• Produktionstorvet, 425, 223

    2800 Kgs. Lyngby

    Denmark

1991 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Article in proceedings
2018

Geometric form of gating system elements and its influence on the initial filling phase

Dojka, R., Jezierski, J. & Tiedje, N. S., 2018, 73rd World Foundry Congress (WFC 2018) Creative Foundry: Proceedings of a meeting held 23-27 September 2018, Krakow, Poland. Young Researchers' Seminar . World Foundry Organization, p. 345-346

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Use of high intensity X-ray analysis as tool to create new, fundamental models for phase transformations and residual stress in ductile cast iron

Tiedje, N. S., Bjerre, M. K., Andriollo, T., Azeem, M., Zhang, Y., Fæster, S., Lee, P. D. & Hattel, J. H., 2018, 73rd World Foundry Congress (WFC 2018) Creative Foundry: Proceedings of a meeting held 23-27 September 2018, Krakow, Poland. Young Researchers' Seminar . World Foundry Organization, p. 239-240

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

6 Downloads (Pure)
2016

A contribution to the understanding of the combined effect of nitrogen and boron in grey cast iron

Strande, K., Tiedje, N. S. & Chen, M., 2016, 72nd World Foundry Congress (WFC 2016): Proceedings of a meeting held 21-25 May 2016, Nagoya, Japan. . World Foundry Organization, p. 127-128

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Bonding mechanisms in spot welded three layer combinations

Moghadam, M., Tiedje, N. S., Seyyedian Choobi, M., Nielsen, C. V., Pantleon, K. & Bay, N. O., 2016, Proceedings of 9th International Seminar & Conference on Advances in Resistance Welding . 12 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2 Downloads (Pure)

Step-height measurements on sand surfaces: A comparison between optical scanner and coordinate measuring machine

Mohaghegh, K., Yazdanbakhsh, S. A., Tiedje, N. S. & De Chiffre, L., 2016, Proceedings of euspen’s 16th International Conference & Exhibition,. 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Traceability of optical length measurements on sand surfaces

Mohaghegh, K., Yazdanbakhsh, S. A., Tiedje, N. S. & De Chiffre, L., 2016, Proceedings of euspen’s 16th International Conference & Exhibition. 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2014

A TEM Study on the Ti-Alloyed Grey Iron

Moumeni, E., Tiedje, N. S., Grumsen, F. B., Danielsen, H. K., Horsewell, A. & Hattel, J. H., 2014, TMS2014 Annual Meeting Supplemental Proceedings. Minerals, Metals & Materials Society, p. 943-950

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Effect of Feeder Configuration on the Microstructure of Ductile Cast Iron

Vedel-Smith, N. K. & Tiedje, N. S., 2014, Shape Casting: 5th International Symposium 2014. Tiryakioǧlu, M., Campbell, J. & Byczynski, G. (eds.). Wiley, p. 113-120

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Feeding Against Gravity with Spot Feeders in High Silicon Ductile Iron

Vedel-Smith, N. K. & Tiedje, N. S., 2014, Proceedings of 10th International Symposium on the Science and Processing of Cast Iron - SPCI10. INTEMA, 7 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2012

Analysis of nucleation modelling in ductile cast iron

Moumeni, E., Tutum, C. C., Tiedje, N. S. & Hattel, J. H., 2012, 13rd International conference on advances in solidification process: Session V B: Steel and cast iron. Vol. V B 3. (I O P Conference Series: Materials Science and Engineering; No. 1, Vol. 27).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

1 Downloads (Pure)

A solidification model for unmodified, Na-modified and Sr-modified Al-Si alloys

Tiedje, N. S., Hattel, J. H., Taylor, J. A. & Easton, M. A., 2012, The 3rd International Conference on Advances in Solidification Processes, Rolduc Abbey 2011. IOP Publishing, p. 012033 7 p. (I O P Conference Series: Materials Science and Engineering, Vol. 27).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2010

Influence of New Sol-gel Refractory Coating on the Casting Properties of Cold Box and Furan Cores for Grey Cast iron.

Nwaogu, U. C., Poulsen, T., Bischoff, C. & Tiedje, N. S., 2010, WFC2010. Vol. Session 5-8.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2008

Experimental analysis of flow of ductile cast iron in stream lined gating systems

Skov-Hansen, S. P., Green, N. R. & Tiedje, N. S., 2008, World Foundry Congress. p. 173-176

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Influence of rare earths on shrinkage porosities in thin walled ductile cast iron

Pedersen, K. M. & Tiedje, N. S., 2008, 2. International conference on advances in solidification processes.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Reduced energy consumption by using streamlined gating systems

Skov-Hansen, S. & Tiedje, N. S., 2008, The 8th China Foundry Association Congress.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Resource savings by optimising process conditions in foundries

Tiedje, N. S., Drivsholm, C., Skov-Hansen, S. P. & Crepaz, R., 2008, World Foundry Congress. p. 251-254

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Undercooling, nodule count and carbides in thin walled ductile cast iron

Pedersen, K. M. & Tiedje, N. S., 2008, Proceedings of the 68th World Foundry Congress. World Foundry Organization, p. 167-171

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2007

Undercooling and nodule count in thin walled ductile iron castings

Pedersen, K. M. & Tiedje, N. S., 2007, Solidification Processing 2007: Proceedings of the 5th decennial international conference on solidification processing. Jones, H. (ed.). Great Britain: Department of Engineering Materials, University of Sheffield, p. 456-461

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2006

Numerical modelling of solidification of thin walled hypereutectic ductile cast iron

Pedersen, K. M., Hattel, J. & Tiedje, N., 2006, Modeling of Casting, Welding and Advanced Solidification Processes XI.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Solidification of Hypereutectic Thin Wall Ductile Cast Iron

Pedersen, K. M. & Tiedje, N. S., 2006, Solidification and Gravity IV Material Science Forum. Zurich-uetikon: Trans Tech Publications Ltd., Vol. 508. p. 63-68 (Materials Science Forum, Vol. 508).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

File
382 Downloads (Pure)
2005

Investigation of solidification of thin walled ductile cast iron using temperature measurement

Pedersen, K. M. & Tiedje, N., 2005, Størkning og støbning. M. A. J. S. (ed.). Dansk Metallurgisk Selskab

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearch

2004

Fundamental Metallurgy of Solidification

Tiedje, N., 2004, Dansk Metallurgisk Selskab, Vintermøde. Dansk Metallurgisk Selskab

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Iron melt flow in thin-walled sections using vertically parted moulds

Larsen, P. & Tiedje, N., 2004, World Foundry Congress.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Segregation behaviour and phase developments during solidification of Inconel 625; effect of iron and carbon

Højerslev, C., Tiedje, N. & Hald, J., 2004, 4'th. International Conference on Solidification and Gravity. Trans Tech Publications

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2003

Microstructure of Magnesium alloy AZ91-HP cast in permanent and non-permanent moulds

Tiedje, N., Sørensen, R. K. & Albachari, S., 2003, Creating a Sustainable Competitive Edge for Magnesium. Herning: Normac

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Støbte materialer, nu og i fremtiden

Tiedje, N., 2003, Metalliske Konstruktionsmaterialer. Dansk Metallurgisk Selskab

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review