• 228, S18

    Denmark

19992020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2020

Analysis of the correlation between micro-mechanical fields and fatigue crack propagation path in nodular cast iron

Andriollo, T., Zhang, Y., Fæster, S. & Kouznetsova, V., 2020, In : Acta Materialia. 188, p. 302-314

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
77 Downloads (Pure)

Micromechanisms of leading edge erosion of wind turbine blades: X‐ray tomography analysis and computational studies

Mishnaevsky, L., Fæster, S., Mikkelsen, L. P., Kusano, Y. & Bech, J. I., 2020, In : Wind Energy. 23, 3, p. 547-562 16 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Plasma surface modification of glass fibre sizing for manufacturing polymer composites

Kusano, Y., Hottentot Cederløf, D. J. & Fæster, S., 2020, In : Key Engineering Materials. 843, p. 159-164 6 p.

Research output: Contribution to journalJournal articleResearchpeer-review

11 Downloads (Pure)
2019

2D and 3D characterization of rolling contact fatigue cracks in manganese steel wing rails from a crossing

Dhar, S., Danielsen, H. K., Fæster, S., Rasmussen, C. J. & Juul Jensen, D., 2019, In : Wear. 436-437, 202959.

Research output: Contribution to journalJournal articleResearchpeer-review

3D X-ray computerized tomography of White Etching Cracks (WEC)

Danielsen, H. K., Carrasco, A. J., Fæster, S., Dahl, K. V., Guzmán, F. G., Sauvage, P. & Jacobs, G., 2019, In : Materials Characterization. 150, p. 78-87

Research output: Contribution to journalJournal articleResearchpeer-review

Crack formation within a Hadfield manganese steel crossing nose

Dhar, S., Danielsen, H. K., Fæster, S., Rasmussen, C., Zhang, Y. & Juul Jensen, D., 2019, In : Wear. 438, 9 p., 203049.

Research output: Contribution to journalJournal articleResearchpeer-review

1 Downloads (Pure)

Influence of in-plane shear on kink-plane orientation in a unidirectional fibre composite

Wilhelmsson, D., Mikkelsen, L. P., Fæster, S. & Asp, L. E., 2019, In : Composites Part A: Applied Science and Manufacturing. 119, p. 283-290 8 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
49 Downloads (Pure)

Microstructure and residual elastic strain at graphite nodules in ductile cast iron analyzed by synchrotron X-ray microdiffraction

Zhang, Y. B., Andriollo, T., Fæster, S., Barabash, R., Xu, R., Tiedje, N., Thorborg, J., Hattel, J., Juul Jensen, D. & Hansen, N., 2019, In : Acta Materialia. 167, p. 221-230

Research output: Contribution to journalJournal articleResearchpeer-review

Solution to minimize leading edge erosion on turbine blades

Bech, J. I., Bak, C., Vejen, F., Madsen, M. B., Bayar, M., Skrzypinski, W. R., Kusano, Y., Halling, K. M., Saldern, M., Tilg, A-M., Fæster, S. & Johansen, N. F-J., 2019. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
34 Downloads (Pure)

X-ray tomography data of compression tested unidirectional fibre composites with different off-axis angles

Wilhelmsson, D., Mikkelsen, L. P., Fæster, S. & Asp, L. E., 2019, In : Data in Brief. 25, 8 p., 104263.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
170 Downloads (Pure)

X-ray tomography data of White Etching Cracks (WEC)

Fæster, S. & Danielsen, H. K., 2019, In : Data in Brief. 27, 5 p., 104531.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
97 Downloads (Pure)
2018

2D and 3D characterization of rolling contact fatigue cracks in a manganese steel crossing wing rail

Dhar, S., Danielsen, H. K., Fæster, S., Rasmussen, C. J. & Juul Jensen, D., 2018, 11th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, CM 2018 . TU Delft, p. 196-202

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Characterization report of selected RET and SPIFT samples characterized by electron microscopy and X-ray tomography

Fæster, S., Kusano, Y. & Bech, J. I., 2018, DTU Wind Energy. 20 p. (DTU Wind Energy I; No. 763).

