Aminul Islam

2024

Design Aspects in Vat Photopolymerization Additive Manufacturing of Hydrophobic Surfaces

Danielak, A., Islam, A., Cappelletto, N., Garza Agudelo, D. M. & Pedersen, D. B., 2024, In: 3D Printing and Additive Manufacturing. 11, 4, p. 1545-1554

Research output: Contribution to journal › Journal article › Research › peer-review

Indirect Additive Manufacturing of Amphiphobic Reentrant Surface Structures using Fused Deposition Modelling

Duran, M. M., Zhang, Y. & Islam, A., 2024, In: Journal of Materials Processing Technology. 372, 11 p., 327.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

31 Downloads (Orbit)

Novel approach for optimizing mechanical and damping performance of MABS composites reinforced with basalt fibers: An experimental study

Sujon, M. A. S., Masato, D., Andriollo, T., Pan, Z., Nadimpalli, V. K., Henriquez, V. C. & Islam, A., 2024, In: Composites Science and Technology. 251, 9 p., 110578.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

42 Downloads (Orbit)

Numerical modeling of tomographic volumetric additive manufacturing based on energy threshold method

Salajeghe, R., Šeta, B., Pellizzon, N., Kruse, C. G. S., Marla, D., Islam, A. & Spangenberg, J., 2024, In: Additive Manufacturing. 96, 12 p., 104552.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

8 Downloads (Orbit)

2023

Advances in precision microfabrication through digital light processing: system development, material and applications

Wang, X., Liu, J., Zhang, Y., Kristiansen, P. M., Islam, A., Gilchrist, M. & Zhang, N., 2023, In: Virtual and Physical Prototyping. 18, 1, p. e2248101 42 p.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

133 Downloads (Orbit)

Biocarbon-based sustainable reinforcing system for technical polymers. The structure-properties correlation between polycarbonate (PC) and polybutylene terephthalate (PBT)-based blends containing acrylonitrile-butadiene-styrene (ABS)

Andrzejewski, J., Danielak, A., Piasecki, A., Islam, A. & Szostak, M., 2023, In: Sustainable Materials and Technologies. 36, 19 p., e00612.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

1 Downloads (Orbit)

Enhancement of viscoelastic property of MABS processed by melt compounding and injection molding

Abu Shaid Sujon, M., Madsen, J., de Claville Christiansen, J. & Islam, A., 2023, In: Journal of Applied Polymer Science. 140, 2, 12 p., e53309.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

88 Downloads (Orbit)

Enhancing vibration damping properties of MABS/VDT blends using SEBS-g-MAH as a compatibilizer

Sujon, M. A. S., Andriollo, T. & Islam, A., 2023, In: Journal of Polymer Research. 30, 12, 9 p., 440.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

12 Downloads (Orbit)

The effect of layer height and post-curing temperature on the shape memory properties of smart polymers in vat photopolymerization

Danielak, A., Chauhan, S. S., Islam, A., Andrzejewski, J. & Pedersen, D. B., 2023, In: Rapid Prototyping Journal. 29, 2, p. 354-365

Research output: Contribution to journal › Journal article › Research › peer-review

2022

Characterizing the Aging Process of the Human Eye: Tear Evaporation, Fluid Dynamics, Blood Flow, and Metabolism-Based Comparative Study

Ashiqur Rahman, M., Rabbani, M., Hasan Maruf, M., Islam, A. & S. M. Shihavuddin, A., 2022, In: BioMed Research International. 2022, 16 p., 2805402 .

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

141 Downloads (Orbit)

Effects of Miniaturization on the Quality of Metallized Plastic Parts

Islam, A. & Hansen, H. N., 2022, In: Micromachines. 13, 15 p., 515.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

46 Downloads (Orbit)

Stiffness control in dual color tomographic volumetric 3D printing

Wang, B., Engay, E., Stubbe, P. R., Moghaddam, S. Z., Thormann, E., Almdal, K., Islam, A. & Yang, Y., 2022, In: Nature Communications. 13, 1, 10 p., 367.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

275 Downloads (Orbit)

2021

A comparative performance analysis of zero voltage switching class e and selected enhanced class E inverters

Ashique, R. H., Maruf, M. H., Sourov, K. M. S. H., Islam, M. M., Islam, A., Rabbani, M., Islam, M. R., Khan, M. M. & Shihavuddin, A. S. M., 2021, In: Electronics. 10, 18, 23 p., 2226.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

68 Downloads (Orbit)

An analysis and modeling of the class-e inverter for zvs/zvds at any duty ratio with high input ripple current

