• Brovej, 118, 122

    2800 Kgs. Lyngby

    Denmark

  • Nils Koppels Allé, 404, 027

    2800 Kgs. Lyngby

    Denmark

20002021
If you made any changes in Pure these will be visible here soon.

Research Output 2001 2019

Filter
Article in proceedings
2019
40 Downloads (Pure)

Cruciform Specimen Designs for Planar Biaxial Fatigue Testing in Composites

Moncy, A., Castro, O. & Berggreen, C., 2019, Proceedings of 22nd International Conference on Composite Materials. 7 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
2017

Composite Coiled Tubing for Extended Reach in Horizontal Oil Wells

Costache, A. & Berggreen, C., 2017, ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, Vol. 4. 10 p. OMAE2017-62579

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Energy release rate and mode mixity of face/core debonds in sandwich beams

Massaba, R., Barbieri, L. & Berggreen, C., 2017, Proceedings of the XXIII Conference of the Italian Association of Theoretical and Applied Mechanics (AIMETA 2017). Aimeta, Vol. 2. p. 1913-1919

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2016

Comparison Between Stress Obtained by Numerical Analysis and In-Situ Measurements on a Flexible Pipe Subjected to In-Plane Bending Test

Vestergaard Lukassen, T., Glejbøl, K., Lyckegaard, A. & Berggreen, C., 2016, Proceedings of the ASME 35th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2016). American Society of Mechanical Engineers, Vol. 5: Pipelines, Risers, and Subsea Systems. 8 p. OMAE2016-55060

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

433 Downloads (Pure)

Experimental investigation of the thickness effect for large as-welded SAW S355 steel specimens

Ólafsson, Ó. M., Jensen, J. J. & Berggreen, C., 2016, Proceedings of the 13th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS’2016). Dam Nielsen, U. & Juncher Jensen, J. (eds.). Technical University of Denmark, 7 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
168 Downloads (Pure)

The Effects on the Operating Condition of a Passenger Ship Retro-fitted with a Composite Superstructure

Karatzas, V., Hjørnet, N. K., Kristensen, H. O. H., Berggreen, C. & Jensen, J. J., 2016, Proceedings of the 13th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS’2016). Dam Nielsen, U. & Juncher Jensen, J. (eds.). Technical University of Denmark, 5 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
2015
350 Downloads (Pure)

Fracture Testing of Honeycomb Core Sandwich Composites Using the DCB-UBM Test

Saseendran, V., Berggreen, C. & Carlsson, L. A., 2015, Proceedings of the 20th International Conference on Composite Materials (ICCM20). ICCM20 Secretariat, 5 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File

Implementing Composite Superstructures in Large Passenger Ships

Karatzas, V., Berggreen, C., Jensen, J. J. & Hjørnet, N., 2015, Proceedings of the International Conference on Lightweight Design of Marine Structures (LIMAS 2015). ASRANet Ltd., 6 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

267 Downloads (Pure)

Retrofitting the Superstructure of a Large Passenger Ship Using Composites – A Demonstration

Karatzas, V., Hjørnet, N., Berggreen, C. & Jensen, J. J., 2015, Proceedings of the 20th International Conference on Composite Materials (ICCM20). ICCM20 Secretariat, 6 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
2013

Hybrid Testing of Composite Structures with Single-Axis Control

Waldbjørn, J. P., Høgh, J. H., Stang, H., Berggreen, C., Schmidt, J. W. & Branner, K., 2013, Proceedings of the 19th International Conference on Composite Materials. 11 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2012
99 Downloads (Pure)

System reliability effects in wind turbine blades

Dimitrov, N. K., Friis-Hansen, P. & Berggreen, C., 2012, Proceedings of IFIP WG7.5 Working Conference on Reliability and Optimization of Structural Systems. IFIP, p. 183-190

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
2011
159 Downloads (Pure)

Enforsing a system approach to composite failure criteria for reliability analysis

