• Produktionstorvet, 425, 217

    2800 Kgs. Lyngby

    Denmark

20122021

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Article in proceedings
2019

Resistor-capacitor approach for modelling of temperature and humidity response inside electronic enclosures

Staliulionis, Z., Mohanty, S. & Hattel, J. H., 2019, 2019 20th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE 2019). IEEE, 7 p. 8724538

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Roughness Investigation of SLM Manufactured Conformal Cooling Channels Using X-ray Computed Tomography

Klingaa, C. G., Bjerre, M. K., Baier, S., De Chiffre, L., Mohanty, S. & Hattel, J. H., 2019, Proceedings of the 9th Conference on Industrial Computed Tomography, Padova, Italy (iCT 2019). 10 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
86 Downloads (Pure)
2018

Defects investigation in additively manufactured steel products for injection moulding

Moshiri, M., Tosello, G. & Mohanty, S., 2018, Euro PM2018 Proceedings . European Powder Metallurgy Association, 6 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
12 Downloads (Pure)
2017

Laser additive manufacturing of multimaterial tool inserts: a simulation-based optimization study

Mohanty, S. & Hattel, J. H., 2017, Proceedings of Laser 3D Manufacturing IV. Gu, B., Helvajian, H., Piqué, A., Dunsky, C. M. & Liu, J. (eds.). SPIE - International Society for Optical Engineering, Vol. 10095. 10 p. 100950G. (Proceedings of S P I E - International Society for Optical Engineering).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
432 Downloads (Pure)

Multi-objective optimization of cellular scanning strategy in selective laser melting

Ahrari, A., Deb, K., Mohanty, S. & Hattel, J. H., 2017, Proceedings of the 2017 IEEE Congress on Evolutionary Computation. IEEE, p. 2730-2737 8 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2016

Analysis of moisture transport between connected enclosures under a forced thermal gradient

Staliulionis, Z., Joshy, S., Ambat, R., Jabbaribehnam, M., Mohanty, S. & Hattel, J. H., 2016, Proceedings of the 18th Electronics Packaging and Technology Conference (EPTC) . IEEE, p. 320-324

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Improving accuracy of overhanging structures for selective laser melting through reliability characterization of single track formation on thick powder beds

Mohanty, S. & Hattel, J. H., 2016, Proceedings of SPIE. Gu, B., Helvajian, H. & Piqué, A. (eds.). SPIE - International Society for Optical Engineering, Vol. 9738. 14 p. 97381B. (S P I E - International Society for Optical Engineering. Proceedings, Vol. 9738 ).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
435 Downloads (Pure)

Optimization of electronic enclosure design for thermal and moisture management using calibrated models of progressive complexity

Mohanty, S., Staliulionis, Z., Shojaee Nasirabadi, P., Ambat, R. & Hattel, J. H., 2016, Proceedings of the 18th Electronics Packaging and Technology Conference (EPTC) . IEEE, p. 483-487

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Reducing residual stresses and deformations in selective laser melting through multi-level multi-scale optimization of cellular scanning strategy

Mohanty, S. & Hattel, J. H., 2016, Proceedings of SPIE. Gu, B., Helvajian, H. & Piqué, A. (eds.). SPIE - International Society for Optical Engineering, Vol. 9738. 12 p. 97380Z. (S P I E - International Society for Optical Engineering. Proceedings; No. 97380Z, Vol. 9738 ).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
527 Downloads (Pure)

Semi-empirical prediction of moisture build-up in an electronic enclosure using analysis of variance (ANOVA)

Shojaee Nasirabadi, P., Conseil, H., Mohanty, S., Jabbaribehnam, M., Ambat, R. & Hattel, J. H., 2016, Proceedings of the 18th Electronics Packaging and Technology Conference (EPTC) . IEEE, p. 785-790 6 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

1 Downloads (Pure)
2015

Cellular scanning strategy for selective laser melting: Generating reliable, optimized scanning paths and processing parameters

Mohanty, S. & Hattel, J. H., 2015, Proceedings of SPIE: Laser 3D Manufacturing II. Helvajian, H., Piqué, A., Wegener, M. & Gu, B. (eds.). SPIE - International Society for Optical Engineering, Vol. 9353. 13 p. 93530U. (Proceedings of SPIE, the International Society for Optical Engineering, Vol. 9353).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
290 Downloads (Pure)
2014

Effect of Uncertainty in Processing Parameters on the Microstructure of Single Melt Tracks Formed by Selective Laser Melting

Mohanty, S. & Hattel, J., 2014, International Congress on Applications of Lasers & Electro-Optics 2014 Congress Proceedings. Vol. 1802.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2013

A finite volume alternate direction implicit approach to modeling selective laser melting

Hattel, J. H. & Mohanty, S., 2013, ICALEO 2013 - 32nd International Congress on Applications of Lasers and Electro-Optics. p. 91-98 8 p. (ICALEO 2013 - 32nd International Congress on Applications of Lasers and Electro-Optics).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review