Hans Nørgaard Hansen

  • Nils Koppels Allé, 404, 026

    2800 Kgs. Lyngby

    Denmark

1994 …2021
If you made any changes in Pure these will be visible here soon.

Research Output 1996 2020

Filter
Article in proceedings
2017

A perfomance assesment of a 2 axis scanning mirror galvanometer for powder bed fusion

Pedersen, D. B., Andersen, S. A., Nielsen, J. S., Eiríksson, E. R., Nielsen, J. B., Wilm, J., Aanæs, H. & Hansen, H. N., 2017, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE: Dimensional Accuracy and Surface Finish in Additive Manufacturing. The European Society for Precision Engineering and Nanotechnology, 3 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

333 Downloads (Pure)

Challenges and opportunities of fibre-reinforced polymers in additive manufacturing with focus on industrial applications

Hofstätter, T., Pedersen, D. B., Tosello, G. & Hansen, H. N., 2017, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE: Dimensional Accuracy and Surface Finish in Additive Manufacturing. The European Society for Precision Engineering and Nanotechnology, 4 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
1 Downloads (Pure)

Economic trade-offs of additive manufacturing integration in injection moulding process chain

Charalambis, A., Kerbache, L., Tosello, G., Pedersen, D. B., Mischkot, M. & Hansen, H. N., 2017, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE: Dimensional Accuracy and Surface Finish in Additive Manufacturing. The European Society for Precision Engineering and Nanotechnology, 4 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

86 Downloads (Pure)

Effects of carbon fibres on the life cycle assessment of additively manufactured injection moulding inserts for rapid prototyping

Hofstätter, T., Bey, N., Mischkot, M., Stotz, P. M., Pedersen, D. B., Tosello, G. & Hansen, H. N., 2017, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE: Dimensional Accuracy and Surface Finish in Additive Manufacturing. The European Society for Precision Engineering and Nanotechnology, 5 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File

Injection Moulding Pilot Production: Performance Assessment of Tooling Process Chains Based on Tool Inserts Made from Brass and A 3d Printed Photopolymer

Mischkot, M., Tosello, G., Nielsen, D. K. Y., Pedersen, D. B., Zhang, Y., Hofstätter, T., Herbin, L. & Hansen, H. N., 2017, Proceedings of ANTEC 2017. Society of Plastics Engineers, 5 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Inner centering in parting line area of injection mould using side locks

Mahshid, R. & Hansen, H. N., 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology. The European Society for Precision Engineering and Nanotechnology, 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

236 Downloads (Pure)

Integration of Fiber-Reinforced Polymers in a Life Cycle Assessment of Injection Molding Process Chains with Additive Manufacturing

Hofstätter, T., Bey, N., Mischkot, M., Stotz, P. M., Pedersen, D. B., Tosello, G. & Hansen, H. N., 2017, Industrializing Additive Manufacturing - Proceedings of Additive Manufacturing in Products and Applications - AMPA2017. Meboldt, M. & Klahn, C. (eds.). Springer, p. 287-295

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File

Large scale additive manufacturing of thermosetting material

Jensen, M. L., Pedersen, D. B., Tosello, G. & Hansen, H. N., 2017, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE: Dimensional Accuracy and Surface Finish in Additive Manufacturing. The European Society for Precision Engineering and Nanotechnology, 6 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

136 Downloads (Pure)

Performance Simulation and Verification of Vat Photopolymerization Based, Additively Manufactured Injection Molding Inserts with Micro-Features

Mischkot, M., Hofstätter, T., Michailidou, I., Herrán Chavarri, C., Lunzer, A., Tosello, G., Pedersen, D. B. & Hansen, H. N., 2017, Industrializing Additive Manufacturing - Proceedings of Additive Manufacturing in Products and Applications - AMPA2017. Meboldt, M. & Klahn, C. (eds.). Springer, p. 162-168

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File

Replication assessment of surface texture at sub-micrometre scale

Quagliotti, D., Tosello, G. & Hansen, H. N., 2017, Proceedings of the 32nd Annual Meeting of the American Society for Precision Engineering. American Society for Precision Engineering, 6 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

3 Downloads (Pure)

Replication quality assessment and uncertainty evaluation of a polymer precision injection moulded component

Baruffi, F., Calaon, M., Tosello, G., Hansen, H. N., Prantl, M. & Miller, N., 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology. The European Society for Precision Engineering and Nanotechnology, p. 495-496

