1992 …2021

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Article in proceedings
2016

Low temperature surface hardening of stainless steel; the role of plastic deformation

Bottoli, F., Jespersen, F. N., Hattel, J. H., Winther, G., Christiansen, T. L. & Somers, M. A. J., 2016, Proceedings from the 23rd IFHTSE Congress . ASM International, p. 51-54

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2015

Influence of Plastic Deformation on Low Temperature Surface Hardening of Austenitic Stainless Steel by Gaseous Nitriding

Bottoli, F., Winther, G., Christiansen, T. L. & Somers, M. A. J., 2015, Surface Modification Technologies XXVIII. Proceedings of the Twenty Eighth International Conference on Surface Modification Technologies. Sudarshan, T. S., Vuoristo, P. & Koivuluoto, H. (eds.). VALARDOCS, p. 211-222

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Influence of plastic deformation on low temperature surface hardening of stainless steel by gaseous nitriding

Bottoli, F., Winther, G., Christiansen, T. L. & Somers, M. A. J., 2015, Heat Treating 2015: Proceedings of the 28th ASM Heat Treating Society Conference. ASM International, p. 612-619

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2009

Multiscale modelling of mechanical anisotropy of metals

Winther, G., 2009, IUTAM symposium on modelling nanomaterials and nanosystems. Proceedings. Pyrz, R. & Rauhe, J. C. (eds.). Springer, p. 89-98 340 p. (IUTAM Bookseries).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2008

Reversible texture transition during accumulative roll bonding

Kamikawa, N., Huang, X., Winther, G., Tsuji, N. & Hansen, N., 2008, Proceedings (on CD). Rollett, A. D. (ed.). American Ceramic Society

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2004

Evolution of microstructural morphology and boundary spacing during high pressure torsion of nickel

Huang, X., Vorhauer, A., Winther, G., Hansen, N., Pippan, R. & Zehetbauer, 2004, Ultrafine grained materials 3. Zhu, Y. T., Langdon, T. G. & Valiev, R. Z. (eds.). Warrendale, PA: Minerals, Metals and Materials Society, p. 235-240

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Mechanical effects of 3D morphology of planar dislocation boundaries

Li, Z. J., Winther, G. & Hansen, N., 2004, Evolution of deformation microstructures in 3D. Proceedings. Gundlach, C., Haldrup, K., Hansen, N., Huang, X., Juul Jensen, D., Leffers, T., Li, Z. J., Nielsen, S. F., Pantleon, W., Wert, J. A. & Winther, G. (eds.). Roskilde: Risø National Laboratory, p. 411-416

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearch

Microstructural evolution in aluminium (AA1050) plane strain compressed at 0.7 TM

Knudsen, T., Winther, G. & Hansen, N., 2004, Evolution of deformation microstructures in 3D. Proceedings. Gundlach, C., Haldrup, K., Hansen, N., Huang, X., Juul Jensen, D., Leffers, T., Li, Z. J., Nielsen, S. F., Pantleon, W., Wert, J. A. & Winther, G. (eds.). Roskilde: Risø National Laboratory, p. 383-388

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearch

Slip as a mechanism for structural evolution

Winther, G., 2004, Evolution of deformation microstructures in 3D. Proceedings. Gundlach, C., Haldrup, K., Hansen, N., Huang, X., Juul Jensen, D., Leffers, T., Li, Z. J., Nielsen, S. F., Pantleon, W., Wert, J. A. & Winther, G. (eds.). Roskilde: Risø National Laboratory, p. 211-226

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearch

2003

Analysis and comparison of dislocation structures in cold and hot deformation

Winther, G. & Hansen, N., 2003, Hot deformation of aluminum alloys 3. Jin, Z., Beaudoin, A., Bieler, T. A. & Radhakrishnan, B. (eds.). Warrendale, PA: TMS, p. 135-150

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Characterisation and properties of deformation induced boundaries

Winther, G. & Hansen, N., 2003, Conference proceedings. Palmiere, E. J., Mahfouf, M. & Pinna, C. (eds.). Sheffield: University of Sheffield, Department of Engineering Materials, p. 85-91

