• Produktionstorvet, 425, 228

    2800 Kgs. Lyngby

    Denmark

1991 …2023
If you made any changes in Pure these will be visible here soon.

Research Output 1991 2020

2020

Mechanical properties of additively manufactured die with numerical analysis in extrusion process

Davoudinejad, A., Bayat, M., Larsen, A., Pedersen, D. B., Hattel, J. H. & Tosello, G., 2020, In : A I P Conference Proceedings Series. 2205, 1, 5 p., 020006 .

Research output: Contribution to journalConference articleResearchpeer-review

Micromechanical impact of solidification regions in ductile iron revealed via a 3D strain partitioning analysis method

Xu, C. L., Andriollo, T., Zhang, Y. B., Hernando, J. C., Hattel, J. & Tiedje, N., 2020, In : Scripta Materialia. 178, p. 463 - 467

Research output: Contribution to journalJournal articleResearchpeer-review

2019
75 Downloads (Pure)

A Characterization Study Relating Cross-Sectional Distribution of Fiber Volume Fraction and Permeability

Rasmussen, F. S., Sonne, M. R., Larsen, M., Mikkelsen, L. P. & Hattel, J. H., 2019, Proceedings of 22nd International Conference on Composite Materials. 7 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
44 Downloads (Pure)

Application of a projection method for simulating flow of a shear-thinning fluid

Jabbari, M., McDonough, J., Mitsoulis, E. & Hattel, J. H., 2019, In : Fluids . 4, 3, 16 p., 124.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
34 Downloads (Pure)

Build orientation effects on the roughness of SLM channels

Klingaa, C. G., Dahmen, T., Baier, S., Mohanty, S. & Hattel, J. H., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 111-114

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
87 Downloads (Pure)

Exhaust Valve Spindles for Marine Diesel Engines Manufactured by Hot Isostatic Pressing

Lapina, A., Hoeg, H. A., Knudsen, J., Berglund, T., Møller, R. & Hattel, J. H., 2019, Materials Research Proceedings. Dayal, P. & Triani, G. (eds.). Materials Research Forum LLC, Vol. 10. p. 98-106 (Materials Research Proceedings, Vol. 10).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
63 Downloads (Pure)

Fiber segmentation from 3D X-ray computed tomography of composites with continuous textured glass fibre yarns

Rasmussen, F. S., Emerson, M. J., Sonne, M. R., Hattel, J. H., Mikkelsen, L. P. & Dahl, V. A., 2019, Proceedings of 2019 International Conference on Tomography of Materials & Structures. 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File

Investigation of the elastoplastic and fracture behavior of solid materials considering microstructural anisotropy: A discrete element modeling study

He, Y., Zhang, J., Andriollo, T., Hattel, J. & Zhao, W., 2019, In : Computational Materials Science. 170, 17 p., 109164.

Research output: Contribution to journalJournal articleResearchpeer-review

65 Downloads (Pure)

Keyhole-induced porosities in Laser-based Powder Bed Fusion (L-PBF) of Ti6Al4V: High-fidelity modelling and experimental validation

Bayat, M., Thanki, A., Mohanty, S., Witvrouw, A., Yang, S., Thorborg, J., Skat Tiedje, N. & Hattel, J. H., 2019, In : Additive Manufacturing. 30, 18 p., 100835.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

Long term prediction of local climate inside an electronics enclosure

Shojaee Nasirabadi, P., Ghiaasiaan, S. M. & Hattel, J. H., 2019, In : International Journal of Heat and Mass Transfer. 137, p. 280-291

Research output: Contribution to journalJournal articleResearchpeer-review

17 Downloads (Pure)

Methodology for geometric characterization and dimensioning of additively manufactured channels

Dahmen, T., Klingaa, C. G., Baier, S., Pedersen, D. B. & Hattel, J. H., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 133-136

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File

Microstructure and residual elastic strain at graphite nodules in ductile cast iron analyzed by synchrotron X-ray microdiffraction

Zhang, Y. B., Andriollo, T., Fæster, S., Barabash, R., Xu, R., Tiedje, N., Thorborg, J., Hattel, J., Juul Jensen, D. & Hansen, N., 2019, In : Acta Materialia. 167, p. 221-230

Research output: Contribution to journalJournal articleResearchpeer-review

On the drying process of molded pulp products: Experiments and numerical modelling

Didone, M., Mohanty, S., Hattel, J. H., Sonne, M. R., Fiordaliso, E. M., Checchi, A. & Tosello, G., 2019, (Accepted/In press) In : Drying Technology.