Ashique, R. H., Shihavuddin, A. S. M., Khan, M. M., Islam, A., Ahmed, J., Saad Bin Arif, M., Maruf, M. H., Al Mansur, A., Haq, M. A. U. & Siddiquee, A., 2021, In: Electronics. 10, 11, 23 p., 1312.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

89 Downloads (Orbit)

Damping and sound absorption properties of polymer matrix composites: A review

Shaid Sujon, M. A., Islam, A. & Nadimpalli, V. K., 2021, In: Polymer Testing. 23 p., 107388.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

722 Downloads (Orbit)

2020

Advances in Ultrasonic Welding of Thermoplastic Composites: A Review

Bhudolia, S. K., Gohel, G., Leong, K. F. & Islam, A., 2020, In: Materials. 13, 6, 28 p., 1284.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

662 Downloads (Orbit)

Blister Formation in Film Insert Moulding

Wöhner, T., Islam, A., Hansen, H. N., Tosello, G. & R. Whiteside, B., 2020, In: Micromachines. 11, 11 p., 424.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

167 Downloads (Orbit)

Enhanced Energy Savings in Indoor Environments with Effective Daylight Utilization and Area Segregation

Haq, M. A. U., Islam, A., Shihavuddin, A., Maruf, M. H., Al Mansur, A. & Hassan, M. Y., 2020, In: Symmetry. 12, 8, 19 p., 1313.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

93 Downloads (Orbit)

Patterning of worm-like soft polydimethylsiloxane structures using a TiO₂nanotubular array

Harito, C., Lledo, R. C., Bavykin, D. V., Moshrefi-Torbati, M., Islam, A., Yuliarto, B. & Walsh, F. C., 2020, In: Journal of Applied Polymer Science. 137, 45, 11 p., 49795.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

61 Downloads (Orbit)

The Influence of the Hybridization Process on the Mechanical and Thermal Properties of Polyoxymethylene (POM) Composites with the Use of a Novel Sustainable Reinforcing System Based on Biocarbon and Basalt Fiber (BC/BF)

Andrzejewski, J., Gapiński, B., Islam, A. & Szostak, M., 2020, In: Materials. 13, 16, 24 p., 3496.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

135 Downloads (Orbit)

2019

Comprehensive characterization and material modeling for ceramic injection molding simulation performance validations

Tosello, G., Marhöfer, D. M., Islam, A., Müller, T., Plewa, K. & Piotter, V., 2019, In: International Journal of Advanced Manufacturing Technology. 102, p. 225-240

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

459 Downloads (Orbit)

Development of metal–graphene-filled hybrid composites: Characterization of mechanical, thermal, and electrical properties

Doagou Rad, S., Islam, A. & Alnasser, A., 2019, In: Journal of Composite Materials. 53, 24, p. 3363–3376

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

193 Downloads (Orbit)

Investigation of conductive hybrid polymer composites reinforced with copper micro fibers and carbon nanotubes produced by injection molding

Doagou-Rad, S., Islam, A., Antusch, S., Jung, J., Klein, A., Plewa, K. & Piotter, V., 2019, In: Materials Today Communications. 20, 7 p., 100566.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

285 Downloads (Orbit)

Multiscale molecular dynamics-FE modeling of polymeric nanocomposites reinforced with carbon nanotubes and graphene

Doagou-Rad, S., Jensen, J. S., Islam, A. & Mishnaevsky Jr., L., 2019, In: Composite Structures. 217, p. 27-36

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

268 Downloads (Orbit)

Process chains for the mass production of transparent crowns for posterior teeth

Islam, A., Hansen, H. N., Rabenow, L. & Nielsen, K., 2019, In: CIRP Annals. 68, 1, p. 591-594

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

147 Downloads (Orbit)

2018

Correlation of mechanical and electrical properties with processing variables in MWCNT reinforced thermoplastic nanocomposites

Doagou-Rad, S., Islam, A. & Jensen, J. S., 2018, In: Journal of Composite Materials. 52, 26, p. 3681–3697

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

341 Downloads (Orbit)

Direct fabrication of bio-inspired gecko-like geometries with vat polymerization additive manufacturing method

Davoudinejad, A., M. Ribo, M., Pedersen, D. B., Islam, A. & Tosello, G., 2018, In: Journal of Micromechanics and Microengineering. 28, 10 p., 085009.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

444 Downloads (Orbit)

Effect of process parameters on flow length and flash formation in injection moulding of high aspect ratio polymeric micro features

Eladl, A., Mostafa, R., Islam, A., Loaldi, D., Soltan, H., Hansen, H. N. & Tosello, G., 2018, In: Micromachines. 9, 2, 19 p., 58.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

