Photo of Giuliano Bissacco

Giuliano Bissacco

  • Produktionstorvet, 425, 207

    2800 Kgs. Lyngby

    Denmark

20012022

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Article in proceedings
2017

Characterizing Green Fiber Bottle Prototypes Using Computed Tomography

Saxena, P., Bissacco, G., Stolfi, A. & De Chiffre, L., 2017, Proceedings of the 7th Conference on Industrial Computed Tomography (iCT 2017). 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
216 Downloads (Pure)
2016

Moulding process characterization of paper bottles using computed tomography

Saxena, P. & Bissacco, G., 2016, Proceedings of the Pan Pacific Conference 2016. Korea Technical Association of the Pulp and Paper Industry, p. 186-188

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2015

Application of Functional Nano-Patterning to Polymer Medical Micro Implants

Bissacco, G., Biondani, F. G., Tang, P. T., Mischkot, M., Hansen, H. N., Zhang, Y. & Ravn, C., 2015, Proceedings of the 4M/ICOMM2015 Conference. Annoni, M., Fassi, I., Wiens, G. J. & Dimov, S. (eds.). Research Publishing Services, 4 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Comparison of 3 methods on fabricating micro- /nano- structured surface on 3D mold cavity

Zhang, Y., Hansen, H. N., Bissacco, G. & Biondani, F. G., 2015, Proceedings of Euspen's 15th International Conference & Exhibition. 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Development of a multisensory arm for process monitoring in Robot Assisted Polishing

Pilny, L., Dalla Costa, G., Bissacco, G. & De Chiffre, L., 2015, Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2015. p. 269-270 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

1 Downloads (Pure)
2014

Improvement of replication fidelity in injection moulding of nano structures using an induction heating system

Menotti, S., Hansen, H. N., Bissacco, G., Calaon, M. & Tang, P. T., 2014, Proceedings of ANTEC 2014. Society of Plastics Engineers, 6 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

341 Downloads (Pure)

Integrated Design, an Approach Towards DfµMA

Omidvarnia, F., Hansen, H. N., Bissacco, G. & Islam, A., 2014, 13th International Design Conference - Design 2014. Design Society, p. 343-352

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Micro Injection Molding of Thin Walled Geometries with Induction Heating System

Menotti, S., Hansen, H. N., Bissacco, G., Grev, N. R. & Tang, P. T., 2014, Proceedings ICOMM 2014. 7 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

File
402 Downloads (Pure)

The effect of scattered light sensor orientation on roughness measurement of curved polished surfaces

Pilny, L., Bissacco, G. & De Chiffre, L., 2014, Proceedings of the 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014. euspen, p. 233-236

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

File
254 Downloads (Pure)

Validation of in-line surface characterization by light scattering in Robot Assisted Polishing

Pilny, L., Bissacco, G. & De Chiffre, L., 2014, Proceedings of the 3rd International Conference on Virtual Machining Process technology (VMPT). 8 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

File
351 Downloads (Pure)
2013

Initial verification of an induction heating set-up for injection molding

Menotti, S., Hansen, H. N., Bissacco, G., Tang, P. T. & Ravn, C., 2013, ANTEC 2013 Conference Proceedings. Society of Plastics Engineers, p. 1485-1489 5 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
804 Downloads (Pure)
2012

An investigation on the effect of surface characteristics on adhesion between polymer melts and replication tools

Delaney, K. D., Kennedy, J. D., Bissacco, G. & Moore, E., 2012, Conference Proceedings of 70th Annual Technical Conference of the Society of Plastics Engineers 2012 (ANTEC 2012). Society of Plastics Engineers, Vol. 3. p. 1847-1852

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2010

An analytical model for force prediction in ball nose micro milling of inclined surfaces

Bissacco, G., Hansen, H. N. & De Chiffre, L., 2010, Proceedings of 4th CIRP International Conference on High Performance Cutting.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

