Photo of Filip Bo Salling
  • Produktionstorvet, 425, 225

    2800 Kgs. Lyngby

    Denmark

20172020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2020

Mechanics of materials in modern manufacturing methods and processing techniques: Numerical modelling of the mechanics of pultrusion

Sandberg, M., Yuksel, O., Comminal, R. B., Sonne, M. R., Jabbari, M., Larsen, M., Rasmussen, F. S., Baran, I., Spangenberg, J. & Hattel, J. H., 2020, Mechanics of Materials in Modern Manufacturing Methods and Processing Techniques . Silberschmidt, V. V. (ed.). Amsterdam: Elsevier

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

Permeability and compaction behaviour of air-texturised glass fibre rovings: A characterisation study

Sandberg, M., Kabachi, A., Volk, M., Salling, F. B., Ermanni, P., Hattel, J. H. & Spangenberg, J., 2020, In : Journal of Composite Materials. 54, 27, p. 4241–4252

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
33 Downloads (Pure)
2019

A Characterization Study Relating Cross-Sectional Distribution of Fiber Volume Fraction and Permeability

Rasmussen, F. S., Sonne, M. R., Larsen, M., Mikkelsen, L. P. & Hattel, J. H., 2019, Proceedings of 22nd International Conference on Composite Materials. 7 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
127 Downloads (Pure)

Fiber segmentation from 3D X-ray computed tomography of composites with continuous textured glass fibre yarns

Rasmussen, F. S., Emerson, M. J., Sonne, M. R., Hattel, J. H., Mikkelsen, L. P. & Dahl, V. A., 2019, Proceedings of 2019 International Conference on Tomography of Materials & Structures. 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
106 Downloads (Pure)
115 Downloads (Pure)

Simulation of resin-impregnation, heat-transfer and cure in a resin-injection pultrusion process

Sandberg, M., Rasmussen, F. S., Hattel, J. H. & Spangenberg, J., 2019, In : AIP Conference Proceedings. 2113, 1, 7 p., 020022.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
183 Downloads (Pure)
2018

Meso-Scale Process Modelling Strategies for Pultrusion of Unidirectional Profiles

Yuksel, O., Baran, I., Rasmussen, F. S., Spangenberg, J., Ersoy, N., Hattel, J. H. & Akkerman, R., 2018, 18th European Conference on Composite Materials (ECCM-18) . Applied Mechanics Laboratory, 8 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

146 Downloads (Pure)

Modelling the Effect of Non-Uniform Fibre Distribution on the Curing Behaviour in Resin Injection Pultrusion

Rasmussen, F. S., Klingaa, C. G., Larsen, M., Sonne, M. R., Spangenberg, J. & Hattel, J. H., 2018, 18th European Conference on Composite Materials (ECCM-18) . Applied Mechanics Laboratory, 8 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

120 Downloads (Pure)
2017

2D Numerical Modelling of the Resin Injection Pultrusion Process Including Experimental Resin Kinetics and Temperature Validation

Rasmussen, F. S., Sonne, M. R., Larsen, M., Spangenberg, J., Lilleheden, L. T. & Hattel, J. H., 2017. 10 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
162 Downloads (Pure)

The effect of saturation on resin flow in injection pultrusion: a preliminary numerical study

Spangenberg, J., Larsen, M., R. Rodríguez, R., M. M. Sánchez, P., Rasmussen, F. S., Sonne, M. R. & Hattel, J. H., 2017. 6 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
163 Downloads (Pure)