David Bue Pedersen

2023

Experimental characterization of additively manufactured CF-PEEK dies for complex profile in polymer profile extrusion

Aimon, A. H., Tosello, G., Pedersen, D. B. & Calaon, M., 2023, European Society for Precision Engineering and Nanotechnology, Conference Proceedings : 23rd International Conference and Exhibition, EUSPEN 2023. Riemer, O., Nisbet, C. & Phillips, D. (eds.). euspen, 3 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Experimental testing and characterization of additively manufactured CF-PEEK dies for complex profile in polymer profile extrusion

Aimon, A. H., Tosello, G., Pedersen, D. B. & Calaon, M., 2023, European Society for Precision Engineering and Nanotechnology, Conference Proceedings : 23rd International Conference and Exhibition, EUSPEN 2023. Riemer, O., Nisbet, C. & Phillips, D. (eds.). euspen, p. 93-94

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

6 Downloads (Pure)

In-process monitoring of selective thermoplastic electrophotographic process by laser profiling system and digital fingerprint

Shan, S., Yeh, H. P., Rotari, M., Meinert, K. Æ., Hattel, J. H., Pedersen, D. B., Kulahci, M., Hansen, H. N., Zhang, Y. & Calaon, M., 2023, European Society for Precision Engineering and Nanotechnology, Conference Proceedings: 23rd International Conference and Exhibition, EUSPEN 2023. Riemer, O., Nisbet, C. & Phillips, D. (eds.). euspen, p. 181-182

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Simple sensor manufacturing by Laser Powder Bed Fusion of conductive polymer blends

Budden, C. L., Grønborg, F., Wolstrup, A. F., Lalwani, A. R., Zsurzsan, T. G., Daugaard, A. E. & Pedersen, D. B., 2023, European Society for Precision Engineering and Nanotechnology, Conference Proceedings: 23rd International Conference and Exhibition, EUSPEN 2023. Riemer, O., Nisbet, C. & Phillips, D. (eds.). euspen, p. 123-126

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

The integration of additively manufactured dies and flow simulation in polymer extrusion process chain

Aimon, A. H., Tosello, G., Pedersen, D. B. & Calaon, M., 2023, European Society for Precision Engineering and Nanotechnology, Special Interest Group Meeting: Advancing Precision in Additive Manufacturing. euspen, 2 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

2022

A Numerical Investigation of the Inter-Layer Bond and Surface Roughness during the Yield Stress Buildup in Wet-On-Wet Material Extrusion Additive Manufacturing

Mollah, M. T., Serdeczny, M. P., Comminal, R., Seta, B., Brander, M., Pedersen, D. B. & Spangenberg, J., 2022, 2022 ASPE and euspen Summer Topical Meeting. American Society for Precision Engineering, Vol. 77. p. 131-134

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

2019

3d Printed Mold for Powder Injection Molding Process

Basso, A., Mendez Ribo, M., Danielak, A. H., Yang, B., Kjeldsteen, P., Valler, P., Pedersen, D. B. & Zhang, Y., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 71-74

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

620 Downloads (Pure)

A method for identification and quantification of thermal lensing in powder bed fusion

Andersen, S. A., Valente, E. H., Nadimpalli, V. K., Hansen, H. N. & Pedersen, D. B., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips , D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 230-233

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

261 Downloads (Pure)

Characterization techniques for evaluation of micro scale vat photopolymerization-based additive manufacturing

Danielak, A. H., Mendez Ribo, M., Üstünyagiz, E., Almdal, K., Islam, A. & Pedersen, D. B., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 44-47

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Considerations for interpreting in-situ photodiode sensor data in pulsed mode laser powder bed fusion

Karthik Nadipalli, V., Andersen, S. A., Nielsen, J. S. & Pedersen, D. B., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 66-69

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

494 Downloads (Pure)

Dimensional and Form Characterization of a Benchmarking Specimen Subjected to Different Post‐Processing Technologies for Metal Additive Manufacturing

Kain, M., Loaldi, D., Davoudinejad, A., Calaon, M., Vedel-Smith, N. K., Haahr‐Lillevang, L., Pedersen, D. B. & Tosello, G., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 104-5

