Hans Nørgaard Hansen

  • Nils Koppels Allé, 404, 026

    2800 Kgs. Lyngby

    Denmark

1994 …2021
If you made any changes in Pure these will be visible here soon.

Research Output 1996 2020

Filter
Report
2012

Measurement capability overview in PolyNano: Final

Calaon, M., Tosello, G. & Hansen, H. N., 2012, 16 p. (Technical Report of DSF (Danish Council for Strategic Research) Project PolyNano).

Research output: Book/ReportReportResearch

PolyNano M.6.1.1 Process validation state-of-the-art: Final

Tosello, G., Hansen, H. N. & Calaon, M., 2012, 44 p. (Technical Report of DSF (Danish Council for Strategic Research) Project PolyNano).

Research output: Book/ReportReportResearchpeer-review

PolyNano M6.2.1 First generation process finger print – design, test and validation: Draft.

Calaon, M., Hansen, H. N. & Tosello, G., 2012, 11 p. (Technical Report of DSF (Danish Council for Strategic Research) Project PolyNano).

Research output: Book/ReportReportResearch

2011

Reference micro-objects and procedures to establish traceability in micro metrology: Final. COTECH EU FP7 Integrated Project (Grant Agreement no.: CP-IP 214491-2)

Gasparin, S., Tosello, G., Hansen, H. N. & Prantl, M., 2011, 44 p. (COnverging TECHnologies for micro systems manufacturing).

Research output: Book/ReportReportResearchpeer-review

Report on tolerancing guidelines for micro manufacturing: Final. COTECH EU FP7 Integrated Project (Grant Agreement no.: CP-IP 214491-2)

Gasparin, S., Tosello, G. & Hansen, H. N., 2011, 50 p. (COnverging TECHnologies for micro systems manufacturing).

Research output: Book/ReportReportResearchpeer-review

2010

Report on best practice for improved μ-IM injection moulding simulation: Final. COTECH EU FP7 Integrated Project (Grant Agreement no.: CP-IP 214491-2)

Tosello, G., Costa, F. & Hansen, H. N., 2010, 100 p. (COnverging TECHnologies for micro systems manufacturing).

Research output: Book/ReportReportResearchpeer-review

Report on non-destructive traceable measuring technologies for micro systems metrology: Final. COTECH EU FP7 Integrated Project (Grant Agreement no.: CP-IP 214491-2)

Gasparin, S., Tosello, G., Hansen, H. N., Prantl, M. & Whiterside, B., 2010, 151 p. (COnverging TECHnologies for micro systems manufacturing).

Research output: Book/ReportReportResearchpeer-review

Report on tool transfer and alignment methods: FInal. COTECH EU FP7 Integrated Project (Grant Agreement no.: CP-IP 214491-2)

Tosello, G., Gasparin, S., De Grave, A. & Hansen, H. N., 2010, 42 p. (COnverging TECHnologies for micro systems manufacturing).

Research output: Book/ReportReportResearchpeer-review

2009
1281 Downloads (Pure)

Examining the influence of injection speed and mould temperature on the tensile strength of polypropylene and ABS

Aarøe, E. R., Blaimschein, K. S., Deker, L., Stentoft-Christensen, H. C., Islam, M. A. & Hansen, H. N., 2009, 1st ed. Kgs. Lyngby, Denmark: Technical University of Denmark. 89 p.

Research output: Book/ReportReportResearchpeer-review

File

Report on COTECH test procedure and characterization techniques: COTECH Deliverable

Islam, M. A. & Hansen, H. N., 2009, COTECH administrator. 42 p.

Research output: Book/ReportReportResearchpeer-review

Report on process requirements: COTECH D1.1.2

Islam, M. A. & Hansen, H. N., 2009, COTECH administrator. 36 p. (COTECH Deliverables).

Research output: Book/ReportReportResearchpeer-review

2008

Moulded interconnect device fabrication by two shot molding and lasert induced selective activation

Sun, J., Islam, M. A. & Hansen, H. N., 2008, 1st ed. Kgs. Lyngby, Denmark: Technical University of Denmark. 89 p.