Research output: Book/ReportReportResearchpeer-review

Leading edge erosion of wind turbine blades

Hasager, C. B., Bech, J. I., Kusano, Y., Sjöholm, M., Mikkelsen, T. K., Bak, C., Skrzypinski, W. R., Fæster, S., Tilg, A-M., Vejen, F., Madsen, M. B., Bayar, M., Pedersen, M. S. & Halling, K. M., 2018

Research output: Non-textual formSound/Visual production (digital)Research

Open Access
File
674 Downloads (Pure)

Preface for the 39th Risø Symposium Proceedings, IOP publication

Fæster, S., Goutianos, S., Lilholt, H., Madsen, B., Mikkelsen, L. P., Sørensen, B. F. & Toftegaard, H. L., 2018, Proceedings of the 39th Risø International Symposium on Materials Science: Fatigue of Composite Materials: Microstructure, Mechanics and Methods. 1 p. (I O P Conference Series: Materials Science and Engineering; No. 1, Vol. 388).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsCommunication

Open Access
File
126 Downloads (Pure)

Probing the structure and mechanical properties of the graphite nodules in ductile cast irons via nano-indentation

Andriollo, T., Fæster, S. & Winther, G., 2018, In : Mechanics of Materials. 122, p. 85-95

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
26 Downloads (Pure)

Proceedings of the 39th Risø International Symposium

Fæster, S. (ed.), Goutianos, S. (ed.), Lilholt, H. (ed.), Madsen, B. (ed.), Mikkelsen, L. P. (ed.), Sørensen, B. F. (ed.) & Toftegaard, H. L. (ed.), 2018, 1 p. (I O P Conference Series: Materials Science and Engineering; No. 1, Vol. 388).

Research output: Book/ReportBookResearchpeer-review

Rain and erosion on turbine blades

Hasager, C. B., Bech, J. I., Kusano, Y., Sjöholm, M., Mikkelsen, T. K., Bak, C., Skrzypinski, W. R., Fæster, S., Tilg, A-M., Vejen, F., Madsen, M. B., Bayar, M., Saldern, M. & Halling, K. M., 2018

Research output: Non-textual formSound/Visual production (digital)Communication

Open Access
File
151 Downloads (Pure)

Rain erosion of leading edges of wind turbine blades. What is up and down?

Hasager, C. B., Bech, J. I., Bak, C., Kusano, Y., Skrzypinski, W. R., Fæster, S., Tilg, A-M., Vejen, F., Madsen, M. B., Bayar, M., Saldern, M. & Halling, K. M., 2018

Research output: Non-textual formSound/Visual production (digital)Researchpeer-review

Open Access
File
172 Downloads (Pure)

Use of high intensity X-ray analysis as tool to create new, fundamental models for phase transformations and residual stress in ductile cast iron

Tiedje, N. S., Bjerre, M. K., Andriollo, T., Azeem, M., Zhang, Y., Fæster, S., Lee, P. D. & Hattel, J. H., 2018, 73rd World Foundry Congress (WFC 2018) Creative Foundry: Proceedings of a meeting held 23-27 September 2018, Krakow, Poland. Young Researchers' Seminar . World Foundry Organization, p. 239-240

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

6 Downloads (Pure)
2017

Analysis of bearing steel exposed to rolling contact fatigue

Hansen, K. T., Fæster, S., Natarajan, A., Mishin, O., Danielsen, H. K., Juul Jensen, D. & Klit, P., 2017, In : I O P Conference Series: Materials Science and Engineering. 219, 8 p., 012024.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
405 Downloads (Pure)

Characterization of voids in shock-loaded Al single crystal by combining X-ray tomography and electron microscopy

Hong, C., Fæster, S., Hansen, N., Huang, X. & Barabash, R. I., 2017, In : I O P Conference Series: Materials Science and Engineering. 219, 8 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
353 Downloads (Pure)

