Aminul Islam

Search results

• 2015

  D1.1 Product/Tool/Process Simulation Report for PoT Components: High Precision Micro Production Technologies Collaborative project - Small or medium-scale focused research project1.10.2012 – 30.9.2015

  Marhöfer, M., Tosello, G., Islam, A., Wilson, S., Brask, A., Kanaris, A., Marson, S., Neal, G., van Eijk, J., van Eijk, J., Qian, J., Ziedler, H., Martin, A., Brandao, C., Riemer, O., Brandao, C., Kuschel, S., Geilert, P. & Vogelsang, A., 2015, Hi-Micro project. 26 p.

  Research output: Book/Report › Report › Research

• D1.3 Standardized micro moulding simulation procedure and tolerance guidelines: High Precision Micro Production Technologies Collaborative project - Small or medium-scale focused research project 1.10.2012 – 30.9.2015

  Marhöfer, M., Tosello, G., Islam, A. & Giannekas, N., 2015, Hi-Micro project. 61 p.

  Research output: Book/Report › Report › Research

• D 1.3 Standardized micro moulding simulation procedure and tolerance guidelines: High Precision Micro Production Technologies Collaborative project - Small or medium-scale focused research project 1.10.2012 – 30.9.2015

  Giannekas, N., Islam, A., Marhöfer, M. & Tosello, G., 2015, Hi-Micro project. 3 p.

  Research output: Book/Report › Report › Research
• 2014

  Micro Insert Moulding for the Production of 8 Pin RIC Socket for Hearing Aid Applications

  Islam, A., Hansen, H. N. & Larsen, J. W., 2014, Technical University of Denmark. 30 p.

  Research output: Book/Report › Report › Research

  • Socket 100%
  • Hearing Aid Users 100%
  • Canal 100%
  • Insert Molding 100%
  • Process Design 100%
• 2013

  Handbook of LDS MID

  Islam, A. & Risager, F., 2013, Sonion. 34 p.

  Research output: Book/Report › Report › Research

• Manufacturing-Oriented Product Design. MS3 - Definition of WP1 RTD requirements: Collaborative project - Small or medium-scale focused research project 1.10.2012 – 30.9.2015

  Tosello, G., Marhöfer, D. M. & Islam, A., 2013, Hi-Micro project. 17 p.

  Research output: Book/Report › Report › Research

• Manufacturing-Oriented Product Design. MS6 - Micro Moulding Simulation Standard Procedure: Collaborative project - Small or medium-scale focused research project 1.10.2012 – 30.9.2015

  Tosello, G., Marhöfer, D. M. & Islam, A., 2013, Hi-Micro project. 17 p.

  Research output: Book/Report › Report › Research

• Report on final demonstrator production and validation: Converging technologies for micro systems manufacturing. Deliverable D7.3.5

  Islam, A., 2013, 167 p.

  Research output: Book/Report › Report › Research
• 2012

  Demonstrator realization with basic process: COTECH Deliverable 7.2.1 (CP-IP 214491-2)

  Islam, A. & Albertin, T., 2012, Vienna: COTECH. 62 p. (COnverging TECHnologies for micro systems manufacturing).

  Research output: Book/Report › Report › Research › peer-review

• Prototypes realization with high-risk process: Draft. COTECH deliverable D7.2.3 (CP-IP 214491-2)

  Islam, A. & Garcia, I., 2012, COTECH. (COnverging TECHnologies for micro systems manufacturing).

  Research output: Book/Report › Report › Research › peer-review

• Prototypes realization with medium-risk process: COTECH Deliverables D7.2.2 (CP-IP 214491-2)

  Islam, A., 2012, COTECH. 95 p. (COnverging TECHnologies for micro systems manufacturing).

  Research output: Book/Report › Report › Research › peer-review

• Report on prototypes characterization basic process: COTECH Deliverable 7.3.1 (CP-IP 214491-2)

  Islam, A. & Esmoris, J. I., 2012, Vienna: COTECH. 58 p. (COnverging TECHnologies for micro systems manufacturing).

  Research output: Book/Report › Report › Research › peer-review

  2 Downloads (Orbit)

• Report on prototypes characterization medium-risk process, COTECH D7.3.2: Draft. COTECH Deliverable 7.3.2 (CP-IP 214491-2)

  Islam, A. & Staemmler, L., 2012, COTECH. 54 p. (COnverging TECHnologies for micro systems manufacturing).

  Research output: Book/Report › Report › Research › peer-review

• Report on prototypes characterization medium-risk process, COTECH D7.3.3: Final. COTECH Deliverable 7.3.3 (CP-IP 214491-2)

  Padovani, S. & Islam, A., 2012, COTECH. 63 p. (COnverging TECHnologies for micro systems manufacturing).

