• Produktionstorvet, 425, 228

    2800 Kgs. Lyngby

    Denmark

1991 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Journal article
2020

Characterization of channels made by laser powder bed fusion and binder jetting using X-ray CT and image analysis

Dahmen, T., Klingaa, C. G., Baier-Stegmaier, S., Lapina, A., Pedersen, D. B. & Hattel, J. H., 2020, In : Additive Manufacturing. 36, 17 p., 101445.

Research output: Contribution to journalJournal articleResearchpeer-review

Distance map based micromechanical analysis of the impact of matrix heterogeneities on the yield stress of nodular cast iron

Andriollo, T., Tiedje, N. & Hattel, J., 2020, In : Mechanics of Materials. 148, 10 p., 103414.

Research output: Contribution to journalJournal articleResearchpeer-review

Impact of local Si segregation on strain localization in ductile cast iron: Paper

Xu, C. L., Andriollo, T., Lin, F., Zhang, Y. B., Hattel, J. & Tiedje, N., 2020, In : I O P Conference Series: Materials Science and Engineering. 861, 1, 5 p., 012038.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
18 Downloads (Pure)

Micromechanical impact of solidification regions in ductile iron revealed via a 3D strain partitioning analysis method

Xu, C. L., Andriollo, T., Zhang, Y. B., Hernando, J. C., Hattel, J. & Tiedje, N., 2020, In : Scripta Materialia. 178, p. 463 - 467

Research output: Contribution to journalJournal articleResearchpeer-review

Microstructural modelling of above β-transus heat treatment of additively manufactured Ti-6Al-4V using cellular automata

De Baere, D., Mohanty, S. & Hattel, J. H., 2020, In : Materials Today Communications. 24, 12 p., 101031.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
44 Downloads (Pure)

Numerical investigation into the effect of different parameters on the geometrical precision in the laser-based powder bed fusion process Chain

Baere, D. D., Moshiri, M., Mohanty, S., Tosello, G. & Hattel, J. H., 2020, In : Applied Sciences. 10, 10, 19 p., 3414.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
13 Downloads (Pure)

On the drying process of molded pulp products: Experiments and numerical modelling

Didone, M., Mohanty, S., Hattel, J. H., Sonne, M. R., Fiordaliso, E. M., Checchi, A. & Tosello, G., 2020, (Accepted/In press) In : Drying Technology.

Research output: Contribution to journalJournal articleResearchpeer-review

Part-scale mechanical modelling of LPBF including microstructural evolution effects

De Baere, D., Bayat, M., Mohanty, S. & Hattel, J. H., 2020, In : I O P Conference Series: Materials Science and Engineering. 861, 1, 8 p., 012013 .

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
12 Downloads (Pure)

Permeability and compaction behaviour of air-texturised glass fibre rovings: A characterisation study

Sandberg, M., Kabachi, A., Volk, M., Salling, F. B., Ermanni, P., Hattel, J. H. & Spangenberg, J., 2020, (Accepted/In press) In : Journal of Composite Materials.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
18 Downloads (Pure)
2019

Application of a projection method for simulating flow of a shear-thinning fluid

Jabbari, M., McDonough, J., Mitsoulis, E. & Hattel, J. H., 2019, In : Fluids . 4, 3, 16 p., 124.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
87 Downloads (Pure)

Investigation of the elastoplastic and fracture behavior of solid materials considering microstructural anisotropy: A discrete element modeling study

He, Y., Zhang, J., Andriollo, T., Hattel, J. & Zhao, W., 2019, In : Computational Materials Science. 170, 17 p., 109164.

Research output: Contribution to journalJournal articleResearchpeer-review

Keyhole-induced porosities in Laser-based Powder Bed Fusion (L-PBF) of Ti6Al4V: High-fidelity modelling and experimental validation

Bayat, M., Thanki, A., Mohanty, S., Witvrouw, A., Yang, S., Thorborg, J., Skat Tiedje, N. & Hattel, J. H., 2019, In : Additive Manufacturing. 30, 18 p., 100835.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
174 Downloads (Pure)

Long term prediction of local climate inside an electronics enclosure

Shojaee Nasirabadi, P., Ghiaasiaan, S. M. & Hattel, J. H., 2019, In : International Journal of Heat and Mass Transfer. 137, p. 280-291

Research output: Contribution to journalJournal articleResearchpeer-review

Microstructure and residual elastic strain at graphite nodules in ductile cast iron analyzed by synchrotron X-ray microdiffraction

