1992 …2021

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference article
2014
158 Downloads (Pure)
2012
Open Access
File
110 Downloads (Pure)

Length scale effects on deformation microstructure formation in the near-micrometre grain size regime

Le, G. M., Godfrey, A., Winther, G., Hansen, N. & Huang, X., 2012, In : Proceedings of the Risø International Symposium on Materials Science. 33, p. 63-78

Research output: Contribution to journalConference articleResearchpeer-review

Onset of strain localisation in nanostructured aluminium

Kidmose, J., Lu, L., Hansen, N., Winther, G. & Huang, X., 2012, In : Proceedings of the Risø International Symposium on Materials Science. 33, p. 265-270

Research output: Contribution to journalConference articleResearchpeer-review

2010

3DXRD measurements of lattice rotations in tensile deformed IF steel

Oddershede, J., Wright, J. P., Margulies, L., Huang, X., Poulsen, H. F., Schmidt, S. & Winther, G., 2010, In : Proceedings of the Risø International Symposium on Materials Science. 31, p. 369-374

Research output: Contribution to journalConference articleResearchpeer-review

Alignment of serial sections for 3D microstructural characterization of cold rolled aluminum by EBSD

Fengxiang, L., Godfrey, A., Winther, G. & Juul Jensen, D., 2010, In : Proceedings of the Risø International Symposium on Materials Science. 31, p. 303-309

Research output: Contribution to journalConference articleResearchpeer-review

Dislocation electron tomography of boundaries in deformed aluminium

Ramar, A., Hata, S., Huang, X., Dunin-Borkowski, R. E. & Winther, G., 2010, In : Proceedings of the Risø International Symposium on Materials Science. 31, p. 397-404

Research output: Contribution to journalConference articleResearchpeer-review

In-situ observation of void formation in dual phase steel

Azuma, M., Goutianos, S., Hansen, N., Winther, G. & Huang, X., 2010, In : Proceedings of the Risø International Symposium on Materials Science. 31, p. 243-250

Research output: Contribution to journalConference articleResearchpeer-review

In-situ TEM compression of submicron-sized single crystal copper pillars

Zhang, X., Godfrey, A., Winther, G., Hansen, N. & Huang, X., 2010, In : Proceedings of the Risø International Symposium on Materials Science. 31, p. 489-496

Research output: Contribution to journalConference articleResearchpeer-review

Strain rate dependence of the flow stress in nanostructured aluminium sheets produced by accumulative roll bonding

Kidmose, J., Cai, D. Y., Hansen, N., Winther, G. & Huang, X., 2010, In : Proceedings of the Risø International Symposium on Materials Science. 31, p. 297-302

Research output: Contribution to journalConference articleResearchpeer-review

2009

Cell structures in rolled aluminium and nickel

Wei, Y. L., Huang, X., Winther, G., Hansen, N., Liu, W., Liu, Q. & Godfrey, A., 2009, In : Proceedings of the Risø International Symposium on Materials Science. 30, p. 385-392

Research output: Contribution to journalConference articleResearchpeer-review

Correlation between dislocation content and slip systems in cell structures of cube grains of rolled aluminium

Wei, Y. L., Huang, X., Winther, G., Godfrey, A., Hansen, N., Liu, W. & Liu, Q., 2009, In : Proceedings of the Risø International Symposium on Materials Science. 30, p. 377-383

Research output: Contribution to journalConference articleResearchpeer-review

Dislocation dynamics simulations of slip system interactions and dislocation boundary formation

Devinere, B. & Winther, G., 2009, In : Proceedings of the Risø International Symposium on Materials Science. 30, p. 15-29

Research output: Contribution to journalConference articleResearchpeer-review

Recovery kinetics of commercial purity aluminium after large strain

Yu, T., Hansen, N., Huang, X. & Winther, G., 2009, In : Proceedings of the Risø International Symposium on Materials Science. 30, p. 393-400

Research output: Contribution to journalConference articleResearchpeer-review

Reversible texture transition during accumulative roll bonding

Kamikawa, N., Huang, X., Winther, G., Tsuji, N. & Hansen, N., 2009, In : Ceramic Transactions. 201, p. 669-680

Research output: Contribution to journalConference articleResearchpeer-review

2008

Grain orientation, deformation microstructure and flow stress

Hansen, N., Huang, X. & Winther, G., 2008, In : Materials Science & Engineering: A. 494, 1-2, p. 61-67

Research output: Contribution to journalConference articleResearchpeer-review

Slip systems, lattice rotations and dislocation boundaries

Winther, G., 2008, In : Materials Science & Engineering: A. 483-484, p. 40-46

Research output: Contribution to journalConference articleResearchpeer-review

2007

Mapping partially recrystallised structures by 3DXRD

West, S., Winther, G., Margulies, L., Bergbäck Knudsen, E., Sørensen, H. O., Schmidt, S. & Juul Jensen, D., 2007, In : Materials Science Forum. 558-559, p. 389-394

Research output: Contribution to journalConference articleResearchpeer-review

2006

Mapping grains and their dynamics in three dimensions

Sørensen, H. O., Jakobsen, B., Bergbäck Knudsen, E., Lauridsen, E. M., Fæster Nielsen, S., Poulsen, H. F., Schmidt, S., Winther, G. & Margulies, L., 2006, In : Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. 246, p. 232-237

Research output: Contribution to journalConference articleResearchpeer-review

2005

Flow stress anisotropy - effect of microstructure and texture in aluminium and IF steel

Li, Z. J., Winther, G. & Hansen, N., 2005, In : Materials Science Forum. 495-497, Pt. 1-2, p. 1541-1546

Research output: Contribution to journalConference articleResearchpeer-review

Testing polycrystal plasticity models on observed lattice rotations and dislocation structures

Winther, G., 2005, In : Materials Science Forum. 495-497, Pt. 1-2, p. 1013-1018

Research output: Contribution to journalConference articleResearchpeer-review

2004

Anisotropy of plastic deformation in rolled aluminum

Li, Z. J., Winther, G. & Hansen, N., 2004, In : Materials Science and Engineering: A - Structural Materials: Properties, Microstructure and Processing. 387-389, p. 199-202

Research output: Contribution to journalConference articleResearchpeer-review

Deformation microstructures and their orientation dependency

Hansen, N., Huang, X., Winther, G. & Xing, Q., 2004, In : TMS Letters. 1, p. 73-74

Research output: Contribution to journalConference articleResearchpeer-review

Orientation changes of individual bulk grains during deformation

Winther, G., Margulies, L. & Poulsen, H. F., 2004, In : TMS Letters. 1, p. 75-76

Research output: Contribution to journalConference articleResearchpeer-review

2003

Microstructure of nickel deformed by high pressure torsion to high strains

Huang, X., Winther, G., Hansen, N., Hebesberger, T., Vorhauer, A., Pippan, R. & Zehetbauer, M., 2003, In : Materials Science Forum. 426-432, p. 2819-2824

Research output: Contribution to journalConference articleResearchpeer-review

2002

Lattice rotations of individual bulk grains during deformation

Winther, G., Margulies, L., Poulsen, H. F., Schmidt, S., Larsen, A. W., Lauridsen, E. M., Fæster Nielsen, S. & Terry, A., 2002, In : Materials Science Forum. 408-412, p. 287-292

Research output: Contribution to journalConference articleResearchpeer-review

1997

Deformation induced dislocation boundaries: Alignment and effect on mechanical properties

Winther, G. & Juul Jensen, D., Dec 1997, In : Computational Materials Science. 9, 1-2, p. 251-260

Research output: Contribution to journalConference articleResearchpeer-review