• Produktionstorvet, 425, 217

    2800 Kgs. Lyngby

    Denmark

20112021

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference article
2018

Accurate measurements in a production environment using dynamic length metrology (DLM)

Chiffre, L. D., González-Madruga, D., Costa, G. D., Sonne, M. R., Mohammadi, A., Hattel, J. H., Hansen, H. N., Mohaghegh, K., Meftahpour, M., Meinertz, J. & Meinertz, C., 2018, In : Procedia CIRP. 75, p. 343-348

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
322 Downloads (Pure)

Compensation of in-line metrology of polymer parts based on 3D thermomechanical analyses

Sonne, M. R., Costa, G. D., Madruga, D. G., Chiffre, L. D. & Hattel, J. H., 2018, In : Procedia CIRP. 75, p. 349-354

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
190 Downloads (Pure)
2016

Effect of Geometry in Frequency Response Modeling of Nanomechanical Resonators

Esfahania, M. N., Yilmaz, M., Sonne, M. R., Hattel, J. H. & Alaca, B. E., 2016, In : Aip Conference Proceedings. 1738, 4 p., 030044.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
156 Downloads (Pure)

Improvement in Surface Characterisitcs of Polymers for Subsequent Electroless Plating Using Liquid Assisted Laser Processing

Marla, D., Zhang, Y., Jabbaribehnam, M., Sonne, M. R., Spangenberg, J. & Hattel, J. H., 2016, In : Physics Procedia. 83, p. 211-217

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
407 Downloads (Pure)

Modelling the deformation of nickel foil during manufacturing of nanostructures on injection moulding tool inserts

Sonne, M. R., Cech, J., Pranov, H., Kofod, G., Garnæs, J., Lam, Y. C., Hattel, J. H. & Taboryski, R. J., 2016, In : A I P Conference Proceedings Series. 1769, 6 p., 090003.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
216 Downloads (Pure)
2015

Comparison of residual stresses in sand- and chill casting of ductile cast iron wind turbine main shafts

Sonne, M. R., Frandsen, J. O. & Hattel, J. H., 2015, In : I O P Conference Series: Materials Science and Engineering. 84, 10 p., 012025.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
400 Downloads (Pure)

Integrated FEM-DBEM simulation of crack propagation in AA2024-T3 FSW butt joints considering manufacturing effects

Sonne, M. R., Carlone, P., Citarella, R. & Hattel, J. H., 2015, In : Key Engineering Materials. 651-653, p. 877-882

Research output: Contribution to journalConference articleResearchpeer-review