Pauli Pedersen

Professor emeritus, Department of Mechanical Engineering
Solid Mechanics

https://orcid.org/0000-0001-8912-8147

Phone45254270
Emailpp@mek.dtu.dk
Websitehttp://www.mek.dtu.dk

Nils Koppels Allé, 404, 133
2800 Kgs. Lyngby
Denmark

Research activity per year

If you made any changes in Pure these will be visible here soon.

16 results

Filter

2009

Bolt-Plate Contact Assemblies with Prestress and External Loads
Pedersen, N. L. & Pedersen, P., 2009, Kgs. Lyngby, Denmark. 20 p. (DCAMM reports; No. 740).
Research output: Book/Report › Report › Research › peer-review
2008

Analytical optimal designs for long and short beam structures
Pedersen, P. & Pedersen, N. L., 2008, Kgs. Lyngby: Technical University of Denmark, Danish Center for Applied Mathematics and Mechanics. 22 p. (DCAMM reports; No. 738).
Research output: Book/Report › Report › Research › peer-review
Contact analysis with non-linear elasticity and combined cone/spherical indenters
Pedersen, P., 2008, Kgs. Lyngby: Technical University of Denmark, Danish Center for Applied Mathematics and Mechanics. 20 p. (DCAMM reports; No. 736).
Research output: Book/Report › Report › Research › peer-review
2007

Design of Bolt-Plate Contact Assemblies
Pedersen, N. L. & Pedersen, P., 2007, Kgs. Lyngby: DCAMM, Technical University of Denmark. 20 p. (DCAMM reports; No. 725).
Research output: Book/Report › Report › Research › peer-review
Design of Notches and Grooves
Pedersen, N. L. & Pedersen, P., 2007, Kgs. Lyngby: DCAMM, Technical University of Denmark. 20 p. (DCAMM reports; No. 730).
Research output: Book/Report › Report › Research › peer-review
2006

On Prestress Stiffness Analysis of Bolt-Plate Contact Assemblies
Pedersen, N. L. & Pedersen, P., 2006, Kgs. Lyngby, Denmark: DCAMM, Technical University of Denmark. 20 p. (DCAMM reports; No. 719).
Research output: Book/Report › Report › Research › peer-review
2003

Analytical stiffness matrices with Green-Lagrange strain measure
Pedersen, P., 2003, report #686 ed. DCAMM, Technical University of Denmark.
Research output: Book/Report › Report › Communication
Optimal Designs - Structures and Materials - Problems and Tools
Pedersen, P., 2003
Research output: Book/Report › Report › Communication
2002
A note on Design of Fiber-nets for Maximum Stiffness
Pedersen, P., Redanz, P. & Tvergaard, V., 2002, Technical University of Denmark, Danish Center for Applied Mathematics and Mechanics. (Report No. 676).
Research output: Book/Report › Report
Design Study of Hole Positions and Hole Shapes for Crack Tip Stress Releasing
Pedersen, P., 2002, Technical University of Denmark: Technical University of Denmark, Danish Center for Applied Mathematics and Mechanics. (D C A M M Report; No. 669).
Research output: Book/Report › Report › Research
On Combined Design of Density, Orientation and Shape for Stiffness and/or Strength with Orthotropic Materials
Pedersen, P., 2002, Technical University of Denmark, Danish Center for Applied Mathematics and Mechanics. (Uden navn; No. Report No. 675).
Research output: Book/Report › Report › Research
1999

On Influence of Boundary Conditions, Poisson`s Ratio and Material Non-Linearity on the Optimal Shape
Pedersen, P., 1999
Research output: Book/Report › Report › Research › peer-review
1998

Multi-Parameter Linear Periodic systems: Sensitivity Analysis and Applications
Pedersen, P., Seyranian, A. P. & Solem, F., 1998
Research output: Book/Report › Report › Research › peer-review
Stability Analysis for Multi-Parameter Linear Periodic Systems
Seyranian, A. P., Pedersen, P. & Solem, F., 1998
Research output: Book/Report › Report › Research › peer-review
1997

On an Anisotropic Model for Progressive Damage
Hammer, V. B. & Pedersen, P., 1997
Research output: Book/Report › Report › Research › peer-review
1996

Some General Optimal Design Results using Anisotropic, Non-linear Materials
Pedersen, P., 1996
Research output: Book/Report › Report › Research › peer-review