Fatigue Reliability Analysis of Wind Turbine Cast Components

Rafsanjani, H. M., Sørensen, J. D., Fæster, S. & Sturlason, A., 2017, In : Energies. 10, 4, 14 p., 466.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
326 Downloads (Pure)

Graphite nodules in fatigue-tested cast iron characterized in 2D and 3D

Mukherjee, K., Fæster, S., Hansen, N., Dahl, A. B., Gundlach, C., Frandsen, J. O. & Sturlason, A., 2017, In : Materials Characterization. 129, p. 169-178

Research output: Contribution to journalJournal articleResearchpeer-review

Multiscale characterization of White Etching Cracks (WEC) in a 100Cr6 bearing from a thrust bearing test rig

Danielsen, H. K., Guzmán, F. G., Dahl, K. V., Li, Y. J., Wu, J., Jacobs, G., Burghardt, G., Fæster, S., Alimadadi, H., Goto, S., Raabe, D. & Petrov, R., 2017, In : Wear. 370-371, p. 73-82

Research output: Contribution to journalJournal articleResearchpeer-review

Non-spherical voids and lattice reorientation patterning in a shock-loaded Al single crystal

Hong, C., Fæster, S., Hansen, N., Huang, X. & Barabash, R. I., 2017, In : Acta Materialia. 134, p. 16-30 15 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Surface crack formation on rails at grinding induced martensite white etching layers

Rasmussen, C. J., Fæster, S., Dhar, S., Quaade, J. V., Bini, M. & Danielsen, H. K., 2017, In : Wear. 384-385, p. 8-14 7 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Synchrotron measurements of local microstructure and residual strains in ductile cast iron

Zhang, Y., Andriollo, T., Fæster, S., Liu, W., Sturlason, A. & Barabash, R., 2017, In : I O P Conference Series: Materials Science and Engineering. 219, 7 p., 012054 .

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
254 Downloads (Pure)
2016

3D characterization of rolling contact fatigue crack networks

Jessop, C., Ahlström, J., Hammar, L., Fæster, S. & Danielsen, H. K., 2016, In : Wear. 366-367, p. 392–400 9 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
306 Downloads (Pure)

Three-dimensional local residual stress and orientation gradients near graphite nodules in ductile cast iron

Zhang, Y., Andriollo, T., Fæster, S., Liu, W., Hattel, J. H. & Barabash, R. I., 2016, In : Acta Materialia. 121, p. 173-180

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
201 Downloads (Pure)
2014

Characterization of graphite nodules in thick-walled ductile cast iron

Mukherjee, K., Fæster, S., Dahl, A. B. & Sturlason, A., 2014, In : Proceedings of the Risø International Symposium on Materials Science. 35, p. 405-410

Research output: Contribution to journalConference articleResearchpeer-review

Fatigue damage of steel components

Fæster, S., Zhang, X., Huang, X. & Juul Jensen, D., 2014, Department of Wind Energy Annual Report 2013. Larsen, B. C., Hansen, J. C. & Cronin, T. (eds.). DTU Wind Energy, p. 19 1 p.

Research output: Chapter in Book/Report/Conference proceedingReport chapterCommunication

Open Access
File
557 Downloads (Pure)

Grinding induced martensite on the surface of rails

Rasmussen, C. J., Zhang, X., Danielsen, H. K. & Fæster, S., 2014, In : Proceedings of the Risø International Symposium on Materials Science. 35, p. 439-446

Research output: Contribution to journalConference articleResearchpeer-review

File
400 Downloads (Pure)

New Frontiers of Nanometals. Proceedings of the 35th Risø International Symposium on Materials Science

Fæster, S. (ed.), Hansen, N. (ed.), Juul Jensen, D. (ed.), Ralph, B. (ed.) & Sun, J. (ed.), 2014, Department of Wind Energy, Technical University of Denmark. 550 p. (Proceedings of the Risø International Symposium on Materials Science; No. 35).

