• 228, S18

    Denmark

19992020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Journal article
2020

Analysis of the correlation between micro-mechanical fields and fatigue crack propagation path in nodular cast iron

Andriollo, T., Zhang, Y., Fæster, S. & Kouznetsova, V., 2020, In : Acta Materialia. 188, p. 302-314

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
77 Downloads (Pure)

Micromechanisms of leading edge erosion of wind turbine blades: X‐ray tomography analysis and computational studies

Mishnaevsky, L., Fæster, S., Mikkelsen, L. P., Kusano, Y. & Bech, J. I., 2020, In : Wind Energy. 23, 3, p. 547-562 16 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Plasma surface modification of glass fibre sizing for manufacturing polymer composites

Kusano, Y., Hottentot Cederløf, D. J. & Fæster, S., 2020, In : Key Engineering Materials. 843, p. 159-164 6 p.

Research output: Contribution to journalJournal articleResearchpeer-review

2019

2D and 3D characterization of rolling contact fatigue cracks in manganese steel wing rails from a crossing

Dhar, S., Danielsen, H. K., Fæster, S., Rasmussen, C. J. & Juul Jensen, D., 2019, In : Wear. 436-437, 202959.

Research output: Contribution to journalJournal articleResearchpeer-review

3D X-ray computerized tomography of White Etching Cracks (WEC)

Danielsen, H. K., Carrasco, A. J., Fæster, S., Dahl, K. V., Guzmán, F. G., Sauvage, P. & Jacobs, G., 2019, In : Materials Characterization. 150, p. 78-87

Research output: Contribution to journalJournal articleResearchpeer-review

Crack formation within a Hadfield manganese steel crossing nose

Dhar, S., Danielsen, H. K., Fæster, S., Rasmussen, C., Zhang, Y. & Juul Jensen, D., 2019, In : Wear. 438, 9 p., 203049.

Research output: Contribution to journalJournal articleResearchpeer-review

1 Downloads (Pure)

Influence of in-plane shear on kink-plane orientation in a unidirectional fibre composite

Wilhelmsson, D., Mikkelsen, L. P., Fæster, S. & Asp, L. E., 2019, In : Composites Part A: Applied Science and Manufacturing. 119, p. 283-290 8 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
49 Downloads (Pure)

Microstructure and residual elastic strain at graphite nodules in ductile cast iron analyzed by synchrotron X-ray microdiffraction

Zhang, Y. B., Andriollo, T., Fæster, S., Barabash, R., Xu, R., Tiedje, N., Thorborg, J., Hattel, J., Juul Jensen, D. & Hansen, N., 2019, In : Acta Materialia. 167, p. 221-230

Research output: Contribution to journalJournal articleResearchpeer-review

X-ray tomography data of compression tested unidirectional fibre composites with different off-axis angles

Wilhelmsson, D., Mikkelsen, L. P., Fæster, S. & Asp, L. E., 2019, In : Data in Brief. 25, 8 p., 104263.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
170 Downloads (Pure)

X-ray tomography data of White Etching Cracks (WEC)

Fæster, S. & Danielsen, H. K., 2019, In : Data in Brief. 27, 5 p., 104531.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
97 Downloads (Pure)
2018

Probing the structure and mechanical properties of the graphite nodules in ductile cast irons via nano-indentation

Andriollo, T., Fæster, S. & Winther, G., 2018, In : Mechanics of Materials. 122, p. 85-95

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
26 Downloads (Pure)
2017

Analysis of bearing steel exposed to rolling contact fatigue

Hansen, K. T., Fæster, S., Natarajan, A., Mishin, O., Danielsen, H. K., Juul Jensen, D. & Klit, P., 2017, In : I O P Conference Series: Materials Science and Engineering. 219, 8 p., 012024.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
405 Downloads (Pure)

Characterization of voids in shock-loaded Al single crystal by combining X-ray tomography and electron microscopy

Hong, C., Fæster, S., Hansen, N., Huang, X. & Barabash, R. I., 2017, In : I O P Conference Series: Materials Science and Engineering. 219, 8 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
353 Downloads (Pure)

