• Frederiksborgvej 399, 114, S22

    4000 Roskilde

    Denmark

20042022

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2020

Global Optimization of Offshore Wind Farm Collection Systems

Pérez-Rúa, J-A., Stolpe, M., Das, K. & Cutululis, N. A., 2020, (Accepted/In press) In : IEEE Transactions on Power Systems. 12 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
10 Downloads (Pure)

Integrated Global Optimization Model for Electrical Cables in Offshore Wind Farms

Pérez-Rúa, J-A., Stolpe, M. & Cutululis, N. A., 2020, (Accepted/In press) In : I E E E Transactions on Sustainable Energy. 10 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
33 Downloads (Pure)

Representation of wind turbine blade responses in power production load cases by linear mode shapes

Gözcü, O. & Stolpe, M., 2020, (Accepted/In press) In : Wind Energy. 14 p.

Research output: Contribution to journalJournal articleResearchpeer-review

2019

Fail-safe truss topology optimization

Stolpe, M., 2019, In : Structural and Multidisciplinary Optimization. 60, 4, p. 1605-1618 14 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Structural optimization based design of jacket type sub-structures for 10 MW offshore wind turbines

Natarajan, A., Stolpe, M. & Njomo Wandji, W., 2019, In : Ocean Engineering. 172, p. 629-640

Research output: Contribution to journalJournal articleResearchpeer-review

2018

A working-set approach for sizing optimization of frame-structures subjected to time-dependent constraints

Verbart, A. & Stolpe, M., 2018, In : Structural and Multidisciplinary Optimization. 58, 4, p. 1367-1382

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
38 Downloads (Pure)

Conceptual jacket design by structural optimization

Sandal, K., Verbart, A. & Stolpe, M., 2018, In : Wind Energy. 21, 12, p. 1423-1434

Research output: Contribution to journalJournal articleResearchpeer-review

Integrated optimal design of jackets and foundations

Sandal, K., Latini, C., Zania, V. & Stolpe, M., 2018, In : Marine Structures. 61, p. 398-418 21 p.

Research output: Contribution to journalJournal articleResearchpeer-review

1 Downloads (Pure)

Optimal design of cathodic protection systems for offshore wind turbine support structures

Sarhadi, A., Abrahamsen, A. B. & Stolpe, M., 2018.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
82 Downloads (Pure)

Optimal design of galvanic corrosion protection systems for offshore wind turbine support structures

Sarhadi, A., Abrahamsen, A. B. & Stolpe, M., 2018, In : Corrosion. 74, 7, p. 829-841

Research output: Contribution to journalJournal articleResearchpeer-review

Structural optimization with several discrete design variables per part by outer approximation

Stolpe, M. & Sandal, K., 2018, In : Structural and Multidisciplinary Optimization. 57, 5, p. 2061-2073

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access

The equivalent static loads method for structural optimization does not in general generate optimal designs

Stolpe, M., Verbart, A. & Rojas Labanda, S., 2018, In : Structural and Multidisciplinary Optimization. 58, 1, p. 139-154 16 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
901 Downloads (Pure)
2017

Analytical gradients of wind turbine towers fatigue loads

Tibaldi, C., Hansen, M. H. & Stolpe, M., 2017, 28 p. (DTU Wind Energy E, Vol. 0138).

Research output: Book/ReportReport

Open Access
File
635 Downloads (Pure)

A short numerical study on the optimization methods influence on topology optimization

Rojas Labanda, S., Sigmund, O. & Stolpe, M., 2017, In : Structural and Multidisciplinary Optimization. 56, 6, p. 1603-1612

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
193 Downloads (Pure)
2016

An efficient second-order SQP method for structural topology optimization

Rojas Labanda, S. & Stolpe, M., 2016, In : Structural and Multidisciplinary Optimization. 53, 6, p. 1315-1333

Research output: Contribution to journalJournal articleResearchpeer-review

Conceptual optimal design of jackets

Sandal, K., Verbart, A. & Stolpe, M., 2016. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
123 Downloads (Pure)