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearch

Slip, dislocation structures and lattice rotations

Winther, G., 2003, Proceedings. Khan, A. S., Kazmi, R. & Zhou, J. (eds.). Fulton, MD (US): NEAT Press, p. 304-306

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearch

2002

Modelling of mechanical properties at macroscopic, grain and dislocation boundary scales

Winther, G. & Hansen, N., 2002, Proceedings. Vol. 1. Pyrz, R., Schjødt-Thomsen, J., Rauhe, J. C., Thomsen, T. & Jensen, L. R. (eds.). Aalborg: Aalborg University, p. 121-128

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2001

Dislocation boundaries and slip systems in uniaxially deformed crystals

Winther, G., Huang, X., Fæster Nielsen, S. & Wert, J. A., 2001, Material instabilities and patterning in metals. Proceedings. Zbib, H. M., Campbell, G. H., Victoria, M., Hughes, D. A. & Levine, L. E. (eds.). Warrendale, PA: Materials Research Society, (Materials Research Society Symposium Proceedings, v. 683E).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Dislocation structure of Ni deformed by high pressure torsion

Winther, G., Hansen, N., Hebesberger, T., Huang, X., Pippan, R. & Zehetbauer, M., 2001, Science of metastable and nanocrystalline alloys. Structure, properties and modelling. Proceedings. Dinesen, A. R., Eldrup, M., Juul Jensen, D., Linderoth, S., Pedersen, T. B., Pryds, N. H., Schrøder Pedersen, A. & Wert, J. A. (eds.). Roskilde: Risø National Laboratory, p. 435-440

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Investigation of relationships between matrix orientations and nuclei at triple junctions

Sabin, T. J., Winther, G. & Juul Jensen, D., 2001, Recrystallization and grain growth. Proceedings. Vol. 2. Gottstein, G. & Molodov, D. A. (eds.). Berlin: Springer Verlag, p. 809-814

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2000

Relations between dislocation boundaries, slip planes and most stressed planes

Winther, G., 2000, Recrystallization - Fundamental aspects and relations to deformation microstructure. Proceedings. Hansen, N., Huang, X., Juul Jensen, D., Lauridsen, E. M., Leffers, T., Pantleon, W., Sabin, T. J. & Wert, J. A. (eds.). Roskilde: Risø National Laboratory, p. 653-658

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearch

1999

Characterisation and implications of grain orientation dependent dislocation boundaries

Winther, G., Huang, X. & Hansen, N., 1999, Deformation-induced microstructures: Analysis and relation to properties. Proceedings. Bilde-Sørensen, J. B., Carstensen, J. V., Hansen, N., Juul Jensen, D., Leffers, T., Pantleon, W., Pedersen, O. B. & Winther, G. (eds.). Roskilde: Risø National Laboratory, p. 541-546

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearch

Coupling textural and microstructural evolution

Winther, G., 1999, Proceedings of the 12. International conference on textures of materials. Vol. 1. Szpunar, J. A. (ed.). Ottawa: NRC Research Press, p. 387-392

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearch

Revision of the concept of 1-site models

Winther, G., Leffers, T. & Clausen, B., 1999, Proceedings of the 12. International conference on textures of materials. Vol. 1. Szpunar, J. A. (ed.). Ottawa: NRC Research Press, p. 399-404

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearch

1998

Yield anisotropy caused by interaction between texture and dislocation structure (invited paper)

Winther, G., 1998, Modelling of structure and mechanics of materials from microscale to product. Proceedings. Carstensen, J. V., Leffers, T., Lorentzen, T., Pedersen, O. B., Sørensen, B. F. & Winther, G. (eds.). Roskilde: Risø National Laboratory, p. 185-199

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearch

1996

Flow stress anisotropy

Winther, G., 1996, Baltic Sea metal forming and cutting seminar. Proceedings. Helsinki: Helsinki University of Technology, (TKK-MAK-MML 1/96).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearch