Photo of Martin Alexander Eder
  • Frederiksborgvej 399, 115, S18

    4000 Roskilde

    Denmark

20132020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

  • 14 Journal article
  • 2 Article in proceedings
  • 1 Report
2020

A semi-analytical stress correction method for bi-material Mode-III V-notches

Eder, M. A. & Sarhadi, A., 2020, In : Theoretical and Applied Fracture Mechanics. 106, 10 p., 102443.

Research output: Contribution to journalJournal articleResearchpeer-review

FASTIGUE: A computationally efficient approach for simulating discrete fatigue crack growth in large-scale structures

Eder, M. A. & Chen, X., 2020, In : Engineering Fracture Mechanics. 233, 17 p., 107075.

Research output: Contribution to journalJournal articleResearchpeer-review

2019

Multiaxial Stress Based High Cycle Fatigue Model for Adhesive Joint Interfaces

Eder, M. A., Semenov, S. & Sala, M., 2019, ICCES 2019: Computational and Experimental Simulations in Engineering: Proceedings of ICCES2019. Springer, p. 621-632 12 p. (Mechanisms and Machine Science, Vol. 75).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Stresses in constant tapered beams with thin-walled rectangular and circular cross sections

Bertolini, P., Eder, M. A., Taglialegne, L. & Valvo, P. S., 2019, In : Thin-Walled Structures. 137, p. 527-540 14 p.

Research output: Contribution to journalJournal articleResearchpeer-review

2018

A conservative approach for mode I-II fatigue analysis under residual stresses: The RSIF proportionality conjecture

Ruiz Muñoz, G. A. & Eder, M. A., 2018, In : Fatigue & Fracture of Engineering Materials and Structures. 41, 11, p. 2350-2361

Research output: Contribution to journalJournal articleResearchpeer-review

An Improved Sub-component Fatigue Testing Method for Material Characterization

Belloni, F., Eder, M. A. & Cherrier, B., 2018, In : Experimental Techniques. 42, 5, p. 533-550

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
233 Downloads (Pure)

Effects of Coatings on the High-Cycle Fatigue Life of Threaded Steel Samples

Eder, M. A., Haselbach, P. U. & Mishin, O. V., 2018, In : Journal of Materials Engineering and Performance. 27, 6, p. 3184-3198 15 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
140 Downloads (Pure)
2017

A multi-frequency fatigue testing method for wind turbine rotor blades

Eder, M. A., Belloni, F., Tesauro, A. & Hanis, T., 2017, In : Journal of Sound and Vibration. 388, p. 123-140 18 p.

Research output: Contribution to journalJournal articleResearchpeer-review

2016

A comprehensive investigation of trailing edge damage in a wind turbine rotor blade

Haselbach, P. U., Eder, M. A. & Belloni, F., 2016, In : Wind Energy. 19, 10, p. 1871–1888 18 p.

Research output: Contribution to journalJournal articleResearchpeer-review

2015

A qualitative analytical investigation of geometrically nonlinear effects in wind turbine blade cross sections

Eder, M. A. & Bitsche, R., 2015, In : Thin-Walled Structures. 93, p. 1-9

Research output: Contribution to journalJournal articleResearchpeer-review

File
366 Downloads (Pure)

A versatile stereo photogrammetry based technique for measuring fracture mode displacements in structures

Alvarado, J. S., Eder, M. A. & Tesauro, A., 2015, In : Precision Engineering. 39, p. 38-46

Research output: Contribution to journalJournal articleResearchpeer-review

Effects of geometric non-linearity on energy release rates in a realistic wind turbine blade cross section

Eder, M. A., Bitsche, R. & Belloni, F., 2015, In : Composite Structures. 132, p. 1075–1084

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
262 Downloads (Pure)

Experimental Blade Research - phase 2

Eder, M. A., Branner, K., Berring, P., Belloni, F., Stensgaard Toft, H., Sørensen, J. D., Corre, A., Lindby, T., Quispitupa, A. & Petersen, T. K., 2015, DTU Wind Energy. 108 p. (DTU Wind Energy E; No. 0083).

Research output: Book/ReportReportResearch

Open Access
File
1035 Downloads (Pure)

Fracture analysis of adhesive joints in wind turbine blades

Eder, M. A. & Bitsche, R., 2015, In : Wind Energy. 18, 6, p. 1007-1022 16 p.

Research output: Contribution to journalJournal articleResearchpeer-review

1 Downloads (Pure)
2014

A practical approach to fracture analysis at the trailing edge of wind turbine rotor blades

Eder, M. A., Bitsche, R., Nielsen, M. & Branner, K., 2014, In : Wind Energy. 17, 3, p. 483-497

Research output: Contribution to journalJournal articleResearchpeer-review

Measurement of local relative displacements in large structures

Tesauro, A., Eder, M. A. & Nielsen, M., 2014, In : Journal of Strain Analysis for Engineering Design. 49, 5, p. 301-314

Research output: Contribution to journalJournal articleResearchpeer-review

File
535 Downloads (Pure)
2013

Applications of the BEam Cross section Analysis Software (BECAS)

Blasques, J. P. A. A., Bitsche, R., Fedorov, V. & Eder, M. A., 2013, Proceedings of the 26th Nordic Seminar on Computational Mechanics. Logg, A., Mardal, K-A. & Massing, A. (eds.). Center for Biomedical Computing, Simula Research Laboratory, p. 46-49

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
3875 Downloads (Pure)