• Produktionstorvet, 425, 228

    2800 Kgs. Lyngby

    Denmark

1991 …2023

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference article
2020

Mechanical properties of additively manufactured die with numerical analysis in extrusion process

Davoudinejad, A., Bayat, M., Larsen, A., Pedersen, D. B., Hattel, J. H. & Tosello, G., 2020, In : A I P Conference Proceedings Series. 2205, 1, 5 p., 020006 .

Research output: Contribution to journalConference articleResearchpeer-review

2019
23 Downloads (Pure)

Simulation of resin-impregnation, heat-transfer and cure in a resin-injection pultrusion process

Sandberg, M., Rasmussen, F. S., Hattel, J. H. & Spangenberg, J., 2019, In : AIP Conference Proceedings. 2113, 1, 7 p., 020022.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
101 Downloads (Pure)
2018

Accurate measurements in a production environment using dynamic length metrology (DLM)

Chiffre, L. D., González-Madruga, D., Costa, G. D., Sonne, M. R., Mohammadi, A., Hattel, J. H., Hansen, H. N., Mohaghegh, K., Meftahpour, M., Meinertz, J. & Meinertz, C., 2018, In : Procedia CIRP. 75, p. 343-348

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
275 Downloads (Pure)

Compensation of in-line metrology of polymer parts based on 3D thermomechanical analyses

Sonne, M. R., Costa, G. D., Madruga, D. G., Chiffre, L. D. & Hattel, J. H., 2018, In : Procedia CIRP. 75, p. 349-354

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
147 Downloads (Pure)

Revisiting models for spheroidal graphite growth

Bjerre, M. K., Azeem, M., Lee, P. D., Hattel, J. H. & Tiedje, N. S., 2018, In : Materials Science Forum. 925, p. 118-124

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
168 Downloads (Pure)

Thermo-fluid-metallurgical modelling of the selective laser melting process chain

De Baere, D., Bayat, M., Mohanty, S. & Hattel, J., 2018, In : Procedia CIRP. 74, p. 87-91

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
142 Downloads (Pure)
2017

Numerical Simulations of Planar Extrusion and Fused Filament Fabrication of Non-Newtonian Fluids

Comminal, R. B., Hattel, J. H. & Spangenberg, J., 2017, In : Nordic Rheology Society Annual Transactions. 25, p. 263-270

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
289 Downloads (Pure)
2016

An analytical solution describing the shape of a yield stress material subjected to an overpressure

Hovad, E., Spangenberg, J., Larsen, P., Thorborg, J. & Hattel, J. H., 2016, In : A I P Conference Proceedings Series. 1738, 5 p., 030049.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
146 Downloads (Pure)

Effect of Geometry in Frequency Response Modeling of Nanomechanical Resonators

Esfahania, M. N., Yilmaz, M., Sonne, M. R., Hattel, J. H. & Alaca, B. E., 2016, In : Aip Conference Proceedings. 1738, 4 p., 030044.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
121 Downloads (Pure)

Estimation of Water Diffusion Coefficient into Polycarbonate at Different Temperatures Using Numerical Simulation

Shojaee Nasirabadi, P., Jabbaribehnam, M. & Hattel, J. H., 2016, In : A I P Conference Proceedings Series. 1738, 4 p., 030045.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
688 Downloads (Pure)

Improvement in Surface Characterisitcs of Polymers for Subsequent Electroless Plating Using Liquid Assisted Laser Processing

Marla, D., Zhang, Y., Jabbaribehnam, M., Sonne, M. R., Spangenberg, J. & Hattel, J. H., 2016, In : Physics Procedia. 83, p. 211-217

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
355 Downloads (Pure)

Modelling the deformation of nickel foil during manufacturing of nanostructures on injection moulding tool inserts

Sonne, M. R., Cech, J., Pranov, H., Kofod, G., Garnæs, J., Lam, Y. C., Hattel, J. H. & Taboryski, R. J., 2016, In : A I P Conference Proceedings Series. 1769, 6 p., 090003.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
170 Downloads (Pure)

Moisture ingress into electronics enclosures under isothermal conditions

Staliulionis, Z., Jabbaribehnam, M. & Hattel, J. H., 2016, In : A I P Conference Proceedings Series. 1738, 5 p., 030041.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
282 Downloads (Pure)

Numerical modelling of evaporation in a ceramic layer in the tape casting process

Jabbaribehnam, M., Jambhekar, V. A., Hattel, J. H. & Helmig, R., 2016, In : A I P Conference Proceedings Series. 1738, 5 p., 030040.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
288 Downloads (Pure)

Numerical modelling of the flow in the resin infusion process on the REV scale: A feasibility study