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2016

Adaptive Layer Height During DLP Materials Processing

Pedersen, D. B., Zhang, Y., Nielsen, J. S. & Hansen, H. N., 2016, Proceedings of the 2nd International Conference on Progress in Additive Manufacturing. C. C. K., Y. W. Y., T. M. J. & L. E. J. (eds.). Research Publishing Services, p. 246-251

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

A Model of Parallel Kinematics for Machine Calibration

Pedersen, D. B., Bæk Nielsen, M., Kløve Christensen, S., Nielsen, J. S. & Hansen, H. N., 2016, Proceedings of the 2nd International Conference on Progress in Additive Manufacturing. Chua, C. K., Yeong, W. Y., Tan, M. J. & Liu, E. J. (eds.). Research Publishing Services, p. 507-512

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

A Self-Peeling Vat for Improved Release Capabilities During DLP Materials Processing

Pedersen, D. B., Zhang, Y., Nielsen, J. S. & Hansen, H. N., 2016, Proceedings of the 2nd International Conference on Progress in Additive Manufacturing. C. C. K., Y. W. Y., T. M. J. & L. E. J. (eds.). Research Publishing Services, p. 241-245

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

167 Downloads (Pure)

Comparison of conventional Injection Mould Inserts to Additively Manufactured Inserts using Life Cycle Assessment

Hofstätter, T., Bey, N., Mischkot, M., Lunzer, A., Pedersen, D. B. & Hansen, H. N., 2016, Proceedings of euspen’s 16th International Conference & Exhibition. 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
1 Downloads (Pure)

Comparison of measurements from optical CMM and focus-variation microscope of a μPIM mechanical part

Quagliotti, D., Salaga, J., Tosello, G. & Hansen, H. N., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

178 Downloads (Pure)

Correction of systematic behaviour in topographical surface analysis

Quagliotti, D., Baruffi, F., Tosello, G., Gasparin, S., Annoni, M., Parenti, P., Sobiecki, R. & Hansen, H. N., 2016, Proceedings of the 11th International Conference on Multi-Material Micro Manufacture (4M2016) : co-organised with 10th International Workshop on Microfactories (IWMF2016). Research Publishing Services, p. 277-280

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
445 Downloads (Pure)

Distribution and Orientation of Carbon Fibers in Polylactic Acid Parts Produced by Fused Deposition Modeling

Hofstätter, T., W. Gutmann, I., Koch, T., Pedersen, D. B., Tosello, G., Heinz, G. & Hansen, H. N., 2016, Proceedings of ASPE Summer Topical Meeting 2016: Dimensional Accuracy and Surface Finish in Additive Manufacturing. ASPE – The American Society for Precision Engineering, 6 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File

Dynamic Length Metrology (DLM) for measurements with sub-micrometre uncertainty in a production environment

De Chiffre, L., Hansen, H. N., Hattel, J. H., Madruga, D. G., Dalla Costa, G., Sonne, M. R. & Mohammadi, A., 2016, Proceedings of euspen’s 16th International Conference & Exhibition. 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

451 Downloads (Pure)

Evolution of Surface Texture and Cracks During Injection Molding of Fiber-Reinforced, Additively-Manufactured, Injection Molding Inserts

Hofstätter, T., Mischkot, M., Pedersen, D. B., Tosello, G. & Hansen, H. N., 2016, Proceedings of ASPE Summer Topical Meeting 2016: Dimensional Accuracy and Surface Finish in Additive Manufacturing. ASPE – The American Society for Precision Engineering, 38 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
1 Downloads (Pure)

Fast Mold Temperature Evolution on Micro Features Replication Quality during Injection Molding

Liparoti, S., Calaon, M., Speranza, V., Tosello, G., Pantani, R., Hansen, H. N. & Titomanlio, G., 2016, Proceedings of the 32nd International Conference of the Polymer Processing Society. 5 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

324 Downloads (Pure)

High accuracy and precision micro injection moulding of thermoplastic elastomers micro ring production

Calaon, M., Tosello, G., Elsborg, R. & Hansen, H. N., 2016, 4M/IWMF2016 Conference: Proceedings of 11th International Conference on Multi-Material Micro Manufacture. Research Publishing Services, p. 23-26

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

File
295 Downloads (Pure)

Influence of Process Temperatures on Blister Creation in Micro Film Insert Molding of a Dual Layer Membrane

