Aminul Islam

2022

Investigation on the vibration behavior of elastic porous materials for miniaturized systems

Cai, Z., Cutanda Henriquez, V., Islam, A. & Lucklum, F., 2022, Proceedings of the 24^th International Congress on Acoustics. International Commission for Acoustics, 5 p. (Proceedings of the International Congress on Acoustics).

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Open Access

File

63 Downloads (Orbit)

2019

Injection Moulding Simulation and Validation of Thin Wall Components for Precision Applications

Islam, A., Li, X. & Wirska, M., 2019, Advances in Manufacturing II. Gapiński, B., Szostak , M. & Ivanov , V. (eds.). Springer, Vol. 4. p. 96-107

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

2018

Damping Behavior of Carbon Nanotube Reinforced Nanocomposites: Micromechanical Modeling and Experiments

Doagou-Rad, S., Jensen, J. S. & Islam, A., 2018, 18th European Conference on Composite Materials (ECCM-18) . Applied Mechanics Laboratory, 8 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

117 Downloads (Orbit)

2017

Biological features produced by additive manufacturing processes using vat photopolymerization method

Davoudinejad, A., Mendez Ribo, M., Pedersen, D. B., Tosello, G. & Islam, A., 2017, Proceedings of the euspen Special Interest Group Meeting: Micro/Nano Manufacturing. The European Society for Precision Engineering and Nanotechnology, 3 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

1 Downloads (Orbit)

Multi-Scale Modeling of the Structural and Vibrational Behavior of Carbon Nanotube Reinforced Polymeric Nanocomposite Plates

Doagou Rad, S., Jensen, J. S. & Islam, A., 2017, Proceedings of the sixth ECCOMAS Thematic Conference on the Mechanical Response of Composites. Remmers , J. J. C. & Turon , A. (eds.). Eindhoven University of Technology, p. 94-106

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

2016

A conceptual framework for designing micro electrical connectors for hearing aid instruments

Doagou Rad, S., Islam, A. & Fuglsang-Philip, M., 2016, Proceedings of the 11th International Conference on Multi-Material Micro Manufacture (4M2016) : co-organised with 10th International Workshop on Microfactories (IWMF2016). Research Publishing Services, p. 4

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Open Access

File

781 Downloads (Orbit)

Feasibility study of injection mouldable conductive plastic for the hearing aid applications

Merca, T. D. D., Lindberg, T. & Islam, A., 2016, Proceedings of the 11th International Conference on Multi-Material Micro Manufacture (4M2016) : co-organised with 10th International Workshop on Microfactories (IWMF2016). Research Publishing Services, p. 4

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Open Access

File

734 Downloads (Orbit)

Influence of Process Temperatures on Blister Creation in Micro Film Insert Molding of a Dual Layer Membrane

Wöhner, T., R. Whiteside, B., Tosello, G., Hansen, H. N. & Islam, A., 2016, Proceedings of the 11th International Conference on Multi-Material Micro Manufacture (4M2016) : co-organised with 10th International Workshop on Microfactories (IWMF2016). Research Publishing Services, p. 51-54

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Open Access

File

568 Downloads (Orbit)

2015

A comparative study of metal and ceramic injection moulding for precision applications

Islam, A., Giannekas, N., Marhöfer, D. M., Tosello, G. & Hansen, H. N., 2015, Proceedings of the 4M/ICOMM2015 Conference. Annoni, M., Fassi, I., Wiens, G. J. & Dimov, S. (eds.). Research Publishing Services, p. 567-570

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

A Method for Dimensional and Surface Optical Measurements Uncertainty Assessment on Micro Structured Surfaces Manufactured by Jet-ECM

Quagliotti, D., Tosello, G., Islam, A., Hansen, H. N., Zeidler, H., Martin, A., Schubert, A., Brandao, C. & Riemer, O., 2015, Proceedings of the 4M/ICOMM2015 Conference. Annoni, M., Fassi, I., Wiens, G. J. & Dimov, S. (eds.). Research Publishing Services, p. 554-557 138