Zhang, Y. B., Andriollo, T., Fæster, S., Barabash, R., Xu, R., Tiedje, N., Thorborg, J., Hattel, J., Juul Jensen, D. & Hansen, N., 2019, In : Acta Materialia. 167, p. 221-230

Research output: Contribution to journalJournal articleResearchpeer-review

Simulation of liquid composite moulding using a finite volume scheme and the level-set method

Sandberg, M., Hattel, J. H. & Spangenberg, J., 2019, In : International Journal of Multiphase Flow. 118, p. 183-192

Research output: Contribution to journalJournal articleResearchpeer-review

2018

A 3D numerical study of humidity evolution and condensation risk on a printed circuit board (PCB) exposed to harsh ambient conditions

Shojaee Nasirabadi, P. & Hattel, J. H., 2018, In : Microelectronics Reliability. 83, p. 39-49

Research output: Contribution to journalJournal articleResearchpeer-review

A graphite nodule growth model validated by in situ synchrotron x-ray tomography

Bjerre, M. K., Azeem, M. A., Tiedje, N. S., Thorborg, J., Lee, P. D. & Hattel, J. H., 2018, In : Modelling and Simulation in Materials Science and Engineering. 26, 8, p. 085012 20 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
94 Downloads (Pure)

Analysis of Local Conditions on Graphite Growth and Shape During Solidification of Ductile Cast Iron

Tiedje, N. S., Bjerre, M. K., Azeem, M. A., Hattel, J. H. & Lee, P. D., 2018, In : Transactions of the Indian Institute of Metals. 71, 11, p. 2699-2705

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
40 Downloads (Pure)

A robustness analysis of the bonding process of joints in wind turbine blades

Spangenberg, J., Uzal, A., Nielsen, M. W. & Hattel, J. H., 2018, In : International Journal of Adhesion and Adhesives. 85, p. 281-285 17 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
13 Downloads (Pure)

A study of laser surface modification of polymers: A comparison in air and water

Marla, D., Andersen, S. A., Zhang, Y., Hattel, J. H. & Spangenberg, J., 2018, In : Journal of Manufacturing Processes. 32, p. 432-437

Research output: Contribution to journalJournal articleResearchpeer-review

Experimental investigation of tensile strength of friction stir welded butt joints on PMMA

Adibeig, M. R., Hassanifard, S., Vakili-Tahami, F. & Hattel, J. H., 2018, In : Materials Today Communications. 17, p. 238-245

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
58 Downloads (Pure)

Inline temperature compensation for dimensional metrology of polymer parts in a production environment based on 3D thermomechanical analysis

Sonne, M. R., Gonzalez, D., Costa, G. D., De Chiffre, L., Mohammadi, A. & Hattel, J. H., 2018, In : Precision Engineering. p. 46-53

Research output: Contribution to journalJournal articleResearchpeer-review

Modeling of Moisture Transport into an Electronic Enclosure Using the Resistor-Capacitor Approach

Staliulionis, Z., Conseil-Gudla, H., Mohanty, S., Jabbari, M., Ambat, R. & Hattel, J. H., 2018, In : Journal of Electronic Packaging. 140, 3, 11 p., 031001 .

Research output: Contribution to journalJournal articleResearchpeer-review

Modeling of nanosecond pulsed laser processing of polymers in air and water

Marla, D., Zhang, Y., Hattel, J. H. & Spangenberg, J., 2018, In : Modelling and Simulation in Materials Science and Engineering. 26, 5, 21 p., 055005.

Research output: Contribution to journalJournal articleResearchpeer-review

1 Downloads (Pure)

Multiphysics modelling of manufacturing processes: A review

Jabbari, M., Baran, I., Mohanty, S., Comminal, R., Sonne, M. R., Nielsen, M. W., Spangenberg, J. & Hattel, J. H., 2018, In : Advances in Mechanical Engineering. 10, 5, p. 1-31

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
182 Downloads (Pure)

Numerical simulation of the planar extrudate swell of pseudoplastic and viscoelastic fluids with the streamfunction and the VOF methods

Comminal, R., Pimenta, F., Hattel, J. H., Alves, M. A. & Spangenberg, J., 2018, In : Journal of Non-Newtonian Fluid Mechanics. 252, p. 1–18

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
509 Downloads (Pure)

Predicting the reference length of polymer parts with micrometer uncertainty measured under non-reference conditions

