• Produktionstorvet, 425, 108

    2800 Kgs. Lyngby

    Denmark

1992 …2021

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2020

Unusual through-thickness variations of microstructure and texture in heavily rolled and annealed Al–0.3%Cu

Shuai, L. F., Huang, T. L., Wu, G. L., Winther, G., Huang, X. & Mishin, O. V., 2020, In : Materials Characterization. 162, 8 p., 110173.

Research output: Contribution to journalJournal articleResearchpeer-review

2019

Analysis of Grain-Resolved Data from Three-Dimensional X-Ray Diffraction Microscopy in the Elastic and Plastic Regimes

Juul, N. Y., Oddershede, J. & Winther, G., 2019, In : J O M. 72, p. 83–90

Research output: Contribution to journalJournal articleResearchpeer-review

A sheet metal necking formability diagram for nonlinear strain paths

Christiansen, P., Jensen, M. R. B. & Winther, G., 2019, In : Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 233, 7, p. 1287-1294 8 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
112 Downloads (Pure)

Change of the Decorative Properties of Zinc-Plated Zinc Die Castings over Time

Reveko, V., Lampert, F., Winther, G. & Møller, P., 2019, In : International Journal of Metalcasting. 13, 1, p. 130-136

Research output: Contribution to journalJournal articleResearchpeer-review

Mechanical Response of Melt-Quenched Zeolitic Imidazolate Framework Glass to Sharp Contact Loading

Stepniewska, M., Januchta, K., Zhou, C., Qiao, A., Winther, G., Smedskjær, M. M. & Yue, Y., 2019. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
28 Downloads (Pure)
2018

Expanded austenite; from fundamental understanding to predicting composition- and stress-depth profiles

Somers, M. A. J., Christiansen, T. L. & Winther, G., 2018. 10 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
188 Downloads (Pure)
Open Access
File
110 Downloads (Pure)

Indentation of a Melt-Quenched Zeolitic Imidazolate Framework Glass

Stepniewska, M., Januchta, K., Zhou, C., Winther, G., Smedskjær, M. M. & Yue, Y., 2018. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
65 Downloads (Pure)

Numerical Modelling of Mechanical Anisotropy during Low Temperature Nitriding of Stainless Steel

Kücükyildiz, Ö. C., Sonne, M. R., Thorborg, J., Winther, G., Hattel, J. H. & Somers, M. A. J., 2018. 7 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
133 Downloads (Pure)

Probing the structure and mechanical properties of the graphite nodules in ductile cast irons via nano-indentation

Andriollo, T., Fæster, S. & Winther, G., 2018, In : Mechanics of Materials. 122, p. 85-95

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

Residual stress in expanded austenite on stainless steel; origin, measurement, and prediction

Somers, M. A. J., Kücükyildiz, Ö. C., Ormstrup, C. A., Alimadadi, H., Hattel, J. H., Christiansen, T. L. & Winther, G., 2018, In : Materials Performance and Characterization. 7, 4, p. 693-716

Research output: Contribution to journalReviewResearchpeer-review

Open Access
File
88 Downloads (Pure)
2017

Comparison of measured lattice rotations of individual grains with crystal plasticity simulations

Juul, N. Y., Oddershede, J. & Winther, G., 2017.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
55 Downloads (Pure)

Grain interaction mechanisms leading to intragranular orientation spread in tensile deformed bulk grains of interstitial-free steel

Winther, G., Wright, J. P., Schmidt, S. & Oddershede, J., 2017, In : International Journal of Plasticity. 88, p. 108-125

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
153 Downloads (Pure)

Hierarchical microstructures in metals due to dislocation-mediated plasticity

Winther, G., 2017.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
18 Downloads (Pure)

Measured resolved shear stresses and active slip systems in austenitic steel

Winther, G., Juul, N. Y. & Oddershede, J., 2017.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
52 Downloads (Pure)

Measured resolved shear stresses and Bishop-Hill stress states in individual grains of austenitic stainless steel

Juul, N. Y., Oddershede, J., Beaudoin, A., Chatterjee, K., K.A. Koker, M., Dale, D., Shade, P. & Winther, G., 2017, In : Acta Materialia. 141, p. 388-404

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
36 Downloads (Pure)

Measurement and tailoring of residual stress in expanded austenite on austenitic stainless steel

Fernandes, F. A. P., Christiansen, T. L., Winther, G. & Somers, M. A. J., 2017, In : Materials Science and Engineering A. 701, p. 167-173

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
64 Downloads (Pure)

On the elusive crystal structure of expanded austenite

Brink, B., Ståhl, K., Christiansen, T. L., Oddershede, J., Winther, G. & Somers, M. A. J., 2017, In : Scripta Materialia. 131, p. 59-62

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
118 Downloads (Pure)

Parallel evolution of deformation textures and dislocation boundaries

Winther, G., 2017.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
19 Downloads (Pure)
2016

Analysis of experimental grain scale data in a crystal plasticity framework

Winther, G., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
22 Downloads (Pure)
176 Downloads (Pure)

Elastic interaction between twins during tensile deformation of austenitic stainless steel

Juul, N. Y., Winther, G., Dale, D., Koker, M. K. A., Shade, P. & Oddershede, J., 2016, In : Scripta Materialia. 120, 4 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
143 Downloads (Pure)

Intragranular orientation spread induced by grain interaction

Winther, G. & Oddershede, J., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
18 Downloads (Pure)

Low temperature surface hardening of stainless steel; the role of plastic deformation