Design optimization of jacket structures for mass production

Sandal, K., Verbart, A. & Stolpe, M., 2016. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
50 Downloads (Pure)

Free material optimization for laminated plates and shells

Weldeyesus, A. G. & Stolpe, M., 2016, In : Structural and Multidisciplinary Optimization. 53, 6, p. 1335-1347

Research output: Contribution to journalJournal articleResearchpeer-review

1 Downloads (Pure)

Truss optimization with discrete design variables: a critical review

Stolpe, M., 2016, In : Structural and Multidisciplinary Optimization. 53, 2, p. 349-374 26 p.

Research output: Contribution to journalJournal articleResearchpeer-review

2015

A primal-dual interior point method for large-scale free material optimization

Weldeyesus, A. G. & Stolpe, M., 2015, In : Computational Optimization and Applications. 61, 2, p. 409-435 27 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Automatic penalty continuation in structural topology optimization

Rojas Labanda, S. & Stolpe, M., 2015, In : Structural and Multidisciplinary Optimization. 52, 6, p. 1205-1221 17 p.

Research output: Contribution to journalJournal articleResearchpeer-review

1 Downloads (Pure)

Benchmarking optimization solvers for structural topology optimization

Rojas Labanda, S. & Stolpe, M., 2015, In : Structural and Multidisciplinary Optimization. 52, 3, p. 527-547

Research output: Contribution to journalJournal articleResearchpeer-review

DTU Wind Energy - Support structures

Stolpe, M., 27 Mar 2015

Research output: Non-textual formSound/Visual production (digital)Communication

Open Access

Global blending optimization of laminated composites with discrete material candidate selection and thickness variation

Sørensen, S. N. & Stolpe, M., 2015, In : Structural and Multidisciplinary Optimization. 52, 1, p. 137-155

Research output: Contribution to journalJournal articleResearchpeer-review

Mathematical Programming Methods for Large-scale Structural Topology Optimization

Rojas Labanda, S. & Stolpe, M., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
197 Downloads (Pure)

On Solving Large-Scale Free Material Optimization Problems

Weldeyesus, A. G. & Stolpe, M., 2015

Research output: Non-textual formSound/Visual production (digital)Research

File
50 Downloads (Pure)

Optimal Design of Stiffeners for Bucket Foundations

Courtney, W. T., Stolpe, M., Buhl, T., Bitsche, R., Hallum, N. & Nielsen, S. A., 2015, Proceedings of EWEA Offshore 2015 Conference. European Wind Energy Association (EWEA), 7 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
458 Downloads (Pure)

Optimal Design of Stiffeners for Bucket Foundations

Courtney, W. T., Stolpe, M., Buhl, T., Bitsche, R., Hallum, N. & Nielsen, S. A., 2015. 1 p.

Research output: Contribution to conferencePosterResearch

File
83 Downloads (Pure)

Truss topology optimization with discrete design variables by outer approximation

Stolpe, M., 2015, In : Journal of Global Optimization. 61, 1, p. 139-163 25 p.

Research output: Contribution to journalJournal articleResearchpeer-review

2014

Benchmarking of optimization methods for topology optimization problems

Rojas Labanda, S. & Stolpe, M., 2014

Research output: Non-textual formSound/Visual production (digital)Research

Open Access
File
1664 Downloads (Pure)

Multidisciplinary Free Material Optimization for Laminated Plates and Shells

Weldeyesus, A. G. & Stolpe, M., 2014

Research output: Non-textual formSound/Visual production (digital)Research

Open Access
File
55 Downloads (Pure)

Multidisciplinary Free Material Optimization of 2D and Laminate Structures

Weldeyesus, A. G., Stolpe, M. & Gaile, S., 2014

Research output: Non-textual formSound/Visual production (digital)Research

Open Access
File
60 Downloads (Pure)

Offshore wind energy developments

Stolpe, M., Buhl, T., Sumer, B. M., Kiil, S., Holbøll, J. & Piirainen, K., 2014, DTU International Energy Report 2014: Wind energy — drivers and barriers for higher shares of wind in the global power generation mix. Hvidtfeldt Larsen, H. & Sønderberg Petersen, L. (eds.). Technical University of Denmark, p. 43-51

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

Open Access
File
773 Downloads (Pure)

On the equivalent static loads approach for dynamic response structural optimization

Stolpe, M., 2014, In : Structural and Multidisciplinary Optimization. 50, 6, p. 921-926 6 p.

