• Produktionstorvet, 427, 314

    2800 Kgs. Lyngby

    Denmark

20172020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference abstract in proceedings
2019

A method for identification and quantification of thermal lensing in powder bed fusion

Andersen, S. A., Valente, E. H., Nadimpalli, V. K., Hansen, H. N. & Pedersen, D. B., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 230-233

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
40 Downloads (Pure)

Considerations for interpreting in-situ photodiode sensor data in pulsed mode laser powder bed fusion

Karthik Nadipalli, V., Andersen, S. A., Nielsen, J. S. & Pedersen, D. B., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 66-69

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
57 Downloads (Pure)

Impact of post-processing stages on vat-photopolymerized specimens

M. Ribo, M., Danielak, A. H., Andersen, S. A., Üstünyagiz, E., Islam, A. & Pedersen, D. B., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 155 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
43 Downloads (Pure)

Influence of atmosphere on microstructure and nitrogen content in AISI 316L fabricated by laser‐based powder bed fusion

Valente, E. H., Nadimpalli, V. K., Andersen, S. A., Pedersen, D. B., Christiansen, T. L. & Somers, M. A. J., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 244-247

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
62 Downloads (Pure)
2018

A 5D DoF Parallel Kinematic Controler For Big Area Additive Manufacturing

Jensen, M. L., K. Kiewning, M., Spangenberg, J., Andersen, S. B., Pedersen, D. B. & Hansen, H. N., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, p. 167-171

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

A Beam Modulator and Galvanometer Controller for Metal Powder Bed Fusion

Andersen, S. A., Del Rio, S., Pedersen, D. B. & Hansen, H. N., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, p. 172-177

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

1 Downloads (Pure)