Peder Klit

2016

Investigation of Different Piston Ring Curvatures on Lubricant Transport along Cylinder Liner in Large Two-Stroke Marine Diesel Engines

Overgaard, H. C., Klit, P. & Vølund, A., 2016, Proceedings of The 17th Nordic Symposium on Tribology.. 9 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

2 Downloads (Pure)

2014

Application of finite elements and computational fluid dynamics to predict and improve the filling ratio in journal bearings under dynamic loading

Christiansen, C. K., Klit, P., Walther, J. H. & Vølund, A., 2014, Proceedings of NSCM-27: the 27th Nordic Seminar on Computational Mechanics. Eriksson, A., Kulachenko, A., Mihaescu, M. & Tibert, G. (eds.). 4 p. (TRITA-MEK Technical report; No. 2014:24).

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

2013

Testing of Bearing Materials for Large Two-stroke Marine Diesel Engines

Klit, P., Persson, S. & Vølund, A., 2013, 12th EDF - Pprime Workshop: “Solutions for performance improvement and friction reduction of journal and thrust bearings”. 13 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

File

3146 Downloads (Pure)

2010

Application of a new wear model in hydrodynamic metal-polymer bearings

Thomsen, K. (Invited author) & Klit, P. (Invited author), 2010, 9. EDF/Pprime (LMS) Poitiers Workshop: “Improvement of Bearing Performance and Evaluation of Adverse Conditions”.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

1 Downloads (Pure)

2009

COMPARISON AND CLASSIFICATION OF DESIGN BUILD PROJECTS IN DIFFERENT ENGINEERING BACHELOR PROGRAMS

Vigild, M. E., Willumsen, L. E., Borchersen, E., Clement, K., Bjerregaard Jensen, L., Kjærgaard, C., Klit, P. & Sparsø, J., 2009, COMPARISON AND CLASSIFICATION OF DESIGN BUILD PROJECTS IN DIFFERENT ENGINEERING BACHELOR PROGRAMS. Singapore: Proceedings of the 5th International CDIO Conference, Singapore Polytechnic, Singapore, June 7 - 10, 2009, p. 1-7

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Development and verification of a reciprocating test rig designed for investigation of piston ring tribology

Pedersen, M. T., Imran, T. & Klit, P., 2009, Development and verification of a reciprocating test rig designed for investigation of piston ring tribology.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research

Novel Tribotester for Cylinder Liner/Piston Ring Contacts of Two Stroke Marine Diesel Engines

Pedersen, M. T., Imran, T., Klit, P., Felter, C. & Vølund, A., 2009, BALTTRIB' 2009: V INTERNATIONAL CONFERENCE, PROCEEDINGS. LITHUANIAN UNIV AGRICULTURE, p. 131-139

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research

Ranking of Cylinder Liner Materials in Two Stroke Marine Diesel Engines

Pedersen, M. T., Imran, T., Klit, P., Felter, C. & Vølund, A., 2009, Proceedings of the International Conference BALTTRIB’2009.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research

Open Access

File

756 Downloads (Pure)

2008

Experimental Investigation of Piston Rings for Internal Combustion Engines

Klit, P. & Vølund, A., 2008, Proceedings of the International Conference NordTRIB'2008: 13. Nordic Symposium on Tribology. Tampere , Finland: Tampere University of Technology, Vol. 1.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Experimental Piston Ring Tribology for Marine Diesel Engines

Klit, P. & Vølund, A., 2008, Proceedings of the STLE/ASME International Joint Tribology Conference: IJTC2008-71160. New York: The American Society of Mechanical Engineers (ASME), 5 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

2007

Analysis of a Thrust Bearing with Flexible Pads and Flexible Supports

Klit, P. & Thomsen, K., 2007, BaltTrib'2007: International Tribology Conference. Padgurskas, J. (ed.). Kaunas, Lithuania: Lithuanian University of Agriculture, Vol. 1. p. 174-180 267 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Calculation of Oil Film Thickness from Damping Coefficients for a Piston Ring in an Internal Combustion Engine

Christiansen, J., Klit, P., Vølund, A. & Hyun-Hwang, J., 2007, BaltTrib'2007. Kaunas, Lithuania: Lithuanian University of Agriculture, p. 162-167

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Open Access

File

1519 Downloads (Pure)

Experimental Investigation of Piston Rings for Internal Combustion Engines

Christiansen, J., Klit, P., Vølund, A. & Hwang, J.-H., 2007, International Tribology Conference: BaltTrib'2007. Kaunas, Lithuania: Lithuanian University of Agriculture, Vol. 1. p. 16-21 267 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Towards CDIO-based B.Eng. studies at the Technical University of Denmatk

Sparsø, J., Klit, P., May, M., Mohr, G. & Vigild, M. E., 2007, Proceedings of the 3rd International CDIO Conference.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

2006

Design of Piston Ring Friction Tester Apparatus

Klit, P., 2006, Nordtrib 2006: The 12th Nordic Symposium on Tribology. 1 ed. Copenhagen: Technical University of Denmark, 10 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

2005

Open Access

File

780 Downloads (Pure)

2002

Shaft centre orbit for dynamically loaded radial bearings

Klit, P. & Vølund, A., 2002, The 10th Nordic Symposium on Tribology - Nordtrib 2002.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Peder Klit, Professor

Investigation of Different Piston Ring Curvatures on Lubricant Transport along Cylinder Liner in Large Two-Stroke Marine Diesel Engines

Application of finite elements and computational fluid dynamics to predict and improve the filling ratio in journal bearings under dynamic loading

Testing of Bearing Materials for Large Two-stroke Marine Diesel Engines

Application of a new wear model in hydrodynamic metal-polymer bearings

COMPARISON AND CLASSIFICATION OF DESIGN BUILD PROJECTS IN DIFFERENT ENGINEERING BACHELOR PROGRAMS

Development and verification of a reciprocating test rig designed for investigation of piston ring tribology

Novel Tribotester for Cylinder Liner/Piston Ring Contacts of Two Stroke Marine Diesel Engines

Ranking of Cylinder Liner Materials in Two Stroke Marine Diesel Engines

Experimental Investigation of Piston Rings for Internal Combustion Engines

Experimental Piston Ring Tribology for Marine Diesel Engines

Analysis of a Thrust Bearing with Flexible Pads and Flexible Supports

Calculation of Oil Film Thickness from Damping Coefficients for a Piston Ring in an Internal Combustion Engine

Experimental Investigation of Piston Rings for Internal Combustion Engines

Towards CDIO-based B.Eng. studies at the Technical University of Denmatk

Design of Piston Ring Friction Tester Apparatus

EVALUATION OF COURSE EVALUATIONS

MECHANICAL ENGINEERING CURRICULUM AT DTU AND THE APPLICATION OF CDIO IN FIRST YEAR COURSES.

Shaft Center Orbit in Dynamically Loaded Bearings

Shaft centre orbit for dynamically loaded radial bearings

Peder Klit, Professor

Research output

Search results