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

172 Downloads (Pure)

Direct Fabrication of Microstructured Surfaces by Additive Manufacturing

Davoudinejad, A., Pedersen, D. B. & Tosello, G., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach , R. K., Billington, D. & Phillips , D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 118-119

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

139 Downloads (Pure)

Experimental analysis of the filament feeding force in material extrusion additive manufacturing

Serdeczny, M. P., Comminal, R., Pedersen, D. B. & Spangenberg, J., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 141-145

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

240 Downloads (Pure)

Geometrical shape assessment of additively manufactured features by Continuous Liquid Interface Production, vat photopolymerization method

Davoudinejad, A., Jessen, A. K., Farahani, S. D., Franke, N., Pedersen, D. B. & Tosello, G., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach , R. K., Billington, D. & Phillips , D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 116-117

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

112 Downloads (Pure)

Impact of post-processing stages on vat-photopolymerized specimens

M. Ribo, M., Danielak, A. H., Andersen, S. A., Üstünyagiz, E., Islam, A. & Pedersen, D. B., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 155 1 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

169 Downloads (Pure)

Influence of atmosphere on microstructure and nitrogen content in AISI 316L fabricated by laser‐based powder bed fusion

Valente, E. H., Nadimpalli, V. K., Andersen, S. A., Pedersen, D. B., Christiansen, T. L. & Somers, M. A. J., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips , D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 244-247

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

447 Downloads (Pure)

Influence of the post-curing treatment on the mechanical properties in the vat photopolymerization technique

Üstünyagiz, E., Danielak, A. H., M. Ribo, M. & Pedersen, D. B., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 132 1 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

152 Downloads (Pure)

Methodology for geometric characterization and dimensioning of additively manufactured channels

Dahmen, T., Klingaa, C. G., Baier, S., Pedersen, D. B. & Hattel, J. H., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 133-136

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

144 Downloads (Pure)

Modelling of material deposition in big area additive manufacturing and 3D concrete printing

Comminal, R., Serdeczny, M. P., Ranjbar, N., Mehrali, M., Pedersen, D. B., Stang, H. & Spangenberg, J., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 151-154

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

599 Downloads (Pure)

Multi-material additive manufacturing of steels using laser powder bed fusion

Nadimpalli, V. K., Dahmen, T., Valente, E. H., Mohanty, S. & Pedersen, D. B., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach , R. K., Billington, D. & Phillips , D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 240-243

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

802 Downloads (Pure)

Optimization of a self-peeling vat for precision vat photopolymerization setups

M. Ribo, M., Danielak, A. H., Islam, A. & Pedersen, D. B., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach , R. K., Billington, D. & Phillips , D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 234-237

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

276 Downloads (Pure)

Quality Assurance of Reference Specimens Manufactured by Continuous Liquid Interface Production Using Coordinate Metrology

Kain, M., Davoudinejad, A., Quagliotti, D., Nielsen, J. S., Liltorp, K., Pedersen, D. B., Farahani, S. D., Franke, N. & Tosello, G., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach , R. K., Billington, D. & Phillips , D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 248-249

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

134 Downloads (Pure)

Strain gauge filament for extrusion based additive manufacturing

Madsen, F. G., Pedersen, D. B. & Daugaard, A. E., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 54 1 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

106 Downloads (Pure)

2018

A 5D DoF Parallel Kinematic Controler For Big Area Additive Manufacturing

Jensen, M. L., K. Kiewning, M., Spangenberg, J., Andersen, S. B., Pedersen, D. B. & Hansen, H. N., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, p. 167-171

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

A Beam Modulator and Galvanometer Controller for Metal Powder Bed Fusion

Andersen, S. A., Del Rio, S., Pedersen, D. B. & Hansen, H. N., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, p. 172-177

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

1 Downloads (Pure)

Assessment of sub-mm features replication capability in injection moulding using a multi-cavity tool produced by additive manufacturing

Davoudinejad, A., Charalambis, A., Tosello, G., Zhang, Y., Calaon, M., Pedersen, D. B. & Hansen, H. N., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 383-384

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

105 Downloads (Pure)

Characterisation of the Influence of the Colour in Resin for Micro Parts Production by Photopolymerisation Based Additive Manufacturing System

Danielak, A. H., M. Ribo, M., Pedersen, D. B. & Islam, A., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, p. 64-69

