No photo of Leo Alting
  • 427, 105

    Denmark

1988 …2018
If you made any changes in Pure these will be visible here soon.

Research Output 1994 2018

2018
51 Downloads (Pure)

Life cycle targets applied in highly automated car body manufacturing – Method and algorithm

Rödger, J-M., Bey, N., Alting, L. & Hauschild, M. Z., 2018, In : Journal of Cleaner Production. 194, p. 786-799 14 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
2016
120 Downloads (Pure)

Activity-based Sustainability Assessment of Highly Automated Manufacturing

Rödger, J-M., Bey, N. & Alting, L., 2016.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
207 Downloads (Pure)

The Sustainability Cone - A holistic framework to integrate sustainability thinking into manufacturing

Rödger, J-M., Bey, N. & Alting, L., 2016, In : C I R P Annals. 65, 1, p. 1-4 4 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
2014
1 Downloads (Pure)

A system boundary identification method for life cycle assessment

Li, T., Zhang, H., Liu, Z., Ke, Q. & Alting, L., 2014, In : The International Journal of Life Cycle Assessment. 19, 3, p. 646-660

Research output: Contribution to journalJournal articleResearchpeer-review

2008

The incoming global technological and industrial revolution towards competitive sustainable manufacturing

Jovane, F., Yoshikawa, H., Alting, L., Boer, C. R., Westkamper, E., Williams, D., Tseng, M., Seliger, G. & Paci, A. M., 2008, In : CIRP annals. 57, 2, p. 641-659

Research output: Contribution to journalJournal articleResearchpeer-review

2007

Evolving production networks

Grunow, M., Günther, H. O., Burdenik, H. & Alting, L., 2007

Research output: Non-textual formSound/Visual production (digital)Research

Evolving production network structures

Grunow, M., Gunther, H. O., Burdenik, H. & Alting, L., 2007, In : C I R P Annals. 56, 1, p. 427-430

Research output: Contribution to journalJournal articleResearchpeer-review

New perspectives on design and innovation

Alting, L., Clausen, C., Jørgensen, U. & Yoshinaka, Y., 2007, CIRP conference proceedings. Berlin: CIRP, 12 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2006

Architecture of Environmental Engineering

Wenzel, H. & Alting, L., 2006, Proceedings of the IV Globale Conference on Sustainable Product Development and Life Cycle Engineering.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Design and Innovation - The DTU programme

Alting, L., Andreasen, M. M., Boelskifte, P., Clausen, C. & Jørgensen, U., 2006, Proceedings of the 16th CIRP international Design Seminar.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

1638 Downloads (Pure)

Human Factors in the Management of Production

Jensen, P. L. & Alting, L., 2006, Annals of the CIRP annual congress.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

File

Life Cycle Engineering and Management

Alting, L., Hauschild, M. Z. & Wenzel, H., 2006, Sustainability in Manufacturing: Recovery of Resources in Product and Material Cycles. Berlin Heidelberg: Springer, p. 31-67 423 p.

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

2005

From life cycle assessment to sustainable production: Status and perspectives

Hauschild, M. Z., Jeswiet, J. & Alting, L., 2005, In : CIRP Annals : Manufacturing Technology. 54, 2, p. 535-554

Research output: Contribution to journalJournal articleResearchpeer-review

2004

Architecture of Environmental Engineering

Wenzel, H. & Alting, L., 2004, Global Conference on Sustainable Product Development and Life Cycle Engineering. S. G. N. N. B. B. A. L. A. (ed.). Berlin: uni-edition GmbH

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Design for the environment - do we get the focus right?

Hauschild, M. Z., Jeswiet, J. & Alting, L., 2004, In : C I R P Annals. 53, 1, p. 1-4

Research output: Contribution to journalConference articleResearchpeer-review

Nano Manufacturing - Products and Technologies

Hansen, H. N. & Alting, L., 2004, Proceedings of the 2nd International Symposium on Nanomanufacturing (ISNM 2004). D. G. G. K. H. H. H. C. LE. (ed.). Daejeon: KAIST

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Product Life Cycle - Quality Management Issues

Alting, L. & Majstorovic, V. D., 2004, Proceedings of the 11th International CIRP Life Cycle Engineering Seminar, June 20-22, 2004, Belgrade, Serbia: product life cycle - quality management issues. P. D. L. A. P. D. V. D. M. (ed.). Belgrade, Serbia: Assoc. Serbia & Montenegro for Quality and Standardization, Mechanical Engineering Faculty, 241 p.

