Hans Nørgaard Hansen

  • Nils Koppels Allé, 404, 026

    2800 Kgs. Lyngby

    Denmark

1994 …2021
If you made any changes in Pure these will be visible here soon.

Research Output 1996 2020

Filter
Conference abstract for conference
2017
41 Downloads (Pure)

Characterization of smearing patterns in ball nose end milling process

Biondani, F., Bissacco, G. & Hansen, H. N., 2017. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File

Effect of TWD estimation error on the depth of machined cavities in micro-EDM milling

Puthumana, G., Bissacco, G. & Hansen, H. N., 2017. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

58 Downloads (Pure)

Measurement noise of a point autofocus surface topography instrument

Feng, X., Quagliotti, D., Maculotti, G., P. Syam, W., Tosello, G., Hansen, H. N., Galetto, M. & Leach, R., 2017. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
2016
161 Downloads (Pure)

A simulation of the effect of TWD (tool wear per discharge) estimation error on the depth of machined surfaces in micro-EDM milling

Puthumana, G., Bissacco, G. & Hansen, H. N., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File
25 Downloads (Pure)

Comparison of cutting edge characterization techniques applied to industrial tools with sub micrometer edge radius

Biondani, F., Bissacco, G., Garnæs, J. & Hansen, H. N., 2016. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
119 Downloads (Pure)

Metrology of sub-micron structured polymer surfaces

Quagliotti, D., Tosello, G., Salaga, J., Baruffi, F., Hansen, H. N. & Gasparin, S., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
25 Downloads (Pure)

Objectives comparison in a confocal microscope using pseuso-random roughness artefacts

Quagliotti, D., Tosello, G. & Hansen, H. N., 2016. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
269 Downloads (Pure)

Rheology of High-Melt-Strength Polypropylene for Additive Manufacturing

Hofstätter, T., Kamleitner, F., Jagenteufel, R., Pedersen, D. B., Tosello, G. & Hansen, H. N., 2016. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
210 Downloads (Pure)

The effect of TWD estimation error on the geometry of machined surfaces in micro-EDM milling

Puthumana, G., Bissacco, G. & Hansen, H. N., 2016. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
101 Downloads (Pure)

Two process chains for creating functional surfaces on mold for 3D geometry

Zhang, Y., Hansen, H. N., Pedersen, D. B. & Tosello, G., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
2015
85 Downloads (Pure)

Effect of Functional Nano Channel Structures Different Widths on Injection Molding and Compression Molding Replication Capabilities

Calaon, M., Tosello, G., Garnaes, J. & Hansen, H. N., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
148 Downloads (Pure)

Electrochemical based processes enabling different replication steps for large area low cost surface nano structuring

Calaon, M., Hansen, H. N., Tosello, G., Garnaes, J., Tang, P. T. & Ravn, C., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
246 Downloads (Pure)

Gate design in injection molding of microfluidic components using process simulations

Marhöfer, D. M., Tosello, G., Islam, A. & Hansen, H. N., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
66 Downloads (Pure)

Micro injection moulding process validation for high precision manufacture of thermoplastic elastomer micro suspension rings

Calaon, M., Tosello, G., Elsborg Hansen, R. & Hansen, H. N., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
51 Downloads (Pure)

Replication fidelity assessment of polymer large area sub-μm structured surfaces using fast angular intensity distribution measurements.

Calaon, M., Hansen, H. N., Tosello, G., Weirich, J., Garnæs, J. & Tang, P. T., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
2014
130 Downloads (Pure)

Polymer Replication of a Randomly Nanostructured Insert with and without Induction Heating of the Mold

Menotti, S., Tang, P. T. & Hansen, H. N., 2014. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File

Replication of micro structured surface by injection moulding of PEEK

Zhang, Y., Hansen, H. N. & Sørensen, S., 2014.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

2013

Application of nanometrology to polymer production

Garnaes, J., Tanzi, S., Calaon, M., Cech, J., Taboryski, R. J., Hansen, H. N., Nørregaard, J., Madsen, M. H., Hansen, P-E., Sonne, M. R., Pranov, H., Kofod, G., Lam, Y. C., Hattel, J. H., Matteucci, M., Christiansen, T. L., Friis, S., Thylstrup Christensen, M., Li, W., Wilson, S. & 2 others, Kutchinsky, J. & Tosello, G., 2013. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

146 Downloads (Pure)

Improving the accuracy of micro injection moulding process simulations

Marhöfer, D. M., Tosello, G., Islam, A. & Hansen, H. N., 2013. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File

Surface replication assessment of sub-µm structures by atomic force microscopy

Calaon, M., Tosello, G., Tang, P. T., Nørregaard, J., Garnaes, J. & Hansen, H. N., 2013. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

2008

Characterization of nano-scale finished surfaces

Hansen, H. N. & De Chiffre, L., 2008.

Research output: Contribution to conferenceConference abstract for conferenceResearch

Establishment of traceability in measurement of micro components

Hansen, H. N., 2008.

Research output: Contribution to conferenceConference abstract for conferenceResearch

Micro Factory - design and realisation

Hansen, H. N., 2008.

Research output: Contribution to conferenceConference abstract for conferenceResearch

Quality control of micro objects

Hansen, H. N., 2008.

Research output: Contribution to conferenceConference abstract for conferenceResearch

2007

Pre-industrial aspects of microforming related to process, machine and tool

Arentoft, M. & Hansen, H. N., 2007.

Research output: Contribution to conferenceConference abstract for conferenceResearch

2006

Dimensional micro and nano metrology

Hansen, H. N., 2006.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Micromechanical systems design and manufacture

Hansen, H. N., 2006.

Research output: Contribution to conferenceConference abstract for conferenceResearch

Micro-production using Bits-out technologies

Hansen, H. N., 2006.

Research output: Contribution to conferenceConference abstract for conferenceResearch