Mohammadi, A., Sonne, M. R., Dalla Costa, G., González-Madruga, D., De Chiffre, L. & Hattel, J. H., 2018, In : Precision Engineering. 54, p. 344-352

Research output: Contribution to journalJournal articleResearchpeer-review

Residual Stresses around Individual Graphite Nodules in Ductile Iron: Impact on the Tensile Mechanical Properties

Andriollo, T., Thorborg, J., Tiedje, N. S. & Hattel, J. H., 2018, In : Materials Science Forum. 925, p. 465-472

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
338 Downloads (Pure)

Thermomechanical Modelling of Direct-Drive Friction Welding Applying a Thermal Pseudo Mechanical Model for the Generation of Heat

Sonne, M. R. & Hattel, J. H., 2018, In : Key Engineering Materials. 767, p. 343-350

Research output: Contribution to journalJournal articleResearchpeer-review

96 Downloads (Pure)
2017

A methodology for online visualization of the energy flow in a machine tool

Mohammadi, A., Züst, S., Mayr, J., Blaser, P., Sonne, M. R., Hattel, J. H. & Wegener, K., 2017, In : CIRP Journal of Manufacturing Science and Technology. 19, p. 138-146

Research output: Contribution to journalJournal articleResearchpeer-review

276 Downloads (Pure)

Assessment of the Contour Method for 2-D Cross Sectional Residual Stress Measurements of Friction Stir Welded Parts of AA2024-T3—Numerical and Experimental Comparison

Sonne, M. R., Carlone, P. & Hattel, J. H., 2017, In : Metals. 7, 11, 12 p., 508.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
213 Downloads (Pure)

Cavity prediction in sand mould production applying the DISAMATIC process

Hovad, E., Larsen, P., Spangenberg, J., Walther, J. H., Thorborg, J. & Hattel, J. H., 2017, In : Powder Technology. 321, p. 204-217

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
144 Downloads (Pure)

CFD simulation and statistical analysis of moisture transfer into an electronic enclosure

Shojaee Nasirabadi, P., Jabbaribehnam, M. & Hattel, J. H., 2017, In : Applied Mathematical Modelling. 44, p. 246–260

Research output: Contribution to journalJournal articleResearchpeer-review

Drying of a tape-cast layer: Numerical investigation of influencing parameters

Jabbaribehnam, M., Shojaee Nasirabadi, P., Jambhekar, V. A., Hattel, J. H. & Helmig, R., 2017, In : International Journal of Heat and Mass Transfer. 108, p. 2229-2238

Research output: Contribution to journalJournal articleResearchpeer-review

Flow visualization and simulation of the filling process during injection molding

Guerrier, P., Tosello, G. & Hattel, J. H., 2017, In : C I R P - Journal of Manufacturing Science and Technology. 16, p. 12–20

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
600 Downloads (Pure)

Hot-blade cutting of EPS foam for double-curved surfaces—numerical simulation and experiments

Petkov, K. P. & Hattel, J. H., 2017, In : International Journal of Advanced Manufacturing Technology. 93, 9-12, p. 4253-4264

Research output: Contribution to journalJournal articleResearchpeer-review

Humidity Buildup in Electronic Enclosures Exposed to Constant Conditions

Conseil, H., Staliulionis, Z., Jellesen, M. S., Jabbaribehnam, M., Hattel, J. H. & Ambat, R., 2017, In : I E E E Transactions on Components, Packaging and Manufacturing Technology. 7, 3, p. 412 - 423

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
287 Downloads (Pure)

Mathematical modelling of moisture transport into an electronic enclosure under non-isothermal conditions

Staliulionis, Ž., Mohanty, S., Jabbari, M. & Hattel, J. H., 2017, In : Microelectronics Reliability. 79, p. 526-532

Research output: Contribution to journalJournal articleResearchpeer-review

Modelling the effect of coating on the stresses and microstructure evolution in chill casting of wind turbine main shafts

Sonne, M. R., Thorborg, J. & Hattel, J. H., 2017, In : Wind Energy. 20, 9, p. 1635-1643 9 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Selecting the optimum engineering model for the frequency response of fcc nanowire resonators

Nasr Esfahani, M., Yilmaz, M., Sonne, M. R., Hattel, J. H. & Alaca, B. E., 2017, In : Applied Mathematical Modelling. 44, p. 236–245

Research output: Contribution to journalJournal articleResearchpeer-review