Hans Nørgaard Hansen

Head of Department, Professor, PhD, Department of Mechanical Engineering

https://orcid.org/0000-0001-7829-6962

Phone25154913
Emailhnha@mek.dtu.dk
Websitehttp://www.mek.dtu.dk

Nils Koppels Allé, 404, 026
2800 Kgs. Lyngby
Denmark

Research output per year

If you made any changes in Pure these will be visible here soon.

16 results

Filter

2018
Assessment of sub-mm features replication capability in injection moulding using a multi-cavity tool produced by additive manufacturing
Davoudinejad, A., Charalambis, A., Zhang, Y., Calaon, M., Pedersen, D. B., Tosello, G. & Hansen, H. N., 2018. 1 p.
Research output: Contribution to conference › Poster › Research › peer-review

Open Access
File
141 Downloads (Pure)
Evaluation of part consistency with photopolymer inserts in different injection moulding process parameters
Davoudinejad, A., Charalambis, A., Zhang, Y., Calaon, M., Tosello, G. & Hansen, H. N., 2018. 2 p.
Research output: Contribution to conference › Poster › Research › peer-review

Open Access
File
83 Downloads (Pure)
2017
Investigation of process parameters influence on flash formation in injection moulding of polymer micro features through design of experiments
Eladl, A., Tosello, G., Mostafa, R., Soltan, H. & Hansen, H. N., 2017. 1 p.
Research output: Contribution to conference › Poster › Research › peer-review

Open Access
File
162 Downloads (Pure)
Replication quality assessment and uncertainty evaluation of a polymer precision injection moulded component
Baruffi, F., Calaon, M., Tosello, G., Hansen, H. N., Prantl, M. & Miller, N., 2017. 2 p.
Research output: Contribution to conference › Poster › Research › peer-review

Open Access
File
265 Downloads (Pure)
2016

Comparison of measurements from optical CMM and focus-variation microscope of a μPIM mechanical part
Quagliotti, D., Salaga, J., Tosello, G. & Hansen, H. N., 2016. 1 p.
Research output: Contribution to conference › Poster › Research › peer-review

Open Access
File

297 Downloads (Pure)
Metrology of sub-micron structured polymer surfaces
Quagliotti, D., Tosello, G., Salaga, J., Baruffi, F., Hansen, H. N. & Gasparin, S., 2016. 1 p.
Research output: Contribution to conference › Poster › Research › peer-review

Open Access
File

148 Downloads (Pure)
Performance verification of focus variation and confocal microscopes measuring tilted ultra-fine surfaces
Quagliotti, D., Baruffi, F., Tosello, G., Gasparin, S., Annoni, M., Parenti, P., Sobiecki, R. & Hansen, H. N., 2016. 1 p.
Research output: Contribution to conference › Poster › Research › peer-review

Open Access
File

539 Downloads (Pure)
2015
Optical micro-metrology of structured surfaces micro-machined by jet-ECM
Quagliotti, D., Tosello, G., Islam, A., Hansen, H. N., Zeidler, H., Martin, A., Schubert, A., Brandao, C. & Riemer, O., 2015. 1 p.
Research output: Contribution to conference › Poster › Research › peer-review

File
184 Downloads (Pure)
2013

Dimensional verification of high aspect ratio micro structures using FIB-SEM
Zhang, Y. & Hansen, H. N., 2013. 1 p.
Research output: Contribution to conference › Poster › Research

File

45 Downloads (Pure)
2008
Selective micro metallization of polymers for biomedical and medical application
Islam, M. A., Hansen, H. N. & Tang, P. T., 2008.
Research output: Contribution to conference › Poster › Research
Surface tension of polymer melts - experimental investigations of its effect on polymer-polymer adhesion
Jankova Atanasova, K., Islam, M. A., Hansen, H. N. & Tang, P. T., 2008.
Research output: Contribution to conference › Poster › Research › peer-review
2007

Developments in nanometrology at IPL
De Chiffre, L., Hansen, H. N., Bariani, P., Marinello, F., Horsewell, A., Savio, E. & Carli, L., 2007.
Research output: Contribution to conference › Poster › Research › peer-review
Factors influencing the polymer-polymer adhesion- strength during two shot moulding
Islam, M. A., Hansen, H. N. & Tang, P. T., 2007.
Research output: Contribution to conference › Poster › Research
Micro-and Nanostructured Surfaces for the Liquid and Gas Management in Microstructured Flowfields
Heckele, M., Worgull, M., Gavillet, J., Tosello, G., Metz, T., Koltay, P. & Hansen, H. N., 2007.
Research output: Contribution to conference › Poster › Research › peer-review
Surface tension of polymer melts - experimental investigations of its effects on polymer-polymer adhesion.
Islam, M. A., Jankova Atanasova, K., Hansen, H. N. & Tang, P. T., 2007.
Research output: Contribution to conference › Poster › Research
2006

The Danish Microfactory
Hansen, H. N., 2006.
Research output: Contribution to conference › Poster › Research

Search results