improved morphology by matrix-assisted pulsed laser evaporation (MAPLE)

  Canulescu, S., Schou, J., Fæster, S., Hansen, K. V. & Conseil, H., 2013, In: Chemical Physics Letters. 588, p. 119-123

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Matrix 100%
  • Fluence 57%
  • Evaporation 57%
  • Liquid Film 57%
  • Liquid Films 57%

• Functionalized ormosil scaffolds processed by direct laser polymerization for application in tissue engineering

  Matei, A., Schou, J., Canulescu, S., Zamfirescu, M., Albu, C., Mitu, B., Buruiana, E. C., Buruiana, T., Mustaciosu, C., Petcu, I. & Dinescu, M., 2013, In: Applied Surface Science. 278, p. 357–361

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Protein 100%
  • Polymerization Reaction 100%
  • Application 100%
  • Structure 100%
  • Evaporation 50%

• Investigation of photocatalytic activity of titanium dioxide deposited on metallic substrates by DC magnetron sputtering

  Daviðsdóttir, S., Canulescu, S., Dirscherl, K., Schou, J. & Ambat, R., 2013, In: Surface and Coatings Technology. 216, p. 35-45

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Coating Agent 100%
  • Coating 100%
  • Titanium Dioxide 75%
  • Stainless Steel 62%
  • Aluminum 50%
  1 Downloads (Pure)

• Nanoscale surface potential imaging of the photocatalytic TiO₂ films on aluminum

  Daviðsdóttir, S., Dirscherl, K., Canulescu, S., Shabadi, R. & Ambat, R., 2013, In: R S C Advances. 3, 45, p. 23296-23302

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Titanium Dioxide 100%
  • Surface Potential 50%
  • Coating Agent 50%
  • Coating 50%
  • Illumination 20%
  1 Downloads (Pure)

• Pulsed laser deposition of lysozyme: the dependence on shot numbers and the angular distribution

  Constantinescu, C., Matei, A., Schou, J., Canulescu, S. & Dinescu, M., 2013, In: Applied Physics B. 113, 3, p. 367-371

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Lysozyme 100%
  • Laser Ablation 33%
  • Angular Distribution 33%
  • Hydrodynamic Model 33%
  • Deposition 33%
• 2012

  A study on matrix assisted pulsed evaporation (MAPLE) of organic materials

  Matei, A., Canulescu, S., Constantinescu, C., Schou, J. & Dinescu, M., 2012, In: A I P Conference Proceedings Series. 1464, 1, p. 256-264

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Chlormethine 100%
  • Protein 50%
  • Pulse Rate 50%

• In vitro studies of PEG thin films with different molecular weights deposited by MAPLE

  Paun, I. A., Ion, V., Luculescu, C-R., Dinescu, M., Canulescu, S. & Schou, J., 2012, In: Applied Physics A: Materials Science & Processing. 109, 1, p. 223-232

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Poly(ethylene Glycol) 100%
  • Liquid Film 100%
  • Molecular Mass 50%
  • Evaporation 20%
  • Refractive Index 20%
• 2011

  Growth and thermoelectric properties of FeSb2 films produced by pulsed laser deposition

  Sun, Y., Canulescu, S., Sun, P., Steglich, F., Pryds, N. & Brummerstedt Iversen, B., 2011, In: Applied Physics A: Materials Science & Processing. 104, 3, p. 883-887

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Liquid Film 100%
  • Liquid Films 100%
  • Pulsed Laser Deposition 60%
  • Thermoelectricity 60%
  • Pressure 40%

• Nanosecond and femtosecond ablation of La0.6Ca0.4CoO3: a comparison between plume dynamics and composition of the films

  Canulescu, S., Papadopoulou, E., Anglos, D., Lippert, T., Montenegro, M. J., Georgiou, S., Döbeli, M. & Wokaun, A., 2011, In: Applied Physics A: Materials Science & Processing. 105, 1, p. 167-176

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Plum 100%
  • Ablation 83%
  • Pulses 83%
  • Liquid Film 83%
  • Pulse Rate 83%

• Processing of C60 thin films by Matrix-Assisted Pulsed Laser Evaporation (MAPLE)

  Canulescu, S., Schou, J. & Fæster, S., 2011, In: Applied Physics A: Materials Science & Processing. 104, 3, p. 775-780

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Coupling Constant 100%
  • Pulsed Laser 75%
  • Thin Films 75%
  • Evaporation 75%
  • Matrix 75%

• Pulsed laser deposition growth of FeSb2 films for thermoelectric applications

  Sun, Y., Canulescu, S., Sun, P., Steglich, F., Pryds, N., Schou, J. & Brummerstedt Iversen, B., 2011, In: Materials Chemistry and Physics. 129, 1-2, p. 105-108

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Liquid Films 100%
  • Thermoelectrics 50%
  • Pulsed Laser Deposition 33%
  • Temperature 33%
• 2010

  Detection of negative ions in glow discharge mass spectrometry for analysis of solid specimens

  Canulescu, S., Molchan, I. S., Tauziede, C., Tempez, A., Whitby, J. A., Thompson, G. E., Skeldon, P., Chapon, P. & Michler, J., 2010, In: Analytical and Bioanalytical Chemistry. 396, 8, p. 2871-2879

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Anion 100%
  • Glow Discharge 80%
  • Time of Flight Mass Spectroscopy 40%
  • Analytical Method 40%
  • Detection 40%
  615 Downloads (Pure)