Research output: Book/ReportBookResearchpeer-review

1 Downloads (Pure)

Statistical analysis of manufacturing defects on fatigue life of wind turbine casted Component

Rafsanjani, H. M., Sørensen, J. D., Mukherjee, K., Fæster, S. & Sturlason, A., 2014, Proceedings of International Conference on Safety & Reliability of Ships, Offshore & Subsea Structures 2014. ASRANet Ltd., 6 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2013

Advanced materials characterization and modeling using synchrotron, neutron, TEM, and novel micro-mechanical techniques - A European effort to accelerate fusion materials development

Linsmeier, C., Fu, C-C., Kaprolat, A., Fæster, S., Mergia, K., Schäublin, R., Lindau, R., Bolt, H., Buffière, J-Y., Caturla, M. J., Décamps, B., Ferrero, C., Greuner, H., Hébert, C., Höschen, T., Hofmann, M., Hugenschmidt, C., Jourdan, T., Köppen, M., Płocinski, T. & 8 others, Riesch, J., Scheel, M., Schillinger, B., Vollmer, A., Weitkamp, T., Yao, W., You, J-H. & Zivelonghi, A., 2013, In : Journal of Nuclear Materials. 442, p. S834–S845

Research output: Contribution to journalConference articleResearchpeer-review

Characterization of Residual Particulates from Biomass Entrained Flow Gasification

Qin, K., Lin, W., Fæster, S., Jensen, P. A., Wu, H. & Jensen, A. D., 2013, In : Energy & Fuels. 27, 1, p. 262-270

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
394 Downloads (Pure)

Processing of fibre composites – challenges for maximum materials performance

Madsen, B. (ed.), Lilholt, H. (ed.), Kusano, Y., Fæster, S. & Ralph, B., 2013, DTU Wind Energy. 410 p. (Proceedings of the Risø International Symposium on Materials Science; No. 34).

Research output: Book/ReportBookResearchpeer-review

Thin films of C60 produced by matrix-assisted pulsed laser evaporation (MAPLE)

Canulescu, S., Schou, J., Fæster, S., Hansen, K. V., Conseil, H. & Ambat, R., 2013. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File
227 Downloads (Pure)
2012

Growth of thin carbon-based films by laser assisted methods

Canulescu, S., Schou, J. & Fæster, S., 2012, Carbonhagen 2012: 3rd Symposium on graphene and carbon nanotubes. p. 38

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
216 Downloads (Pure)

Nanometals - Status and Perspective: Proceedings of the 33rd Risø International Symposium on Materials Science

Fæster, S. (ed.), Hansen, N. (ed.), Huang, X. (ed.), Juul Jensen, D. (ed.) & Ralph, B. (ed.), 2012, Roskilde: DTU Wind Energy. 436 p. (Proceedings of the Risø International Symposium on Materials Science; No. 33).

Research output: Book/ReportBookResearchpeer-review

2011

Composite materials for structural performance: towards higher limits. Proceedings of the 32nd Risø International Symposium on Materials Science

Fæster, S., Juul Jensen, D., Ralph, B. & Sørensen, B. F., 2011, Roskilde: Danmarks Tekniske Universitet, Risø Nationallaboratoriet for Bæredygtig Energi. 510 p. (Proceedings of the Risø International Symposium on Materials Science, Vol. 32).

Research output: Book/ReportBookResearchpeer-review

Growth of thin fullerene films by matrix assisted pulsed laser evaporation

Canulescu, S., Schou, J. & Fæster, S., 2011.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File
184 Downloads (Pure)

Growth of thin fullerene films by Matrix Assisted Pulsed Laser Evaporation

Canulescu, S., Schou, J. & Fæster, S., 2011.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File
134 Downloads (Pure)

High temperature proton exchange membranes based on polybenzimidazole and clay composites for fuel cells

Plackett, D., Siu, A., Li, Q., Pan, C., Jensen, J. O., Fæster Nielsen, S., Permyakova, A. A. & Bjerrum, N., 2011, In : Journal of Membrane Science. 383, 1-2, p. 78-87

Research output: Contribution to journalJournal articleResearchpeer-review