573 Downloads (Orbit)

Interaction of nanofillers in injection-molded graphene/carbon nanotube reinforced PA66 hybrid nanocomposites

Doagou-Rad, S., Islam, A., Jensen, J. S. & Alnasser, A., 2018, In: Journal of Polymer Engineering. 38, 10, p. 971-981

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

295 Downloads (Orbit)

2017

Direct electroplating of plastic for advanced electrical applications

Islam, A., Hansen, H. N. & Tang, P. T., 2017, In: C I R P Annals. 66, 1, p. 209–212

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

1481 Downloads (Orbit)

2016

Experimental Investigation of Comparative Process Capabilities of Metal and Ceramic Injection Molding for Precision Applications

Islam, A., Giannekas, N., Marhöfer, D. M., Tosello, G. & Hansen, H. N., 2016, In: Journal of Micro and Nano-Manufacturing. 4, 3, p. 1-9 031003.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

348 Downloads (Orbit)

Gate Design in Injection Molding of Microfluidic Components Using Process Simulations

Marhöfer, D. M., Tosello, G., Islam, A. & Hansen, H. N., 2016, In: Journal of Micro and Nano-Manufacturing. 4, 2, 12 p., 025001.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

156 Downloads (Orbit)

2015

Quality investigation of miniaturized Moulded Interconnect Devices (MIDs) for hearing aid applications

Islam, A., Hansen, H. N. & Giannekas, N., 2015, In: C I R P Annals. 64, 1, p. 539-544

Research output: Contribution to journal › Journal article › Research › peer-review

2013

A comparative study on life cycle assessment of micro and macro components

Omidvarnia, F., Islam, A., Hansen, H. N. & Olsen, S. I., 2013, In: International Journal of Advanced Manufacturing Technology. 67, p. 1171–1189

Research output: Contribution to journal › Journal article › Research › peer-review

Quality control and process capability assessment for injection-moulded micro mechanical parts

Gasparin, S., Tosello, G., Hansen, H. N. & Islam, A., 2013, In: International Journal of Advanced Manufacturing Technology. 66, p. 1295–1303

Research output: Contribution to journal › Journal article › Research › peer-review

2012

Experimental investigation of new manufacturing process chains to create micro-metal structures on polymer substrates for lab-on-chip sensors

Calaon, M., Islam, A., Hansen, H. N. & Ravn, C., 2012, In: International Journal of Advanced Manufacturing Technology. 59, 1-4, p. 101-109

Research output: Contribution to journal › Journal article › Research › peer-review

Two-component micro injection moulding for hearing aid applications

Islam, A., Hansen, H. N., Marhöfer, D. M., Angel, J. A. B., Dormann, B. & Bondo, M., 2012, In: International Journal of Advanced Manufacturing Technology. 62, 5-8, p. 605-615

Research output: Contribution to journal › Journal article › Research › peer-review

File

1391 Downloads (Orbit)

2011

Effects of Glass Fibres on the Properties of Micro Moulded Plastic Parts

Islam, A., Hansen, H. N., Gasparin, S. & Bondo, M., 2011, In: Commercial Micro Manufacturing Magazine. 4, 7, 9 p.

Research output: Contribution to journal › Journal article › Research

Open Access

File

198 Downloads (Orbit)

2010

Experimental investigation of the factors influencing the polymer-polymer bond strength during two-component injection moulding

Islam, A., Hansen, H. N. & Bondo, M., 2010, In: International Journal of Advanced Manufacturing Technology. 50, 1-4, p. 101-111

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

930 Downloads (Orbit)

Two-component microinjection moulding for MID fabrication

Islam, A., Hansen, H. N., Tang, P. T., Jørgensen, M. B. & Ørts, S. F., 2010, In: Plastics, Rubber & Composites. 39, 7, p. 300-307

Research output: Contribution to journal › Journal article › Research › peer-review

2009

Process chains for the manufacturing of moulded interconnect devices

Islam, M. A., Hansen, H. N., Tang, P. T. & Sun, J., 2009, In: International Journal of Advanced Manufacturing Technology. 42, 9-10, p. 831-841

Research output: Contribution to journal › Journal article › Research › peer-review

2008

Micro-MID Manufacturing By Two-Shot Injection Moulding

Islam, M. A., Hansen, H. N. & Tang, P. T., 2008, In: OnBoard Technology. 9, 2, p. 10-13

Research output: Contribution to journal › Journal article › Research › peer-review

Aminul Islam

Publications

Search results