Research output: Contribution to journalJournal articleResearchpeer-review

Resistor-capacitor approach for modelling of temperature and humidity response inside electronic enclosures

Staliulionis, Z., Mohanty, S. & Hattel, J. H., 2019, 2019 20th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE 2019). IEEE, 7 p. 8724538. (2019 20th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2019).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

86 Downloads (Pure)

Roughness Investigation of SLM Manufactured Conformal Cooling Channels Using X-ray Computed Tomography

Klingaa, C. G., Bjerre, M. K., Baier, S., De Chiffre, L., Mohanty, S. & Hattel, J. H., 2019, Proceedings of the 9th Conference on Industrial Computed Tomography, Padova, Italy (iCT 2019). 10 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File

Simulation of liquid composite moulding using a finite volume scheme and the level-set method

Sandberg, M., Hattel, J. H. & Spangenberg, J., 2019, In : International Journal of Multiphase Flow. 118, p. 183-192

Research output: Contribution to journalJournal articleResearchpeer-review

101 Downloads (Pure)

Simulation of resin-impregnation, heat-transfer and cure in a resin-injection pultrusion process

Sandberg, M., Rasmussen, F. S., Hattel, J. H. & Spangenberg, J., 2019, In : AIP Conference Proceedings. 2113, 1, 7 p., 020022.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File

The influence of shoe-floor contact area, load and velocity on dynamic friction in indoor sports footwear: a small-scale tribology study

Jakobsen, L., Lysdal, F. G., Grønlykke, T. B., Hattel, J. H. & Sivebaek, I. M., 2019, In : Footwear Science. 11, sup1, p. S61-S62

Research output: Contribution to journalConference abstract in journalResearchpeer-review

2018

A 3D numerical study of humidity evolution and condensation risk on a printed circuit board (PCB) exposed to harsh ambient conditions

Shojaee Nasirabadi, P. & Hattel, J. H., 2018, In : Microelectronics Reliability. 83, p. 39-49

Research output: Contribution to journalJournal articleResearchpeer-review

275 Downloads (Pure)

Accurate measurements in a production environment using dynamic length metrology (DLM)

Chiffre, L. D., González-Madruga, D., Costa, G. D., Sonne, M. R., Mohammadi, A., Hattel, J. H., Hansen, H. N., Mohaghegh, K., Meftahpour, M., Meinertz, J. & Meinertz, C., 2018, In : Procedia CIRP. 75, p. 343-348

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
38 Downloads (Pure)

A graphite nodule growth model validated by in situ synchrotron x-ray tomography

Bjerre, M. K., Azeem, M. A., Tiedje, N. S., Thorborg, J., Lee, P. D. & Hattel, J. H., 2018, In : Modelling and Simulation in Materials Science and Engineering. 26, 8, p. 085012 20 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
4 Downloads (Pure)

Analysis of Local Conditions on Graphite Growth and Shape During Solidification of Ductile Cast Iron

Tiedje, N. S., Bjerre, M. K., Azeem, M. A., Hattel, J. H. & Lee, P. D., 2018, In : Transactions of the Indian Institute of Metals. 71, 11, p. 2699-2705

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
18 Downloads (Pure)

Application of modelling tools for precise transfer of nanostructures from silicon wafers to steel injection moulding tool inserts

Sonne, M. R. & Hattel, J. H., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 59-60

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File

A robustness analysis of the bonding process of joints in wind turbine blades

Spangenberg, J., Uzal, A., Nielsen, M. W. & Hattel, J. H., 2018, In : International Journal of Adhesion and Adhesives. 85, p. 281-285 17 p.

Research output: Contribution to journalJournal articleResearchpeer-review

A study of laser surface modification of polymers: A comparison in air and water

Marla, D., Andersen, S. A., Zhang, Y., Hattel, J. H. & Spangenberg, J., 2018, In : Journal of Manufacturing Processes. 32, p. 432-437

Research output: Contribution to journalJournal articleResearchpeer-review

147 Downloads (Pure)

Compensation of in-line metrology of polymer parts based on 3D thermomechanical analyses

Sonne, M. R., Costa, G. D., Madruga, D. G., Chiffre, L. D. & Hattel, J. H., 2018, In : Procedia CIRP. 75, p. 349-354

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
29 Downloads (Pure)

Considerations on numerical modelling for compensation of in-process metrology in manufacturing

Sonne, M. R., Mohammadi, A., Dalla Costa, G., Madruga, D. G., De Chiffre, L. & Hattel, J. H., 2018, Proceedings of the 18th International Conference of the european Society for Precision Engineering and Nanotechnology . Billington, D. B., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 453-454

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File

Experimental investigation of tensile strength of friction stir welded butt joints on PMMA

Adibeig, M. R., Hassanifard, S., Vakili-Tahami, F. & Hattel, J. H., 2018, In : Materials Today Communications. 17, p. 238-245

Research output: Contribution to journalJournal articleResearchpeer-review

112 Downloads (Pure)

Grand Solutions - Augmented Cellular Meat Production (ACMP)

Sonne, M. R., Andriollo, T. & Hattel, J. H., 2018. 1 p.