Research output: Book/ReportReportResearchpeer-review

2007

Handlingsplan for det metrologiske område Længde

Kühle, A., Carneiro, K., De Chiffre, L., Hansen, H. N. & Eldam, K., 2007, DFM.

Research output: Book/ReportReportResearch

2005

Biomimetics approach for methods to release microobjects from the gripping tool

Gegeckaite, A., Moon, J., Hansen, H. N. & Shu, L. H., 2005, 35 p.

Research output: Book/ReportReportResearchpeer-review

CIRP Interlaboratory Comparison of Coordinate Measuring Machines using an Optomechanical Hole Plate

De Chiffre, L., Hansen, H. N., Morace, R. E., Sobiecki, R. & Merzari, F., 2005, Institut for Produktion og Ledelse, DTU. 17 p.

Research output: Book/ReportReportResearchpeer-review

2004

CIRP Interlaboratory Comparison

De Chiffre, L., Hansen, H. N. & Morace, R. E., 2004, IPL: IPL.

Research output: Book/ReportReportResearch

Participant report for Tekniker (Spain) Hole Plate No. 137

De Chiffre, L., Hansen, H. N. & Morace, R. E., 2004, Institut for Produktion og Ledelse, DTU. 18 p.

Research output: Book/ReportReportResearch

Participant report for UNIMETRIK (Spain) Hole Plate No. 136

De Chiffre, L., Hansen, H. N. & Morace, R. E., 2004, Institut for Produktion og Ledelse, DTU. 37 p.

Research output: Book/ReportReportResearch

2001

Surface characterisation of oral implants

Hansen, H. N., Kofod, N. & Gottfredsen, K., 2001, Kgs. Lyngby, Denmark: Technical University of Denmark. 10 p.

Research output: Book/ReportReportResearch

1998

MM98.01 - NIF Audit K2: Lange måleklodser. Resultater CGM

Hansen, H. N. & Sobiecki, R., 1998, 49 p.

Research output: Book/ReportReportResearchpeer-review

MM98.13 - SIMFLEX - Simulation of CMM behaviour. Basic structure

Hansen, H. N., 1998, 103 p.

Research output: Book/ReportReportResearchpeer-review

MM98.16 - EAL M21 STEP GAUGES. Measurements at the Technical University of Denmark

Hansen, H. N., 1998, 150 p.

Research output: Book/ReportReportResearchpeer-review

MM98.39 - Handlingsplan for længde

Chiffre, L. D., Hansen, H. N., Henningsen, J., Rasmussen, S. N. & Østergaard, B., 1998

Research output: Book/ReportReportResearchpeer-review

MM98.44 - SIMFLEX. Structure And Algorithms.

Hansen, H. N., 1998

Research output: Book/ReportReportResearchpeer-review

MM98.61 - Zerodur hulplade

Hansen, H. N., 1998, 90 p.

Research output: Book/ReportReportResearchpeer-review

MM98.96 - Præsentationsprøvning DANAK M5 Form & Diameter

Hansen, H. N. & Malberg, M. P. S., 1998

Research output: Book/ReportReportResearchpeer-review

1997

MM97.31 5. Temadag indenfor korodinatmåling

Hansen, H. N. (ed.), 1997, 72 p.

Research output: Book/ReportReportResearchpeer-review

MM97.32 Standarder indenfor koordinatmåling

Hansen, H. N., 1997, 12 p.

Research output: Book/ReportReportResearchpeer-review

MM97.34 Anvendelse og kalibrering af optiske koordinatmålemaskiner

Hansen, H. N., 1997, 8 p.

Research output: Book/ReportReportResearchpeer-review

MM97.41 Positioneringstest af røntgenmåleudstyr

Hansen, H. N. & Sobiecki, R., 1997, 28 p.

Research output: Book/ReportReportResearchpeer-review

MM97.73 Den danske brugergruppe indenfor koordinatmåling. Status pr. oktober 1997

Hansen, H. N., 1997, 28 p.

Research output: Book/ReportReportResearchpeer-review