Research output: Contribution to journalJournal articleResearchpeer-review

1 Downloads (Pure)
2013

Mathematical programming methods for large-scale topology optimization problems

Rojas Labanda, S. & Stolpe, M., 2013.

Research output: Contribution to conferenceConference abstract for conferenceResearch

Open Access
File
79 Downloads (Pure)

Optimal Design of Composite Structures by Advanced Mixed Integer Nonlinear Optimization

Marmaras, K. & Stolpe, M., 2013. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File
79 Downloads (Pure)

Optimal Design of Composite Structures by Advanced Mixed Integer Nonlinear Optimization

Marmaras, K., Stolpe, M., Lund, E. & Sørensen, R., 2013

Research output: Non-textual formSound/Visual production (digital)Research

File
92 Downloads (Pure)

Optimal Design of Composite Structures by Advanced Mixed Integer Nonlinear Optimization

Marmaras, K., Stolpe, M., Lund, E. & Sørensen, R., 2013

Research output: Non-textual formSound/Visual production (digital)Research

File
110 Downloads (Pure)
2012

A Greedy Algorithm for a Special Class of Geometric Set Covering Problems

Stolpe, M. & Bechmann, A., 2012, DTU Wind Energy. 9 p. (DTU Wind Energy E; No. 0013(EN)).

Research output: Book/ReportReport

Open Access
File
319 Downloads (Pure)

Estimating the workpiece-backingplate heat transfer coefficient in friction stirwelding

Larsen, A., Stolpe, M. & Hattel, J. H., 2012, In : Engineering Computations. 29, 1, p. 65-82

Research output: Contribution to journalJournal articleResearchpeer-review

Multi-material topology optimization of laminated composite beam cross sections

Blasques, J. P. A. A. & Stolpe, M., 2012, In : Composite Structures. 94, p. 3278-3289

Research output: Contribution to journalJournal articleResearchpeer-review

File
1269 Downloads (Pure)
2011

Generalized Benders’ Decomposition for topology optimization problems

Munoz Queupumil, E. J. & Stolpe, M., 2011, In : Journal of Global Optimization. 51, 1, p. 149-183

Research output: Contribution to journalJournal articleResearchpeer-review

Global optima for the Zhou–Rozvany problem

Stolpe, M. & Bendsøe, M. P., 2011, In : Structural and Multidisciplinary Optimization. 43, 2, p. 151-164

Research output: Contribution to journalJournal articleResearchpeer-review

Maximum stiffness and minimum weight optimization of laminated composite beams using continuous fiber angles

Blasques, J. P. A. A. & Stolpe, M., 2011, In : Structural and Multidisciplinary Optimization. 43, 4, p. 573-588

Research output: Contribution to journalJournal articleResearchpeer-review

Optimal Structural Design by Free Material Optimization

Stolpe, M., 2011, Sixth European Aeronautics Days Book.

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Optimization strategies for discrete multi-material stiffness optimization

Hvejsel, C. F., Lund, E. & Stolpe, M., 2011, In : Structural and Multidisciplinary Optimization. 44, 2, p. 149-163

Research output: Contribution to journalJournal articleResearchpeer-review

2010

Efficient computational procedures for topology optimization of nonlinear structures

Amir, O., Stolpe, M. & Sigmund, O., 2010.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Efficient use of iterative solvers in nested topology optimization

Amir, O., Stolpe, M. & Sigmund, O., Jul 2010, In : Structural and Multidisciplinary Optimization. 42, 1, p. 55-72

Research output: Contribution to journalJournal articleResearchpeer-review