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearch

Virksomhedsledelse under ændrede omverdensbetingelser

Alting, L. & Hvam, L., 2004, Viden om Ledelse. J. P. U. (ed.). København: Børsens Forlag A/S, p. 175-185

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearch

2003

Biomimetics applied to centering in micro-assembly

Shu, L. H., Lenau, T. A., Hansen, H. N. & Alting, L., 2003, In : C I R P Annals. 52, 1, p. 101-104

Research output: Contribution to journalJournal articleResearchpeer-review

Engineering for Sustainable Development - An obligatory Skill of the Future Engineer

Hauschild, M. Z., Alting, L., Molin, C. & Poll, C., 2003, CIRP Life Cycle Engineering Seminar proceedings. H. M. . A. L. . M. C. . P. C. (ed.). Copenhagen, Denmark: Institut for Produktion og Ledelse, DTU

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearch

Life Cycle Engineering – from methodology to enterprise culture

Hauschild, M. Z., Alting, L. & Poll, C., 2003, Design and Manufacture for Sustainable Development 2003. B. H. (ed.). London: Professional Engineering Publishing, p. 3-22

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearch

Micro Engineering

Alting, L., Kimura, F., Hansen, H. N. & Bissacco, G., 2003, In : C I R P Annals. 52, 2, p. 635-658

Research output: Contribution to journalJournal articleResearchpeer-review

Proceedings of the 1st CIRP Seminar on Micro and Nano Technology

Hansen, H. N. & Alting, L., 2003, Proceedings of the 1st CIRP seminar on Micro and Nano Technology. Micro Engineering.. H. N. H. L. A. (ed.). DTU Management Engineering, 98 p.

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearch

Product Development in Micro and Nano Manufacturing - The Challenge of the Future

Alting, L. & Hansen, H. N., 2003, First International Symposium on Nano Manufacturing. First International Symposium on Nano Manufacturing

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2002

Department of Manufacturing Engineering and Management - a new profile in education and research

Alting, L. & Hattel, J. H., 2002, International Manufacturing Education Conference. Enschede: University of Twente

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2001

Engineering for Sustainable Development - an Obligatory Skill of the Future Engineer

Alting, L., 2001, Engineering for Sustainable Development - an Obligatory Skill of the Future Engineer. IPL

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Life cycle management and assessment: approaches and visions towards sustainable manufacturing

Westkämper, E., Alting, L. & Arndt, G., 2001, In : Proceedings of the Institution of Mechanical Engineers Part B-journal of Engineering Manufacture. 215, 5, p. 599-626

Research output: Contribution to journalConference articleResearchpeer-review

Trends and perspectives - An architecture for agile shop floor control systems

Langer, G. & Alting, L., 2001, In : Journal of Manufacturing Systems. 19 (4), p. 267-281

Research output: Contribution to journalJournal articleResearchpeer-review

2000

An architecture for agile shop floor control systems

Langer, G. & Alting, L., 2000, In : Journal of Manufacturing Engineering. 19, 4, p. 267-281

Research output: Contribution to journalJournal articleResearchpeer-review

Design of a Holonic Shop Floor Control system for a steel plate milling-cell

Langer, G., Schnell, J., Sørensen, C. & Alting, L., 2000, proceedings of the 2000 International CIRP Design Seminar. Haifa, Israel

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearch

Fabrication of Microcomponents by Electrochemical Manufacturing: Advanced Feed-Through Metallisation on Silicon and Nickel Micromechanical Resonators

Tang, P. T., Heschel, M., Ravnkilde, J. T., Hansen, O., Møller, P. & Alting, L., 2000, 1st euspen topical conference on Fabrication and Metrology in Nanotechnology. IPL

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Life cycle management and assessment: approaches and visions towards sustainable manufacturing

Westkämper, E., Alting, L. & Arndt, G., 2000, CIRP Annals 2000: Manufacturing Technology. Vol. 49/2/2000. p. 501-522