Bottoli, F., Jespersen, F. N., Hattel, J. H., Winther, G., Christiansen, T. L. & Somers, M. A. J., 2016, Proceedings from the 23rd IFHTSE Congress . ASM International, p. 51-54

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Prediction of dislocation boundary characteristics

Winther, G., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
36 Downloads (Pure)
2015

Analysis of deformation-induced intragranular orientation spread in IF-steel by a combination of 3DXRD and crystal plasticity

Winther, G., Oddershede, J. & Wright, J., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearch

Open Access
File
110 Downloads (Pure)

Deformation-induced microstructural evolution at grain scale

Winther, G., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
106 Downloads (Pure)

Deformation-induced orientation spread in individual bulk grains of an interstitial-free steel

Oddershede, J., Wright, J. P., Beaudoin, A. & Winther, G., 2015, In : Acta Materialia. 85, p. 301–313

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
258 Downloads (Pure)

Influence of Plastic Deformation on Low Temperature Surface Hardening of Austenitic and Precipitation Hardening Stainless Steels by Gaseous Nitriding

Bottoli, F., Winther, G., Christiansen, T. L. & Somers, M. A. J., 2015, In : H T M. 70, 5, p. 228-238

Research output: Contribution to journalJournal articleResearchpeer-review

Influence of Plastic Deformation on Low Temperature Surface Hardening of Austenitic Stainless Steel by Gaseous Nitriding

Bottoli, F., Winther, G., Christiansen, T. L. & Somers, M. A. J., 2015, Surface Modification Technologies XXVIII. Proceedings of the Twenty Eighth International Conference on Surface Modification Technologies. Sudarshan, T. S., Vuoristo, P. & Koivuluoto, H. (eds.). VALARDOCS, p. 211-222

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Influence of plastic deformation on low temperature surface hardening of stainless steel by gaseous nitriding

Bottoli, F., Winther, G., Christiansen, T. L. & Somers, M. A. J., 2015, Heat Treating 2015: Proceedings of the 28th ASM Heat Treating Society Conference. ASM International, p. 612-619

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Low-Energy Dislocation Structure (LEDS) character of dislocation boundaries aligned with slip planes in rolled aluminium

Winther, G., Hong, C. & Huang, X., 2015, In : Philosophical Magazine. 95, 13, p. 1471-1489

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
418 Downloads (Pure)

Microstructural evolution at multiple scales during plastic deformation

Winther, G., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
39 Downloads (Pure)

On the determination of stress profiles in expanded austenite by grazing incidence X-ray diffraction and successive layer removal

Fernandes, F. A. P., Christiansen, T. L., Winther, G. & Somers, M. A. J., 2015, In : Acta Materialia. 94, p. 271-280

Research output: Contribution to journalJournal articleResearchpeer-review

2014
149 Downloads (Pure)

Grain centre mapping - 3DXRD measurements of average grain characteristics.

Oddershede, J., Schmidt, S., Lyckegaard, A., Lauridsen, E. M., Wright, J. P. & Winther, G., 2014, Strain and Dislocation Gradients from Diffraction: Spatially-Resolved Local Structure and Defects.. Barabash, R. & Ice, G. (eds.). World Scientific

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

2013

Dislocation content and alignment of boundaries in a fcc crystal deformed in plane strain

Winther, G., 2013. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File
6216 Downloads (Pure)

Dislocation content of geometrically necessary boundaries aligned with slip planes in rolled aluminium

Hong, C., Huang, X. & Winther, G., 2013, In : Philosophical Magazine. 93, 23, p. 3118-3141

Research output: Contribution to journalJournal articleResearchpeer-review

File
1629 Downloads (Pure)

Formation of geometrically necessary boundaries – Crystal plasticity & DD simulations

Winther, G. & Devincre, B., 2013. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Influence of grain size in the near-micrometre regime on the deformation microstructure in aluminium

Le, G. M., Godfrey, A., Hansen, N., Liu, W., Winther, G. & Huang, X., 2013, In : Acta Materialia. 61, 19, p. 7072-7086

Research output: Contribution to journalJournal articleResearchpeer-review

1 Downloads (Pure)
2012

Characterization of dislocations in deformation-induced planar boundaries of aluminium

Hong, C., Huang, X. & Winther, G., 2012. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File
90 Downloads (Pure)

Effect of hardness of martensite and ferrite on void formation in dual phase steel

Azuma, M., Goutianos, S., Hansen, N., Winther, G. & Huang, X., 2012, In : Materials Science and Technology. 28, 9-10, p. 1092-1100

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
101 Downloads (Pure)

Grain orientation, slip system and dislocation microstructures

Huang, X. & Winther, G., 2012.

Research output: Contribution to conferenceConference abstract for conferenceResearch

Open Access
File
64 Downloads (Pure)

Length scale effects on deformation microstructure formation in the near-micrometre grain size regime

Le, G. M., Godfrey, A., Winther, G., Hansen, N. & Huang, X., 2012, In : Proceedings of the Risø International Symposium on Materials Science. 33, p. 63-78

Research output: Contribution to journalConference articleResearchpeer-review

Microstructure, Slip Systems and Yield Stress Anisotropy in Plastic Deformation

Winther, G., You, Z. S. & Lu, L., 2012. 4 p.

Research output: Contribution to conferencePaperResearch

File
112 Downloads (Pure)

Onset of strain localisation in nanostructured aluminium

Kidmose, J., Lu, L., Hansen, N., Winther, G. & Huang, X., 2012, In : Proceedings of the Risø International Symposium on Materials Science. 33, p. 265-270

Research output: Contribution to journalConference articleResearchpeer-review