Jabbaribehnam, M., Jambhekar, V. A., Gersborg, A. R., Spangenberg, J., Hattel, J. H. & Helmig, R., 2016, In : A I P Conference Proceedings Series. 1738, 030051.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
246 Downloads (Pure)

Numerical Simulation of Transient Moisture Transfer into an Electronic Enclosure

Shojaee Nasirabadi, P., Jabbaribehnam, M. & Hattel, J. H., 2016, In : A I P Conference Proceedings Series. 1738, 4 p., 030038.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
280 Downloads (Pure)
2015

A new numerical framework to simulate viscoelastic free-surface flows with the finite-volume method

Comminal, R., Spangenberg, J. & Hattel, J. H., 2015, In : Journal of Physics: Conference Series (Online). 602, 6 p., 012022.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
229 Downloads (Pure)

Comparison of residual stresses in sand- and chill casting of ductile cast iron wind turbine main shafts

Sonne, M. R., Frandsen, J. O. & Hattel, J. H., 2015, In : I O P Conference Series: Materials Science and Engineering. 84, 10 p., 012025.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
343 Downloads (Pure)

Flow Dynamics of green sand in the DISAMATIC moulding process using Discrete element method (DEM)

Hovad, E., Larsen, P., Walther, J. H., Thorborg, J. & Hattel, J. H., 2015, In : I O P Conference Series: Materials Science and Engineering. 84, 9 p., 012023.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
650 Downloads (Pure)

Integrated FEM-DBEM simulation of crack propagation in AA2024-T3 FSW butt joints considering manufacturing effects

Sonne, M. R., Carlone, P., Citarella, R. & Hattel, J. H., 2015, In : Key Engineering Materials. 651-653, p. 877-882

Research output: Contribution to journalConference articleResearchpeer-review

Modeling of damage in ductile cast iron – The effect of including plasticity in the graphite noduless

Andriollo, T., Thorborg, J., Tiedje, N. S. & Hattel, J. H., 2015, In : I O P Conference Series: Materials Science and Engineering. 84, 9 p., 012027.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
400 Downloads (Pure)

Modelling the solidification of ductile cast iron parts with varying wall thicknesses

Bjerre, M. K., Tiedje, N. S., Thorborg, J. & Hattel, J. H., 2015, In : I O P Conference Series: Materials Science and Engineering. 84, 9 p., 012038.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
221 Downloads (Pure)

Numerical modelling of damage evolution in ingot forging

Christiansen, P., Martins, P. A. F., Bay, N. O. & Hattel, J. H., 2015, In : Key Engineering Materials. 651-653, p. 237-242

Research output: Contribution to journalConference articleResearchpeer-review

Outcomes of the DeepWind Conceptual Design

Schmidt Paulsen, U., Borg, M., Aagaard Madsen, H., Friis Pedersen, T., Hattel, J. H., Ritchie, E., Ferreira, C. S., Svendsen, H. G., Berthelsen, P. A. & Smadja, C., 2015, In : Energy Procedia. 80, p. 329-341

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
268 Downloads (Pure)
2014

Analysis of Cavity Pressure and Warpage of Polyoxymethylene Thin Walled Injection Molded Parts: Experiments and Simulations

Guerrier, P., Tosello, G. & Hattel, J. H., 2014, In : A I P Conference Proceedings Series. 1664, 5 p., 110006.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
804 Downloads (Pure)

A Two-Phase Flow Solver for Incompressible Viscous Fluids, Using a Pure Streamfunction Formulation and the Volume of Fluid Technique

Comminal, R., Spangenberg, J. & Hattel, J. H., 2014, In : Defect and Diffusion Forum. 348, p. 9-19

Research output: Contribution to journalConference articleResearchpeer-review

DeepWind - from Idea to 5 MW Concept

Schmidt Paulsen, U., Aagaard Madsen, H., Kragh, K. A., Nielsen, P. H., Baran, I., Hattel, J. H., Ritchie, E., Leban, K., Svendsen, H. & Berthelsen, P. A., 2014, In : Energy Procedia. 53, p. 23-33 11 p.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
228 Downloads (Pure)

Multi-objective optimization of die geometry in ingot forging

Christiansen, P., Martins, P. A. F., Bay, N. & Hattel, J. H., 2014, In : Procedia Engineering. 81, p. 2457–2462

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
262 Downloads (Pure)

Numerical Model based Reliability Estimation of Selective Laser Melting Process

Mohanty, S. & Hattel, J. H., 2014, In : Physics Procedia. 56, p. 379-389 11 p.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
397 Downloads (Pure)
2013

3D thermo-chemical-mechanical analysis of the pultrusion process

Baran, I., Hattel, J. H. & Tutum, C. C., 2013, In : Proceedings of the Risø International Symposium on Materials Science. 34, p. 169-176