Research output: Contribution to conferencePosterResearch

Open Access
File
Open Access
File

Inline temperature compensation for dimensional metrology of polymer parts in a production environment based on 3D thermomechanical analysis

Sonne, M. R., Gonzalez, D., Costa, G. D., De Chiffre, L., Mohammadi, A. & Hattel, J. H., 2018, In : Precision Engineering. p. 46-53

Research output: Contribution to journalJournal articleResearchpeer-review

146 Downloads (Pure)

Meso-Scale Process Modelling Strategies for Pultrusion of Unidirectional Profiles

Yuksel, O., Baran, I., Rasmussen, F. S., Spangenberg, J., Ersoy, N., Hattel, J. H. & Akkerman, R., 2018, 18th European Conference on Composite Materials (ECCM-18) . Applied Mechanics Laboratory, 8 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Modeling of Moisture Transport into an Electronic Enclosure Using the Resistor-Capacitor Approach

Staliulionis, Z., Conseil-Gudla, H., Mohanty, S., Jabbari, M., Ambat, R. & Hattel, J. H., 2018, In : Journal of Electronic Packaging. 140, 3, 11 p., 031001 .

Research output: Contribution to journalJournal articleResearchpeer-review

1 Downloads (Pure)

Modeling of nanosecond pulsed laser processing of polymers in air and water

Marla, D., Zhang, Y., Hattel, J. H. & Spangenberg, J., 2018, In : Modelling and Simulation in Materials Science and Engineering. 26, 5, 21 p., 055005.

Research output: Contribution to journalJournal articleResearchpeer-review

24 Downloads (Pure)

Modelling of the microstructural evolution of Ti6Al4V parts produced by selective laser melting during heat treatment

De Baere, D., Valente, E. H., Mohanty, S. & Hattel, J. H., 2018, Proceedings of the 18th International Conference of the european Society for Precision Engineering and Nanotechnology . Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 249-250

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
120 Downloads (Pure)

Modelling the Effect of Non-Uniform Fibre Distribution on the Curing Behaviour in Resin Injection Pultrusion

Rasmussen, F. S., Klingaa, C. G., Larsen, M., Sonne, M. R., Spangenberg, J. & Hattel, J. H., 2018, 18th European Conference on Composite Materials (ECCM-18) . Applied Mechanics Laboratory, 8 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

109 Downloads (Pure)

Multiphysics modelling of manufacturing processes: A review

Jabbari, M., Baran, I., Mohanty, S., Comminal, R., Sonne, M. R., Nielsen, M. W., Spangenberg, J. & Hattel, J. H., 2018, In : Advances in Mechanical Engineering. 10, 5, p. 1-31

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
117 Downloads (Pure)

Multi-Scale Multiphysics Simulation of Metal L-PBF AM Process and Subsequent Mechanical Analysis

Bayat, M., De Baere, D., Mohanty, S. & Hattel, J. H., 2018. 20 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
81 Downloads (Pure)

Numerical modelling and optimisation of fibre wet-out in resin-injection pultrusion processes

Sandberg, M., Hattel, J. H. & Spangenberg, J., 2018, 18th European Conference on Composite Materials (ECCM-18) . Applied Mechanics Laboratory, 8 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

68 Downloads (Pure)

Numerical modelling and parametric study of grain morphology and resultant mechanical properties from selective laser melting process of Ti6Al4V

Bayat, M., Mohanty, S. & Hattel, J. H., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 273-274

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
133 Downloads (Pure)

Numerical Modelling of Mechanical Anisotropy during Low Temperature Nitriding of Stainless Steel

Kücükyildiz, Ö. C., Sonne, M. R., Thorborg, J., Winther, G., Hattel, J. H. & Somers, M. A. J., 2018. 7 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
389 Downloads (Pure)

Numerical simulation of the planar extrudate swell of pseudoplastic and viscoelastic fluids with the streamfunction and the VOF methods

Comminal, R., Pimenta, F., Hattel, J. H., Alves, M. A. & Spangenberg, J., 2018, In : Journal of Non-Newtonian Fluid Mechanics. 252, p. 1–18

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File