Wöhner, T., R. Whiteside, B., Tosello, G., Hansen, H. N. & Islam, A., 2016, Proceedings of the 11th International Conference on Multi-Material Micro Manufacture (4M2016) : co-organised with 10th International Workshop on Microfactories (IWMF2016). Research Publishing Services, p. 51-54

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
412 Downloads (Pure)

Injection molding of micro pillars on vertical side walls using polyether-ether-ketone (PEEK)

Zhang, Y., Hansen, H. N. & Sørensen, S., 2016, Proceedings. 11th International Conference on Micro Manufacturing. Paper 16

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File

In-Situ Monitoring in Additive Manufacturing Using Contact Image Sensors

Pedersen, D. B., Eiríksson, E. R., Aanæs, H. & Hansen, H. N., 2016, Proceedings of the ASPE/euspen 2016 Summer Topical Meeting on Dimensional Accuracy and Surface Finish in Additive Manufacturing. ASPE – The American Society for Precision Engineering, p. 114-118

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

319 Downloads (Pure)

Investigation of digital light processing using fibre-reinforced polymers

Hofstätter, T., Pedersen, D. B., Nielsen, J. S., Mischkot, M. & Hansen, H. N., 2016, Proceedings of euspen’s 16th International Conference & Exhibition. 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File

Length determination on industrial polymer parts from measurement performed under transient temperature conditions

Dalla Costa, G., Madruga, D. G., De Chiffre, L. & Hansen, H. N., 2016, Proceedings of euspen’s 16th International Conference & Exhibition. 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

1 Downloads (Pure)

Performance verification of focus variation and confocal microscopes measuring tilted ultra-fine surfaces

Quagliotti, D., Baruffi, F., Tosello, G., Gasparin, S., Annoni, M., Parenti, P., Sobiecki, R. & Hansen, H. N., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

310 Downloads (Pure)

Shrinkage calibration method for μPIM manufactured parts

Quagliotti, D., Tosello, G., Salaga, J. & Hansen, H. N., 2016, Proceedings. 11th International Conference on Micro Manufacturing. 6 p. Paper 20

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File

The influence of cellular structures on flow stress of high strength components manufactured using SLM

Mahshid, R., Hansen, H. N. & Loft Højbjerre, K., 2016, Proceedings of euspen’s 16th International Conference & Exhibition. 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Towards in process control of polymer micro manufactured components

Calaon, M., Tosello, G., Hansen, H. N., Prantl, M., Dessors, S., Mueller, T., Scholz, S. G. & Miller, N., 2016, Euspen’s 16th International Conference & Exhibition. p. 455-456

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2015

A comparative study of metal and ceramic injection moulding for precision applications

Islam, A., Giannekas, N., Marhöfer, D. M., Tosello, G. & Hansen, H. N., 2015, Proceedings of the 4M/ICOMM2015 Conference. Annoni, M., Fassi, I., Wiens, G. J. & Dimov, S. (eds.). Research Publishing Services, p. 567-570

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

1 Downloads (Pure)

Additive manufacturing for the production of inserts for micro injection moulding

Mischkot, M., Hansen, H. N. & Pedersen, D. B., 2015, Proceedings of Euspen's 15th International Conference & Exhibition. 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

1 Downloads (Pure)

A Method for Dimensional and Surface Optical Measurements Uncertainty Assessment on Micro Structured Surfaces Manufactured by Jet-ECM

Quagliotti, D., Tosello, G., Islam, A., Hansen, H. N., Zeidler, H., Martin, A., Schubert, A., Brandao, C. & Riemer, O., 2015, Proceedings of the 4M/ICOMM2015 Conference. Annoni, M., Fassi, I., Wiens, G. J. & Dimov, S. (eds.). Research Publishing Services, p. 554-557 138

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

An investigation on the role of thermal fins in the design of micro heat exchangers

Omidvarnia, F., Hansen, H. N. & Sarhadi, A., 2015, Proceedings of Euspen's 15th International Conference & Exhibition. 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Application of Functional Nano-Patterning to Polymer Medical Micro Implants

Bissacco, G., Biondani, F. G., Tang, P. T., Mischkot, M., Hansen, H. N., Zhang, Y. & Ravn, C., 2015, Proceedings of the 4M/ICOMM2015 Conference. Annoni, M., Fassi, I., Wiens, G. J. & Dimov, S. (eds.). Research Publishing Services, 4 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

