No photo of Dario Loaldi
  • Produktionstorvet, 427, 322

    2800 Kgs. Lyngby

    Denmark

20172020
If you made any changes in Pure these will be visible here soon.

Research Output 2017 2020

2020

Influences of micro-ridges orientation and position on the replication of micro-structured surfaces by injection molding

Regi, F., Basso, A., Kain, M., Loaldi, D., Li, D., Zhang, Y. & Tosello, G., 2020, In : AIP Conference Proceedings. 2205, 1, 5 p., 020013.

Research output: Contribution to journalConference articleResearchpeer-review

2019
7 Downloads (Pure)

Comparison of Selective Laser Melting Post-Processes based on Amplitude and Functional Surface Roughness parameters

Loaldi, D., Kain, M., Haahr‐Lillevang, L., Vedel-Smith, N. K. & Tosello, G., 2019. 2 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
14 Downloads (Pure)

Comparison of Selective Laser Melting Post-Processes based on Amplitude and Functional Surface Roughness parameters

Loaldi, D., Kain, M., Haahr‐Lillevang, L., Vedel-Smith, N. K. & Tosello, G., 2019. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
60 Downloads (Pure)

Dimensional and Form Characterization of a Benchmarking Specimen Subjected to Different Post‐Processing Technologies for Metal Additive Manufacturing

Kain, M., Loaldi, D., Davoudinejad, A., Calaon, M., Vedel-Smith, N. K., Haahr‐Lillevang, L., Pedersen, D. B. & Tosello, G., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 104-5

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File

Functionality characterization of injection moulded micro-structured surfaces

Regi, F., Doest, M., Loaldi, D., Li, D., Frisvad, J. R., Tosello, G. & Zhang, Y., 2019, In : Precision Engineering. 60, p. 594-601

Research output: Contribution to journalJournal articleResearchpeer-review

Injection Moulding optimization of nanostructured components using surface fingerprint

Loaldi, D., Zhang, Y., Calaon, M., Quagliotti, D. & Tosello, G., 2019. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Modelling the filling behavior of micro structured plastic optical components

Loaldi, D., Quagliotti, D., Calaon, M. & Tosello, G., 2019, (Accepted/In press) Proceedings of WCMNM 2018. 5 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

6 Downloads (Pure)

Tapping AFM measurements artefacts in the acquisition of high-aspect-ratio rectangular nanostructures using dedicated sharp tips

Loaldi, D., Quagliotti, D., Calaon, M., Czolkos, I., Johansson, A., Nielsen, T., Garnaes, J. & Tosello, G., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 336-337

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

14 Downloads (Pure)

Tapping AFM measurements artefacts in the acquisition of high-aspect-ratio rectangular nanostructures using dedicated sharp tips

Loaldi, D., Quagliotti, D., Calaon, M., Czolkos, I., Johansson, A., Nielsen, T., Garnaes, J. & Tosello, G., 2019, p. 1.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
2018
305 Downloads (Pure)

Effect of process parameters on flow length and flash formation in injection moulding of high aspect ratio polymeric micro features

Eladl, A., Mostafa, R., Islam, A., Loaldi, D., Soltan, H., Hansen, H. N. & Tosello, G., 2018, In : Micromachines. 9, 2, 19 p., 58.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
55 Downloads (Pure)

Evaluation of injection pressure as a process fingerprint for Injection and Injection Compression Molding of micro structured optical components

Loaldi, D., Calaon, M., Quagliotti, D., Parenti, P., Annoni, M. & Tosello, G., 2018. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
161 Downloads (Pure)

Manufacturing Signatures of Injection Molding and Injection Compression Molding for Micro-Structured Polymer Fresnel Lens Production

Loaldi, D., Quagliotti, D., Calaon, M., Parenti, P., Annoni, M. & Tosello, G., 2018, In : Micromachines. 9, 12, 21 p., 653.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
23 Downloads (Pure)

Pitch measurements validation of a structural coloured steel insert using Scanning Confocal Microscopy (SCM) and Atomic Force Microscopy (AFM)

Loaldi, D., Zhang, Y., Calaon, M., Yang, Y., Guochin, P., Garnæs, J. & Tosello, G., 2018, Proceedings of the 18th International Conference of the european Society for Precision Engineering and Nanotechnology . Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 497-498

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
61 Downloads (Pure)
Open Access
File
55 Downloads (Pure)

Structural “decoration” of plastic products replicated from nanoimprinted steel inserts

Loaldi, D., Calaon, M., Quagliotti, D., Johansson, A., Czolkos, I., Nielsen, T. & Tosello, G., 2018. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
218 Downloads (Pure)

Tolerance verification of precision injection moulded Fresnel lenses

Loaldi, D., Calaon, M., Quagliotti, D., Parenti, P., Annoni, M. & Tosello, G., 2018, In : Procedia CIRP. 75, p. 137-142

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
40 Downloads (Pure)

Zero Defects manufacturing in Injection Compression Molding of Polymer Fresnel Lenses

Loaldi, D., Calaon, M., Parenti, P., Tosello, G. & Annoni, M., 2018. 5 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
2017
148 Downloads (Pure)

Laser confocal microscope noise evaluation on injection compression moulded (ICM) transparent polymer Fresnel lenses

Loaldi, D., Calaon, M., Quagliotti, D., Baruffi, F., Parenti, P., Tosello, G. & Annoni, M., 2017. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File