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

1 Downloads (Orbit)

Characterization method for blisters created in film insert moulding

Wöhner, T., Hansen, H. N., Tosello, G. & Islam, A., 2015, Proceedings of Euspen's 15th International Conference & Exhibition. 3 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

File

229 Downloads (Orbit)

Comparative analysis of different process simulation settings of a micro injection molded part featuring conformal cooling

Marhöfer, D. M., Tosello, G., Islam, A. & Hansen, H. N., 2015, Proceedings of Euspen's 15th International Conference & Exhibition. p. 65-66 2 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

1 Downloads (Orbit)

Gate design in injection molding of microfluidic components using process simulations

Marhöfer, D. M., Tosello, G., Islam, A. & Hansen, H. N., 2015, Proceedings of the 4M/ICOMM2015 Conference. Annoni, M., Fassi, I., Wiens, G. J. & Dimov, S. (eds.). Research Publishing Services

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Mould Design and Material selection for Film Insert Moulding of Direct Methanol Fuel Cell Packaging

Wöhner, T., Senkbeil, S., Olesen, T. L., Hansen, H. N., Islam, A. & Tosello, G., 2015, Proceedings of the 4M/ICOMM2015 Conference. Annoni, M., Fassi, I., Wiens, G. J. & Dimov, S. (eds.). Research Publishing Services, 8 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

154 Downloads (Orbit)

Optical micro-metrology of structured surfaces micro-machined by jet-ECM

Quagliotti, D., Tosello, G., Islam, A., Hansen, H. N., Zeidler, H., Martin, A., Schubert, A., Brandao, C. & Riemer, O., 2015, Proceedings of the 15th International Conference of the european Society for Precision Engineering and Nanotechnology . 2 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Validation of precision powder injection molding process simulations using a spiral test geometry

Marhöfer, M., Müller, T., Tosello, G., Islam, A., Hansen, H. N. & Piotter, V., 2015, Proceedings of the Polymer Processing Society Conference 2015. American Institute of Physics, 4 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Open Access

File

949 Downloads (Orbit)

2014

Experimental investigation on corrosion properties of LDS MID for Hearing Aid applications

Islam, A., Hansen, H. N., Risager, F. & Tang, P. T., 2014, ANTEC 2014 Conference Proceedings. 5 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

File

475 Downloads (Orbit)

Experimental investigation on shrinkage and surface replication of injection moulded ceramic parts

Islam, A., Giannekas, N., Marhöfer, D. M., Tosello, G. & Hansen, H. N., 2014, Proceedings of the 4th International Conference on Nanomanufacturing (nanoMan2014). 6 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

File

575 Downloads (Orbit)

Integrated Design, an Approach Towards DfµMA

Omidvarnia, F., Hansen, H. N., Bissacco, G. & Islam, A., 2014, 13th International Design Conference - Design 2014. Design Society, p. 343-352

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

2013

Advancements on the simulation of the micro injection moulding process

Marhöfer, D. M., Tosello, G., Hansen, H. N. & Islam, A., 2013, Proceedings of the 10th International Conference on Multi-Material Micro Manufacture. 4M Association, 4 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

File

1514 Downloads (Orbit)

Effects of holding pressure and process temperatures on the mechanical properties of moulded metallic parts

Islam, A., Hansen, H. N., Esteves, N. M. & Rasmussen, T. T., 2013, ANTEC 2013 Conference Proceedings. Society of Plastics Engineers, 5 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

File

1899 Downloads (Orbit)

Two-component injection moulding simulation of ABS-POM micro structured surfaces

Tosello, G., Hansen, H. N. & Islam, A., 2013, Proceedings of the 13th euspen International Conference. The European Society for Precision Engineering and Nanotechnology, p. 47-50

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

2012

8 Pin RIC Socket for Hearing Aid Applications

Islam, A., Hansen, H. N., Davids, S. & Kristensen, L., 2012, Proceedings of the 9th International Conference on Multi-Material Micro Manufacture. Noll, H., Adamovic, N. & Dimov, S. (eds.). Research Publishing Services, p. 241-249

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Packing parameters effect on injection molding of polypropylene nanostructured surfaces

Calaon, M., Tosello, G., Hansen, H. N., Ravn, C. & Islam, A., 2012, Proceedings of the 70th Annual Technical Conference & Exhibition. 6 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

File

1064 Downloads (Orbit)

2011

A new pair of hard-soft plastic combination for precision manufacturing of two component plastic parts.