Dimitrov, N. K., Friis-Hansen, P. & Berggreen, C., 2011, Proceedings of the 18th International Conference on Composite Materials (ICCM). 5 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
2010

A methodology to study cyclic debond growth at constant mode-mixity and energy release rate

Quispitupa, A., Berggreen, C. & Carlsson, L. A., 2010, ICSS 9. Ravichandran, G. (ed.).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Application of a cycle jump technique for acceleration of fatigue crack growth simulation

Moslemian, R., Karlsson, A. M. & Berggreen, C., 2010, ICSS 9. Ravichandran, G. (ed.).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Application of a Cycle Jump Technique for Acceleration of Fatigue Crack Growth Simulation

Moslemian, R., Berggreen, C. & Karlsson, A. M., 2010, Proceedings — NAFEMS Nordic Seminar: Simulating Composite Materials and Structures.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Damage assessment of compression loaded debond damaged sandwich panels

Moslemian, R., Berggreen, C., Quispitupa, A. & Hayman, B., 2010, ICSS 9. Ravichandran, G. (ed.).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Effects of face sheet damage on residual strength of GRP sandwich panels in naval ships

Hayman, B., Echtermeyer, A. T. & Berggreen, C., 2010, ICSS 9. Ravichandran, G. (ed.).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Energy release rate and mode-mixity for a general asymmetric debonded sandwich specimen

Kardomateas, G. A., Berggreen, C. & Karlsson, L. A., 2010, ICSS 9. Ravichandran, G. (ed.).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Estimation of fracture parameters in foam core materials using thermal techniques

Dulieu-Barton, J. M., Berggreen, C. & Boyenval Langlois, C., 2010, ICSS 9. Ravichandran, G. (ed.).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Experimental fracture toughness characterization using the modified TSD specimen

Berggreen, C., Quispitupa, A., Alonso, J. L. & Carlsson, L. A., 2010, ICSS 9. Ravichandran, G. (ed.).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

539 Downloads (Pure)

Investigation of Structural Behavior due to Bend-Twist Couplings in Wind Turbine Blades

Fedorov, V., Dimitrov, N. K., Berggreen, C., Krenk, S., Branner, K. & Berring, P., 2010, Proceedings. 9 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearch

File

Reliability Analysis of a Composite Blade Structure Using the Model Correction Factor Method

Dimitrov, N. K., Friis-Hansen, P. & Berggreen, C., 2010, 14th European Conference on Composites Materials. p. 760-ECCM14

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Structural Behaviour Due to Bend-Twist Couplings in Wind Turbine Blades

Fedorov, V., Dimitrov, N. K., Berggreen, C., Krenk, S., Branner, K. & Berring, P., 2010, Proceedings.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Upscaling of Sandwich Panels for 120 m Wind Turbine Blades

Andrlová, Z., Branner, K., Jensen, F. M. & Berggreen, C., 2010, Proceedings. California Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Use of the Model Correction Factor Method with FEM-based Reliability Analysis of Composites

Dimitrov, N. K., Friis-Hansen, P. & Berggreen, C., 2010, Proceedings — NAFEMS Nordic Seminar: Simulating Composite Materials and Structures.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2009

Assessment of foam fracture in sandwich beams using thermoelastic stress analysis

Dulieu-Barton, J. M., Berggreen, C. & Mettemberg, C., 2009, ICCM-17.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Design and analysis of DLS steel/composite thick-adherend adhesive joints

Hashim, S., Berggreen, C., Tsouvalis, N., McGeorge, D., Chirica, I., Moore, P., Boyd, S., Nisar, J., Anyfantis, K. N., Misirlis, K. & Juin, E., 2009, ICCM-17.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Effects of debonds and face sheet damage in GRP sandwich panels in naval ships

Hayman, B., Berggreen, C., Quispitupa, A., Moslemian, R. & Echtermeyer, A. T., 2009, 1st International Conferences on Light Weight Marine Structures.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Fabrication, testing and analysis of steel/composite DLS adhesive joints