  Research output: Book/Report › Report › Research › peer-review

  1 Downloads (Orbit)
• 2011

  Demonstrator desing for high risk process: COTECH Deliverable 7.1.3 (CP-IP 214491-2)

  Islam, A., 2011, Vienna: COTECH. 49 p. (COnverging TECHnologies for micro systems manufacturing).

  Research output: Book/Report › Report › Research › peer-review
• 2010

  Report on converging insert moulding with µ-IM: COTECH D5.2.1

  Islam, A., 2010, 1st ed. Vienna: COTECH. 47 p. (COTECH Deliverables; No. SP5).

  Research output: Book/Report › Report › Research › peer-review

  • Tasks 100%
  • Insert Molding 100%
  • Technical Feasibility 100%
  • Convergent 50%
  • Art Information 28%

• Tactile and visual perception of injection moulded plastic parts: Tactile and visual perception

  Islam, A. (Supervisor), Jensen, J. T., Akbas, E. & Madsen, M., 2010, DTU: Technical University of Denmark. Department of Mechanical Engineering. 28 p.

  Research output: Book/Report › Report › Research

  • Plastic Part 100%
  • Ergonomics 100%
  • Tactile Perception 100%
  • Light Switch 100%
  • Visual Perception 100%
  1 Downloads (Orbit)
• 2009

  Examining the influence of injection speed and mould temperature on the tensile strength of polypropylene and ABS

  Aarøe, E. R., Blaimschein, K. S., Deker, L., Stentoft-Christensen, H. C., Islam, M. A. (Supervisor) & Hansen, H. N. (Supervisor), 2009, 1st ed. Kgs. Lyngby, Denmark: Technical University of Denmark. 89 p.

  Research output: Book/Report › Report › Research › peer-review

  File

  • Mould Temperature 100%
  • Injection Speed 100%
  • Ultimate Tensile Strength 100%
  • Polypropylene 100%
  • Test Setup 20%
  2741 Downloads (Orbit)

• Report on best practice for micro/nano replication process data acquisition systems: COTECH process characterization

  Islam, M. A., 2009, 1st ed. COTECH administrator. 48 p. (COTECH Deliverables; No. COTECH D 4.2.1).

  Research output: Book/Report › Report › Research › peer-review

  • Data Acquisition System 100%
  • Process Control 100%
  • Nano-replication 100%
  • Data Acquisition Process 100%
  • Process Parameter 50%

• Report on COTECH test procedure and characterization techniques: COTECH Deliverable

  Islam, M. A. & Hansen, H. N. (Supervisor), 2009, COTECH administrator. 42 p.

  Research output: Book/Report › Report › Research › peer-review

  • Electronic Component 100%
  • Lamp 100%
  • Intraocular Lens 100%
  • Materials Characterization Technique 100%
  • Cell Phone 100%

• Report on process requirements: COTECH D1.1.2

  Islam, M. A. & Hansen, H. N. (Supervisor), 2009, COTECH administrator. 36 p. (COTECH Deliverables).

  Research output: Book/Report › Report › Research › peer-review

  • Process Requirements 100%
  • Process Requirement 100%
  • Industrial Demonstrator 18%
  • Microfluidic Channel 10%
  • Cellphone 10%

• Report on the benchmark of products & processes and ranking of cruciality and criticity: Benchmarking products and processes

  Islam, A., 2009, 1st ed. Austria: COTECH officials. 71 p. (COTECH deliverables; No. COTECH D1.4.1).

  Research output: Book/Report › Report › Research › peer-review

  • Diagnosis 100%
  • Flushing 100%
  • Intraocular Lens 100%
  • Criticity 100%
• 2008

  Moulded interconnect device fabrication by two shot molding and lasert induced selective activation

  Sun, J., Islam, M. A. (Supervisor) & Hansen, H. N., 2008, 1st ed. Kgs. Lyngby, Denmark: Technical University of Denmark. 89 p.

  Research output: Book/Report › Report › Research › peer-review

  • Injection Molding 100%
  • Device Fabrication 100%
  • Interconnects 100%
  • Polyetheretherketone 66%
  • Thermoplastics 66%
• 2006

  Bond strength investigation of two shot moulded polymer

  Islam, M. A., 2006, Kgs. Lyngby: Department of Manufacturing Engineering and Management, DTU. 60 p.

  Research output: Book/Report › Report › Research

  • Bond Strength 100%
  • Mechanical Strength 100%
  • Manufacturing Process 25%
  • Injection Moulding 25%
  • Experimental Work 25%

• Injection moulding for macro and micro products

  Islam, M. A., 2006, DTU: IPL. 107 p.

  Research output: Book/Report › Report › Research

  • Injection Moulding 100%
  • Micro Product 100%
  • Injection Molding 100%
  • Two-component 66%
  • Micro-area 66%
• 2005

  Microfactory

  Islam, M. A., 2005, IPL: IPL. 52 p.

  Research output: Book/Report › Report › Research

  File
  721 Downloads (Orbit)