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Computer vision for focus calibration of photo-polymerization systems

Ingwersen, C. K., Mortensen, H. L., Ribo, M. M., Danielak, A. H., Eiríksson, E. R., Nielsen, A. A. & Pedersen, D. B., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, p. 89-91

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Geometrical shape assessment of additively manufactured features by direct light processing vat polymerization method

Péreza, L. C. D., Davoudinejad, A., Quagliotti, D., Pedersen, D. B., Garcíaa, J. A. A., Yagüe-Fabraa, J. A. & Tosello, G., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 277-278

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

90 Downloads (Pure)

Geometric and Fature Size Design Effect on Vat Photopolymerization Micro Additively Manufactured Surface Deatures

Davoudinejad, A., Péreza, L. C. D., Quagliotti, D., Pedersen, D. B., Garcíaa, J. A. A., Yagüe-Fabra, J. A. & Tosello, G., 2018, Proceedings of the Joint Special Interest Group meeting: Additive Manufacturing. The European Society for Precision Engineering and Nanotechnology, p. 5

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Influence of thermal ageing on the mechanical properties of an additively manufactured photopolymer used in soft tooling applications

Mischkot, M., Krexner, G., Soprunyuk, V., Schranz, W., Pedersen, D. B. & Tosello, G., 2018, Proceedings of the 18th International Conference of the european Society for Precision Engineering and Nanotechnology . Billington , D., Leach, R. K., Phillips , D., Riemer , O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 241-242

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

145 Downloads (Pure)

Intensity Mapping for Mask Projection based Photopolymerization

Warburg, F., Ribo, M. M., Luongo, A., Danielak, A. H. & Pedersen, D. B., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, p. 92-96

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Measurements and simulations of the cross-section of the printed strands in fused filament fabrication

Serdeczny, M. P., Comminal, R., Pedersen, D. B. & Spangenberg, J., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, p. 78-82

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Numerical simulation of extrusion-based additive manufacturing - Effect of the nozzle geometry on the strand cross-section

Comminal, R., Serdeczny, M. P., Pedersen, D. B. & Spangenberg, J., 2018, Proceedings of the 18th International Conference of the european Society for Precision Engineering and Nanotechnology . Billington , D., Leach, R. K., Phillips , D., Riemer , O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 285-286

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

264 Downloads (Pure)

Numerical Study of the Impact of Shear Thinning Behaviour on the Strand Deposition Flow in the Extrusion-Based Additive Manufacturing

Serdeczny, M. P., Comminal, R., Pedersen, D. B. & Spangenberg, J., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 283-284

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

265 Downloads (Pure)

Recent Developments in Fiber-Reinforced Additive Manufacturing of Injection Molding Inserts

Hofstätter, T., Pedersen, D. B., Tosello, G. & Hansen, H. N., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, p. 110-115

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

125 Downloads (Pure)

Thermal behaviour of additively manufactured injection moulding inserts

Hofstätter, T., Pedersen, D. B., Tosello, G. & Hansen, H. N., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 255-256

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

70 Downloads (Pure)

2017

Life Cycle Assessment of Fiber-Reinforced Additive Manufacturing for Injection Molding Insert Production

Hofstätter, T., Stotz, P. M., Bey, N., Pedersen, D. B., Tosello, G. & Hansen, H. N., 2017, Book of Abstracts Sustain 2017. Kgs. Lyngby: Technical University of Denmark, 1 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

253 Downloads (Pure)

2015

Predicting Color Output of Additive Manufactured Parts

Eiríksson, E. R., Pedersen, D. B. & Aanæs, H., 2015, Proceedings of Achieving Precision Tolerances in Additive Manufacturing: ASPE Spring Topical Meeting. ASPE – The American Society for Precision Engineering, Vol. 60. p. 95-99

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

436 Downloads (Pure)

Spatial Accuracy of Embedded Surface Coloring in Color 3D Printing

Pedersen, D. B., Hansen, H. N. & Eiríksson, E. R., 2015, Proceedings of Achieving Precision Tolerances in Additive Manufacturing: ASPE Spring Topical Meeting. ASPE – The American Society for Precision Engineering, Vol. 60. p. 147-150

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

449 Downloads (Pure)

David Bue Pedersen

Research output

Search results