Nashim, S., Nisar, J., Tsouvalis, N., Anyfantis, K. N., Moore, P., Chirca, I., Berggreen, C., Orsolini, A., Quispitupa, A., McGeorge, D., Hayman, B., Boyd, S., Misirlis, K., Downes, J., Dow, R. & Juin, E., 2009, Analysis and Design of Marine Structures. p. 379-385 (MARSTRUCT).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Improved damage tolerant face/core interface design in sandwich structures

Lundsgaard-Larsen, C., Berggreen, C., Quispitupa, A. & Carlsson, L. A., 2009, ICCM-17.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Investigation of structural behaviour due to bend-twist couplings in wind turbine blades

Fedorov, V., Dimitrov, N. K., Berggreen, C., Krenk, S., Branner, K. & Berring, P., 2009, ICCM-17.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Investigations on the ultimate compressive strength of composite plates with geometrical imperfections

Misirlis, K., Downes, J., Dow, R. S., Delarche, A., Lundsgaard-Larsen, C., Berggreen, C., Hayman, D., Tsouvalis, N., Yang, N. & Das, P. K., 2009, ICCM-17.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Mixed mode fracture toughness characterization of sandwich interfaces using the modified TSD specimen

Berggreen, C., Andreasen, J. H., Carlsson, L. A. & Thomsen, O. T., 2009, ICCM-17.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Studies of the buckling of composite plates in compression

Hayman, B., Berggreen, C., Lundsgaard-Larsen, C., Delarche, A., Toftegaard, H. L., Dow, R. S., Downes, J., Misirlis, K., Tsouvalis, N. & Douka, C., 2009, MARSTRUCT.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

The Application of the Model Correction Factor Method to a Reliability Analysis of a Composite Blade Structure

Dimitrov, N. K., Friis-Hansen, P. & Berggreen, C., 2009, ICCM-17.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2008

A Debonded Sandwich Specimen Under Mixed Mode Bending (MMB)

Quispitupa, A., Berggreen, C. & Carlsson, L. A., 2008, Proceedings of the 8th INTERNATIONAL CONFERENCE ON SANDWICH STRUCTURES. Porto, Portugal: Publindústria, Produção de Comunicação, Lda., p. 186-198 1231 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Advanced Mechanical Testing of Sandwich Materials

Hayman, B., Berggreen, C., Jenstrup, C. & Karlsen, K., 2008, Proceedings of the 8th INTERNATIONAL CONFERENCE ON SANDWICH STRUCTURES. Porto, Portugal: Publindústria, Produção de Comunicação, Lda., p. 417-427 1231 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Buckling and Fracture Investigation of Debonded Sandwich Columns: An Experimental and Numerical Study

Berggreen, C., Carlsson, L. A., Avilés, F., May, A. & Moslemian, R., 2008, Proceedings of the 8th INTERNATIONAL CONFERENCE ON SANDWICH STRUCTURES. Porto, Portugal: Publindústria, Produção de Comunicação, Lda., p. 287-297 1231 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Design of the Face/Core Interface for Improved Fracture Resistance

Lundsgaard-Larsen, C., Berggreen, C. & Carlsson, L. A., 2008, Proceedings of the 8th INTERNATIONAL CONFERENCE ON SANDWICH STRUCTURES. Porto, Portugal: Publindústria, Produção de Comunicação, Lda., p. 671-682 1231 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Fatigue Debond Growth in Sandwich Structures Loaded in Mixed Mode Bending (MMB)

Quispitupa, A., Berggreen, C. & Carlsson, L. A., 2008, Proceedings of the 13. European Conference on Composite Materials: Composites for Sustainable Progress. British Welding Research Association

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Fracture Mechanics Analysis of a Modified TSD Specimen