Fatigue Reliability Analysis of Wind Turbine Cast Components

Rafsanjani, H. M., Sørensen, J. D., Fæster, S. & Sturlason, A., 2017, In : Energies. 10, 4, 14 p., 466.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
323 Downloads (Pure)

Graphite nodules in fatigue-tested cast iron characterized in 2D and 3D

Mukherjee, K., Fæster, S., Hansen, N., Dahl, A. B., Gundlach, C., Frandsen, J. O. & Sturlason, A., 2017, In : Materials Characterization. 129, p. 169-178

Research output: Contribution to journalJournal articleResearchpeer-review

Multiscale characterization of White Etching Cracks (WEC) in a 100Cr6 bearing from a thrust bearing test rig

Danielsen, H. K., Guzmán, F. G., Dahl, K. V., Li, Y. J., Wu, J., Jacobs, G., Burghardt, G., Fæster, S., Alimadadi, H., Goto, S., Raabe, D. & Petrov, R., 2017, In : Wear. 370-371, p. 73-82

Research output: Contribution to journalJournal articleResearchpeer-review

Non-spherical voids and lattice reorientation patterning in a shock-loaded Al single crystal

Hong, C., Fæster, S., Hansen, N., Huang, X. & Barabash, R. I., 2017, In : Acta Materialia. 134, p. 16-30 15 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Surface crack formation on rails at grinding induced martensite white etching layers

Rasmussen, C. J., Fæster, S., Dhar, S., Quaade, J. V., Bini, M. & Danielsen, H. K., 2017, In : Wear. 384-385, p. 8-14 7 p.

Research output: Contribution to journalJournal articleResearchpeer-review

2016

3D characterization of rolling contact fatigue crack networks

Jessop, C., Ahlström, J., Hammar, L., Fæster, S. & Danielsen, H. K., 2016, In : Wear. 366-367, p. 392–400 9 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
306 Downloads (Pure)

Three-dimensional local residual stress and orientation gradients near graphite nodules in ductile cast iron

Zhang, Y., Andriollo, T., Fæster, S., Liu, W., Hattel, J. H. & Barabash, R. I., 2016, In : Acta Materialia. 121, p. 173-180

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
200 Downloads (Pure)
2013

Characterization of Residual Particulates from Biomass Entrained Flow Gasification

Qin, K., Lin, W., Fæster, S., Jensen, P. A., Wu, H. & Jensen, A. D., 2013, In : Energy & Fuels. 27, 1, p. 262-270

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
393 Downloads (Pure)
2011

High temperature proton exchange membranes based on polybenzimidazole and clay composites for fuel cells

Plackett, D., Siu, A., Li, Q., Pan, C., Jensen, J. O., Fæster Nielsen, S., Permyakova, A. A. & Bjerrum, N., 2011, In : Journal of Membrane Science. 383, 1-2, p. 78-87

Research output: Contribution to journalJournal articleResearchpeer-review

Processing of C60 thin films by Matrix-Assisted Pulsed Laser Evaporation (MAPLE)

Canulescu, S., Schou, J. & Fæster, S., 2011, In : Applied Physics A: Materials Science & Processing. 104, 3, p. 775-780

Research output: Contribution to journalJournal articleResearchpeer-review

2008

A general methodology for full-field plastic strain measurements using X-ray absorption tomography and internal markers

Haldrup, M. K., Nielsen, S. F. & Wert, J. A., 2008, In : Experimental Mechanics. 48, 2, p. 199-211

Research output: Contribution to journalJournal articleResearchpeer-review

Experimental determination of strain partitioning among individual grains in the bulk of an aluminium multicrystal

Haldrup, M. K., Beckmann, F., Nielsen, S. F. & Wert, J. A., 2008, In : Materials Characterization. 59, 7, p. 842-851

Research output: Contribution to journalJournal articleResearchpeer-review

2006

Inhomogeneous plastic flow investigated by X-ray absorption microtomography of an aluminium alloy containing marker particles

Haldrup, K., Fæster Nielsen, S., Beckmann, F. & Wert, J. A., 2006, In : Journal of Microscopy. 222, p. 28-35

Research output: Contribution to journalJournal articleResearchpeer-review

Non-destructive characterization of recrystallization kinetics using three-dimensional X-ray diffraction microscopy