1 Downloads (Pure)

Assessment of electrode wear measurement in micro EDM milling

Bissacco, G., Tristo, G. & Valentincic, J., 2010, 6th Int. Conference on Multi Material Micro Manufacture (4M).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

File
356 Downloads (Pure)

A study of demoulding force prediction applied to periodic mould surface profiles

Kennedy, K. D., Kennedy, D. & Bissacco, G., 2010, Proc of the ANTEC conference 2010. Vol. 2. p. 1279-1284

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

File
247 Downloads (Pure)

Demoulding force prediction for micro polymer replication: a review of relevant literature

Delaney, K. D., Bissacco, G. & Kennedy, D., 2010, 6th Int. Conference on Multi Material Micro Manufacture (4M).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

File
249 Downloads (Pure)
2009

Realization and characterization of disposable polymer chips for the study of the filling of microchannels at low capillary numbers

Bissacco, G., Mistura, G., Franzoi, A., Pierno, M., Carmignato, S. & Voltan, A., 2009, Proceedings of the euspen International Conference. Vol. 2. p. 447-450

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Snapshot of Micro EDM technology for industry

Valentinčič, J., Bissacco, G. & Bigot, S., 2009, Proceedings of the 5th International Conference on Multi Material Micro Manufacture (4M-ICOMM).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2008

4M Progress Report 2006-2008

Dimov, S., Matthews, C. W., Brousseau, E., Bigot, S., De Grave, A., Hansen, H. N., Bissacco, G., Tosello, G., Fillon, B., Bolt, P., Engel, U., Johander, P., Jung, E., Kirby, P. B., Mattsson, L., Richter, M., Ritzhaupt-Kleissl, H-J., Schoth, A., Wenzel, C. & Matovic, J., 2008, Proceedings of the 4th Internation Conference in Multi-Material Micro Manufacturing. Whittles Publishing, 330 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Direct dynamic calibration of dynamometers for micro milling operations

Bissacco, G., Bau, A. & Hansen, H. N., 2008, Proceedings of the 10. International conference of the European Society for Precision Engineering and Nanotechnology. Austria: euspen, Vol. 1. p. 500-503

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Force analysis in micro milling Al 6082 T6 in various engagement conditions

Bissacco, G., Gietzelt, T. & Hansen, H. N., 2008, Proceedings of the 4th International Conference on Multi Material Micro Manufacture (4M). p. 241-244

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Multidisciplinary graduate course and PhD summerschool in micromechanical system design and manufacture

Hansen, H. N., De Grave, A. & Bissacco, G., 2008, proceedings of the EUSPEN. The European Society for Precision Engineering and Nanotechnology

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Setup of a micro milling force knowledge database - a 4M cross divisional project

Bissacco, G. & Gietzelt, T., 2008, Proceedings of the 10. International conference of the European Society for Precision Engineering and Nanotechnology. Austria: euspen, Vol. 2. p. 170-173

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Tooling process chains for polymer replication of micro fluidic devices

De Grave, A., Hansen, H. N. & Bissacco, G., 2008, Proceedings of the 5th International Symposium on Nanomanufacturing (ISNM5).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2007

An uncertainty model for thermal effects on axial depth of cut in micro milling

Bissacco, G., Hansen, H. N. & De Chiffre, L., 2007, Proc. of the Euspen Topical Meeting on Thermal Effects in Precision Systems. p. 13-15

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Characterization of pulses in micro EDM milling based on wear and material removal

Bissacco, G., Valentincic, J., Wive, B. D. & Hansen, H. N., 2007, Proceedings of the 3rd international conference on multi-material micro manufacture. Whittles Publishing/CRC Press, p. 297-300

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Micro tools manufacturing for polymer replication with high aspect ratio structures using µEDM of silicon, selective etching and electroforming

Tosello, G., Bissacco, G., Tang, P. T., Hansen, H. N. & Nielsen, P. C., 2007, Proceedings of the 7th International Workshop on High-Aspect-Ratio Micro-Structure Technology (HARMST007). p. 43-44 314 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Thermal behaviour of micro EDM milling machine and influence on electrode wear compensation