Islam, A., Hansen, H. N., Marhöfer, D. M. & Bondo, M., 2011, Proceedings of 11th International Conference of the European Society for Precision Engineering & Nano Technology. euspen

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

File

426 Downloads (Orbit)

Effects of glass fibers on the properties of micro molded plastic parts

Islam, A. (Invited author), Hansen, H. N. (Invited author), Gasparin, S. (Invited author) & Bondo, M. (Invited author), 2011, ANTEC 2011 Conference. Society of Plastics Engineers

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

File

647 Downloads (Orbit)

2009

2k micro moulding for MID fabrication

Islam, A., Hansen, H. N. & Jørgensen, M. B., 2009, Polymer Process Engineering 09: PPE-Enhanced polymer processing. 1 ed. Bradford: University of Bradford, Vol. 1. p. 273-293 419 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Open Access

File

999 Downloads (Orbit)

Physical masking process for integrating micro metallic structures on polymer substrate: Physical mask

Islam, M. A. & Hansen, H. N., 2009, 9th International Conference of European Society of Precision Engineering and Nanotechnology: EUSPEN. 1st ed. Austria: Euspen-Copy & Druck, Vol. 2nd. p. 22-25 557 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

File

834 Downloads (Orbit)

Two component micro injection molding for MID fabrication

Islam, M. A., Hansen, H. N. & Tang, P. T., 2009, ANTEC 2009 Annual Technical Conference, Chicago, Illinois USA: ANTEC@NPE 2009. Chicago, Illinois USA

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

File

223 Downloads (Orbit)

2008

Introduction of a new pair of thermoplastic materials for precision manufacturing of moulded interconnect devices.

Islam, M. A., Hansen, H. N. & Tang, P. T., 2008, Proceedings of the European Society for Precision Engineering and Nanotechnology: EUSPEN 08. 1 ed. Austria: Copy & Druck, Vol. 2. p. 555-559 647 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research

Two component injection moulding: an interface quality and bond strength dilemma

Islam, M. A., Hansen, H. N. & Tang, P. T., 2008, Proceedings from the 24th Annual Meeting of the Polymer Processing Society: PPS-24. Salerno- Italy, Vol. 24.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research

1 Downloads (Orbit)

2007

Experimental investigation of the factors influencing the polymer-polymer bond strength during two component injection moulding.

Islam, M. A., Hansen, H. N. & Tang, P. T., 2007, Proceedings from PPS07 EA. Copenhagen, Denmark: Hexagon Holding ApS

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research

Selected process chains for manufacturing of moulded interconnect devices (MID)

Hansen, H. N., Tang, P. T., Islam, M. A. & Tosello, G., 2007, Proceedings of the 7th international conference and 9th annual general meeting of euspen. Cranfield, UK: eudpen, Vol. Volume I. p. 176-179

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

2006

Bond strength of two component injection moulded MID

Islam, M. A., Hansen, H. N., Tang, P. T. & Kjær, E. M., 2006, 7th International Congress-Moulded Interconnect Devices: MID 2006. p. 245-252

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research

2003

Pros and cons of mass customization: Masscustomization

Islam, M. A., 2003, Proceedings from the first seminar on Development of Modular Products: Proceedings from DMP seminar. Erixon & Kenger, P. (eds.). 1st ed. Framtidsdalen, Borlange, Sweden: Hogskolan Dalarna, Vol. 1st,. p. 100-1005 232 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Aminul Islam

Publications

Search results