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
230 Downloads (Pure)

Design Optimization of a 5 MW Floating Offshore Vertical-axis Wind Turbine

Schmidt Paulsen, U., Aagaard Madsen, H., Hattel, J. H., Baran, I. & Nielsen, P. H., 2013, In : Energy Procedia. 35, p. 22-32

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
649 Downloads (Pure)

Interface Behavior in Functionally Graded Ceramics for the Magnetic Refrigeration: Numerical Modeling

Jabbari, M., Spangenberg, J. & Hattel, J. H., 2013, In : Applied Mechanics and Materials. 325-326, p. 1362-1367

Research output: Contribution to journalConference articleResearchpeer-review

Modelling Eutectic Growth in Unmodified and Modified Near-Eutectic Al-Si Alloy

Tiedje, N. S., Hattel, J. H., Taylor, J. A. & Easton, M. A., 2013, In : Materials Science Forum. 765, p. 160-164 5 p.

Research output: Contribution to journalConference articleResearchpeer-review

Numerical and semi-analytical modelling of the process induced distortions in pultrusion

Baran, I., Carlone, P., Hattel, J. H. & Palazzo, G. S., 2013, In : Proceedings of the Risø International Symposium on Materials Science. 34, p. 161-168

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
86 Downloads (Pure)

Open die forging of large shafts with porosity defects – physical and numerical modelling

Christiansen, P., Hattel, J. H., Bay, N., Alves, L. M. & Martins, P. A. F., 2013, In : Key Engineering Materials. 554-557, p. 2145-2155

Research output: Contribution to journalConference articleResearchpeer-review

1 Downloads (Pure)

The Internal Stress Evaluation of Pultruded Blades for a Darrieus Wind Turbine

Baran, I., Tutum, C. C. & Hattel, J. H., 2013, In : Key Engineering Materials. 554-557, p. 2127-2137

Research output: Contribution to journalConference articleResearchpeer-review

Utilizing multiple objectives for the optimization of the pultrusion process based on a thermo-chemical simulation

Tutum, C. C., Baran, I. & Hattel, J. H., 2013, In : Key Engineering Materials. 554-557, p. 2165-2174

Research output: Contribution to journalConference articleResearchpeer-review

2012

1st DeepWind 5 MW Baseline design

Schmidt Paulsen, U., Vita, L., Aagaard Madsen, H., Hattel, J. H., Ritchie, E., Leban, K. M., Berthelsen, P. A. & Carstensen, S., 2012, In : Energy Procedia. 24, p. 27-35

Research output: Contribution to journalConference articleResearchpeer-review

2011

Hybrid Search for Faster Production and Safer Process Conditions in Friction Stir Welding

Tutum, C. C., Deb, K. & Hattel, J. H., 2011, In : Lecture Notes in Computer Science. 6457, p. 603-612

Research output: Contribution to journalConference articleResearchpeer-review

Numerical Modeling of Fluid Flow in the Tape Casting Process

Jabbari, M. & Hattel, J. H., 2011, In : AIP Conference Proceedings - American Institute of Physics. 1389, 1, p. 143-146

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
243 Downloads (Pure)
2009

Optimization of friction stir welding using space mapping and manifold mapping-an initial study of thermal aspects

Larsen, A. A., Bendsøe, M. P., Hattel, J. H. & Schmidt, H. N. B., 2009, In : Structural and Multidisciplinary Optimization. 38, 3, p. 289-299

Research output: Contribution to journalConference articleResearchpeer-review

2008

Development of high melting point, environmentally friendly solders, using the calphad approach

Chidambaram, V., Hald, J. & Hattel, J. H., 2008, In : Archives of Metallurgy and Materials. 53, 4, p. 1111-1118

Research output: Contribution to journalConference articleResearchpeer-review

2006

Modelling the influence of the gas to melt ratio on the fraction solid of the surface in spray formed billets

Hattel, J. H. & Pryds, N., 2006, In : Simulation Modelling Practice and Theory. 14, 8, p. 1087-1099

Research output: Contribution to journalConference articleResearchpeer-review

2004

An integrated numerical model for the prediction of Gaussian and billet shapes

Hattel, J., Pryds, N. & Pedersen, T. B., Oct 2004, In : Materials Science and Engineering: A - Structural Materials: Properties, Microstructure and Processing. 383, 1, p. 184-189

Research output: Contribution to journalConference articleResearchpeer-review

Heat source models in simulation of heat flow in friction stir welding

Schmidt, H. N. B. & Hattel, J., 2004, In : International Journal of Offshore and Polar Engineering. 14, 4, p. 296-304

Research output: Contribution to journalConference articleResearchpeer-review