Bissacco, G., Hansen, H. N. & Wive, B. D., 2007, Proceedings of the 7th international conference and 9th annual general meeting of euspen. Cranfield, UK: euspen, Vol. II. p. 25-28 570 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2006

A cutting force model for micromilling applications

Bissacco, G., Hansen, H. N. & De Chiffre, L., 2006, Proceedings of the EUSPEN cutting force model for micromilling applications. Baden bei Wien, Vienna, Austria: euspen, p. 244-247

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

High–Precise Micro Bonding Process using a Focused Stream of Hot Air

Andrijasevic, D., Bissacco, G., Giouroudi, I., Smetana, W. & Brenner, W., 2006, Proceeding of the EUSPEN. Baden bei Wien, Vienna, Austria: euspen, p. 228-231

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Indirect tooling based on micromilling, electroforming and selective etching

Tang, P. T., Fugl, J., Uriarte, L., Bissacco, G. & Hansen, H. N., 2006, 4M 2006 - Second International Conference on Multi-Material Micro Manufacture. Elsevier, p. 183-186 448 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Realization and characterization of high precision micro grooves on green ceramic

Bissacco, G., Andrijasevic, D. & Hansen, H. N., 2006, Proceedings of the EUSPEN. Baden bei Wien, Vienna, Austria: euspen, Vol. Vol. 2. p. 192-195

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2005

Geometrical characterization of micro end milling tools

Borsetto, F., Bariani, P., Bissacco, G., De Chiffre, L. & Hansen, H. N., 2005, Proc. of 5th euspen International Conference. F. C. T. T. P. F. P. G-B. (ed.).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Investigation on a procedure for optimal axial depth of cut accuracy in micromilling

Bissacco, G., Hansen, H. N. & De Chiffre, L., 2005, Proc. of 5th euspen International Conference. F. C. T. T. P. F. P. G-B. (ed.).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Manufacturing of an injection moulding mould insert with three-dimensional micro features by micromilling

Bissacco, G., Fugl, J., Tang, P. T. & De Chiffre, L., 2005, Proc. of 5th euspen International Conference. F. C. T. T. P. F. P. G-B. (ed.).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Micro product development methods - how do we focus on the right issues?

Hansen, H. N., De Grave, A. & Bissacco, G., 2005, Proc. of the 1st 4M Int. Conf. on Multi Material Micro Manufacture. W. M. A. S. D. (ed.).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Precision manufacturing methods of inserts for injection molding of microfluidic systems.

Bissacco, G., Hansen, H. N., Tang, P. T. & Fugl, J., 2005, ASPE Spring Topical Meeting on Precision Mecro/Nano Scale Polymer Based Component & Device Fabricati. American Society of Mechanical Engineers

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Wear of micro end mills

Bissacco, G., Hansen, H. N. & De Chiffre, L., 2005, Proc. of 5th euspen International Conference. F. C. T. T. P. F. P. G-B. (ed.).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2004

Effect of Cutting Parameters on Microhardness in 2 mm Slot Milling Hardened Tool Steel

Bissacco, G., Hansen, H. N. & De Chiffre, L., 2004, Proc. of the 2nd ICTMP. N. B. A. O. (ed.). Vedbæk: IKON Tekst & Tryk A/S

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Experimental characterization of micromilled surfaces by large range AFM

Bariani, P., Bissacco, G., Hansen, H. N. & De Chiffre, L., 2004, Nanoscale 2004. 10 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Improving axial depth of cut accuracy in micromilling

Bissacco, G., Hansen, H. N. & De Chiffre, L., 2004, Proc. of 4th euspen International Conference. Kempston: LG Digital

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2003

On machine measurements of electrode wear in micro EDM milling

Valentincic, J., Bissacco, G. & Tristo, G., 2003, ISMTII 2003.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

File
158 Downloads (Pure)