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

1999
1761 Downloads (Pure)

Danish experience with the EDIP tool for environmental design of industrial products

Wenzel, H. & Alting, L., 1999, EcoDesign '99: First International Symposium On Environmentally Conscious Design and Inverse Manufacturing, 1999. Proceedings.. IEEE

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File

Danish Experimence with the EDIP Tool for Environmental Design of Industrial Products

Wenzel, H. & Alting, L., 1999, Danish Experimence with the EDIP Tool for Environmental Design of Industrial Products.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearch

Environmental Design of Industrial Products (EDIP), anchoring of the life cycle concept in industry and society

Alting, L., Wenzel, H. & Hauschild, M. Z., 1999, Life Cycle Engineering, The Next Millenium. Kingston, Ontario, Canada: Queen's University, p. 370-379

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Life Cycle Design - a Route to the Sustainable Industrial Culture?

Hauschild, M. Z., Wenzel, H. & Alting, L., 1999, In : C I R P Annals. 1, 1, p. 393-396

Research output: Contribution to journalJournal articleResearchpeer-review

1998

Der Fachbereich Fertigungstechnik der Zukunft

Alting, L., 1998, Der Fachbereich Fertigungstechnik der Zukunft.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Developing a System Architecture for Holonic Shop Floor Control

Sørensen, C., Langer, G. & Alting, L., 1998, Proceedings of the 5th IFAC Workshop on Intelligent Manufacturing Systems 1998. Elsevier

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Developing A System Architecture For Holonic Shop Floor Control

Sørensen, C., Langer, G. & Alting, L., 1998, Proceedings of IFAC IMS'98, Brasil. Gramado, Brazil

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Elements in a new sustainable industrial culture - Environmental assessment in product development

Alting, L., Hauschild, M. Z. & Wenzel, H., 1998, In : Robotics and Computer-Integrated Manufacturing. 14, 5-6, p. 429-439

Research output: Contribution to journalJournal articleResearchpeer-review

Elements in a new sustainable industrial culture - Environmental assessment in product development

Alting, L., Wenzel, H. & Hauschild, M. Z., 1998, Proceedings - Life Cycle Design '98. Stockholm: Kungl. Tekniska Högskolan

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Industrial ecology starting with the product perspective: experience at the Technical University of Denmark

Hauschild, M. Z. & Alting, L., 1998, Industrial ecology and curriculum, Proceedings of the 3rd Industrial Ecology Seminar and Workshop. Trondheim: NTVA, p. 89-102

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

New Concepts and methods for developing shop floor control systems

Lynggaard, H. J., Bilberg, A. & Alting, L., 1998, In : C I R P Annals. p. 377-380

Research output: Contribution to journalJournal articleResearchpeer-review

Practical Aspects of CALS in Design and Manufacturing of Sheet Metal Products

Shpitalni, M., Alting, L. & Bilberg, A., 1998, In : C I R P Annals. 47/1/98, p. 393-396

Research output: Contribution to journalJournal articleResearchpeer-review

The Manufacturing Engineering Department of the Future

Alting, L., 1998, The Manufacturing Engineering Department of the Future.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

1997

Development of tools for life cycle environmental management in the packaging company of Hartmann Ltd., Denmark

Pedersen, C. S., Jørgensen, J., Alting, L., Wenzel, H. & Mortensen, A. L., 1997, Industry and the Environment - Practical Applications of Environmental Management Approaches in Business.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearch

Elements in a new sustainable industrial culture - Environmental assessment in product development

Alting, L., Hauschild, M. Z. & Wenzel, H., 1997, Elements in a new sustainable industrial culture - Environmental assessment in product development.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Elements in a new sustainable industrial culture - Environmental assessment in product development

Alting, L., Hauschild, M. Z. & Wenzel, H., 1997, 1st International Conference on Managing Enterprises - Stakeholders, Engineering, Logistics, and Achievement (ME-SELA 97): Conference Theme: Sustainable Manufacturing for Global Business. Mechanical Engineering Publications Limited, p. 523-531

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Engineering models and methods for industrial cell control

Lynggaard, H. J. B. & Alting, L., 1997, Engineering models and methods for industrial cell control.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review