124 Downloads (Pure)

Characterization method for blisters created in film insert moulding

Wöhner, T., Hansen, H. N., Tosello, G. & Islam, A., 2015, Proceedings of Euspen's 15th International Conference & Exhibition. 3 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

File
1 Downloads (Pure)

Comparative analysis of different process simulation settings of a micro injection molded part featuring conformal cooling

Marhöfer, D. M., Tosello, G., Islam, A. & Hansen, H. N., 2015, Proceedings of Euspen's 15th International Conference & Exhibition. p. 65-66 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Comparison of 3 methods on fabricating micro- /nano- structured surface on 3D mold cavity

Zhang, Y., Hansen, H. N., Bissacco, G. & Biondani, F. G., 2015, Proceedings of Euspen's 15th International Conference & Exhibition. 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Elastic deflection and tilting effect in a multi-stage micro bulk former

Mahshid, R. & Hansen, H. N., 2015, Proceedings of 11th International Conference and Exhibition on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance. The European Society for Precision Engineering and Nanotechnology, p. 325-334

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Gate design in injection molding of microfluidic components using process simulations

Marhöfer, D. M., Tosello, G., Islam, A. & Hansen, H. N., 2015, Proceedings of the 4M/ICOMM2015 Conference. Annoni, M., Fassi, I., Wiens, G. J. & Dimov, S. (eds.). Research Publishing Services

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Investigation of air entrapment and weld line defects in micro injection moulded thermoplastic elastomer micro rings

Hasnaes, F. B., Tosello, G., Calaon, M., Elsborg, R. & Hansen, H. N., 2015, Proceedings of the 4M/ICOMM2015 Conference. Annoni, M., Fassi, I., Wiens, G. J. & Dimov, S. (eds.). Research Publishing Services, p. 266-267 065

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

154 Downloads (Pure)

Mould Design and Material selection for Film Insert Moulding of Direct Methanol Fuel Cell Packaging

Wöhner, T., Senkbeil, S., Olesen, T. L., Hansen, H. N., Islam, A. & Tosello, G., 2015, Proceedings of the 4M/ICOMM2015 Conference. Annoni, M., Fassi, I., Wiens, G. J. & Dimov, S. (eds.). Research Publishing Services, 8 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Optical micro-metrology of structured surfaces micro-machined by jet-ECM

Quagliotti, D., Tosello, G., Islam, A., Hansen, H. N., Zeidler, H., Martin, A., Schubert, A., Brandao, C. & Riemer, O., 2015, Proceedings of the 15th International Conference of the european Society for Precision Engineering and Nanotechnology . 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Precision analysis in billet preparation for micro bulk metal forming

Mahshid, R. & Hansen, H. N., 2015, Proceedings of Euspen's 15th International Conference & Exhibition. The European Society for Precision Engineering and Nanotechnology, p. 53-54

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Precision manufacturing of polymer micro-nano fluidic systems

Garnæs, J., Calaon, M., Tosello, G., Matusiewicz, K. & Hansen, H. N., 2015, Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology. The European Society for Precision Engineering and Nanotechnology, p. 31-32

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Precision manufacturing of thermoplastic elastomer micro rings

Calaon, M., Tosello, G., Hansen, H. N. & Elsborg, R., 2015, Proceedings of the 30th ASPE Annual Meeting. p. 543-546

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Replication Fidelity Assessment in Nano Moulding

Calaon, M., Hansen, H. N., Tosello, G., Garnæs, J. & Li, W., 2015, Proceedings of the 4M/ICOMM2015 Conference. Annoni, M., Fassi, I., Wiens, G. J. & Dimov, S. (eds.). Research Publishing Services, p. 306-309

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

563 Downloads (Pure)

Replication of microstructures on three-dimensional geometries by injection moulding of liquid silicone rubber

Zhang, Y., Mischkot, M., Hansen, H. N. & Hansen, P-E., 2015, Proceedings of the 15th International Conference on Metrology and Properties of Engineering Surfaces, ASPE. American Society for Precision Engineering, 8 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

File
646 Downloads (Pure)

Simulation of a Downsized FDM Nozzle

Hofstätter, T., Pimentel, R., Pedersen, D. B., Mischkot, M. & Hansen, H. N., 2015, Proceedings. COMSOL conference 2015. 5 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File