Berggreen, C. & Carlsson, L. A., 2008, Proceedings of the 8th INTERNATIONAL CONFERENCE ON SANDWICH STRUCTURES. Porto, Portugal: Publindústria, Produção de Comunicação, Lda., p. 173-185 1231 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Hydro-Elastic Tailoring and Optimization of a Composite Marine Propeller

Blasques, J. P. A. A., Berggreen, C. & Andersen, P., 2008, Proceedings of the 13. European Conference on Composite Materials: Composites for Sustainable Progress. British Welding Research Association

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Numerical and Experimental Investigation of Buckling and Post-Buckling Behavior of Curved Sandwich Panels

Moslemian, R., Berggreen, C. & Garm, J. H., 2008, Proceedings of the 8th INTERNATIONAL CONFERENCE ON SANDWICH STRUCTURES. Porto, Portugal: Publindústria, Produção de Comunicação, Lda., 1231 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

On the Effect of Curvature in Debonded Sandwich Panels Subjected to Compressive Loading

Moslemian, R., Berggreen, C. & Branner, K., 2008, Sandwich Construction 8: ICSS 8 : Proceedings of the 8th International Conference on Sandwich Structures. Porto, Portugal: Faculty of Engineering, University of Porto, p. 1121-1132 1231 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

On the use of a woven mat to control the crack path in composite sandwich specimens with foam core

Lundsgaard-Larsen, C., Berggreen, C. & Carlsson, L. A., 2008, Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2007. American Society of Mechanical Engineers, Vol. 10, Pts A and B. p. 975-976

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2007

A J Integral Approach for Measuring Cohesive Laws Using a Modified DCB Sandwich Specimen

Lundsgaard-Larsen, C., Berggreen, C. & Sørensen, B. F., 2007, Experimental Analysis of Nano and Engineering Materials and Structures: Proceedings of the 13th International Conference on Experimental Mechanics. Gdoutos, E. E. (ed.). Dordrecht, The Netherlands: Springer, 978 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Buckling strength of square composite plates with geometrical imperfections: Preliminary results

Berggreen, C., Jensen, C. & Hayman, B., 2007, Advancements in Marine Structures. Guedes Soares, C. & Das, P. K. (eds.). London, UK: Taylor and Francis Group, p. 413-420 578 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Design of X-joints in Sandwich Structures for Naval Vessels

Hayman, B., Berggreen, C., Lundsgaard-Larsen, C., Jenstrup, C. & Karlsen, K., 2007, 10th International Symposium of Practical Design of Ships and Other Floating Structures. Basu, R. I., Belenky, V., Wang, G. G. & Yu, Q. (eds.). Harleysville, Pensylvania, USA: Alcom Printing Group, Vol. Volume 2. p. 1086-1095 1366 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Improving Performance of Polymer Fiber Reinforced Sandwich X-Joints in Naval Vessels: Part II: Damage Tolerance

Lundsgaard-Larsen, C., Berggreen, C., Karlsen, K., Jenstrup, C. & Hayman, B., 2007, Sixteenth International Conference on Composite Materials: A Giant Step towards Environmental Awareness: From Green Composites to Aerospace. Kageyama, K., Ishikawa, T., Takeda, N., Hojo, M., Sugimoto, S. & Ogasawara, T. (eds.). Tokyo, Japan: Japan Society for Composite Materials, Vol. 2. 1432 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Improving Performance of Polymer Fiber Reinforced Sandwich X-Joints in Naval Vessels: Part I: Design Aspects

Berggreen, C., Lundsgaard-Larsen, C., Karlsen, K., Jenstrup, C. & Hayman, B., 2007, Sixteenth International Conference on Composite Materials: A Giant Step towards Environmental Awareness: From Green Composites to Aerospace. Kageyama, K., Ishikawa, T., Takeda, N., Hojo, M., Sugimoto, S. & Ogasawara, T. (eds.). Tokyo, Japan: Japan Society for Composite Materials, Vol. 2. 1432 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review