Lauridsen, E. M., Schmidt, S., Fæster Nielsen, S., Margulies, L., Poulsen, H. F. & Juul Jensen, D., 2006, In : Scripta Materialia. 55, 1, p. 51-56

Research output: Contribution to journalJournal articleResearchpeer-review

2005

Plastic strain measurements: From 2D to 3D

Haldrup, K., Fæster Nielsen, S., Beckmann, F. & Wert, J. A., 2005, In : Materials Science and Technology. 21, p. 1428-1431

Research output: Contribution to journalJournal articleResearchpeer-review

2004

An algebraic algorithm for generation of three-dimensional grain maps based on diffraction with a wide beam of hard X-rays

Markussen, T., Fu, X. W., Margulies, L., Lauridsen, E. M., Fæster Nielsen, S., Schmidt, S. & Poulsen, H. F., 2004, In : Journal of Applied Crystallography. 37, p. 96-102

Research output: Contribution to journalJournal articleResearchpeer-review

Investigating the effect of grain interaction during plastic deformation of copper

Lienert, U., Han, T-S., Almer, J., Dawson, P. R., Leffers, T., Margulies, L., Fæster Nielsen, S., Poulsen, H. F. & Schmidt, S., 2004, In : Acta Mater.. 52, p. 4461-4467

Research output: Contribution to journalJournal articleResearchpeer-review

Watching the growth of bulk grains during recrystallization of deformed metals

Schmidt, S., Fæster Nielsen, S., Gundlach, C., Margulies, L., Huang, X. & Juul Jensen, D., 2004, In : Science. 305, 5681, p. 229-232

Research output: Contribution to journalJournal articleResearchpeer-review

2003

Growth kinetics of individual grains during recrystallization with an intermediate cooling cycle

Fæster Nielsen, S., Schmidt, S., Lauridsen, E. M., Yiu, H., Savoie, J., Zeng, M. & Juul Jensen, D., 2003, In : Scripta Materialia. 48, p. 513-518

Research output: Contribution to journalJournal articleResearchpeer-review

Measurements of plastic displacement gradient components in three dimensions using marker particles and synchrotron X-ray absorption microtomography

Fæster Nielsen, S., Poulsen, H. F., Beckmann, F., Thorning, C. & Wert, J. A., 2003, In : Acta Mater.. 51, p. 2407-2415

Research output: Contribution to journalJournal articleResearchpeer-review

Non-destructive mapping of grains in three dimensions

Fu, X., Poulsen, H. F., Schmidt, S., Fæster Nielsen, S., Lauridsen, E. M. & Juul Jensen, D., 2003, In : Scripta Materialia. 49, p. 1093-1096

Research output: Contribution to journalJournal articleResearchpeer-review

Recrystallization kinetics of individual bulk grains in 90 % cold-rolled aluminium

Lauridsen, E. M., Poulsen, H. F., Fæster, S. & Juul Jensen, D., 2003, In : Acta Mater.. 51, p. 4423-4435

Research output: Contribution to journalJournal articleResearchpeer-review

The three-dimensional X-ray diffraction microscope: 3D maps of grains and grain dynamics in polycrystalline materials

Lauridsen, E. M., Fæster Nielsen, S., Margulies, L., Schmidt, S., Poulsen, H. F. & Juul Jensen, D., 2003, In : Journal de physique iv. 104, p. 495-498

Research output: Contribution to journalJournal articleResearchpeer-review

2001

Three-dimensional maps of grain boundaries and the stress state of individual grains in polycrystals and powders

Poulsen, H. F., Fæster Nielsen, S., Lauridsen, E. M., Schmidt, S., Suter, R. M., Lienert, U., Margulies, L., Lorentzen, T. & Juul Jensen, D., 2001, In : Journal of Applied Crystallography. 34, p. 751-756

Research output: Contribution to journalJournal articleResearchpeer-review

2000

A conical slit for three-dimensional XRD mapping

Fæster Nielsen, S., Wolf, A., Poulsen, H. F., Ohler, M., Lienert, U. & Owen, R. A., 2000, In : Journal of Synchrotron Radiation. 7, p. 103-109

Research output: Contribution to journalJournal articleResearchpeer-review