Fingerprint
- 1 Similar Profiles
Collaborations and top research areas from the last five years
-
Oxygen Saturation as a Strategy to Mitigate User-Induced Variation in Tomographic Volumetric Additive Manufacturing
Kruse, C. S., Pellizzon, N., Salajeghe, R., Spangenberg, J., Lucklum, F. & Islam, A., 2026, (Accepted/In press) Solid Freeform Fabrication 2025: Proceedings of the 36th Annual International Solid Freeform Fabrication Symposium: An Additive Manufacturing Conference. The University of Texas at Austin, p. 1214-1227Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review
-
Investigating thermal strains and chemical shrinkage in tomographic volumetric additive manufacturing
Pellizzon, N., Šeta, B., Kruse, C. S., Salajeghe, R. & Spangenberg, J., 2025, In: Additive Manufacturing. 105, 12 p., 104781.Research output: Contribution to journal › Journal article › Research › peer-review
Open AccessFile12 Downloads (Orbit) -
Numerical Modeling of Part Formation in Volumetric Additive Manufacturing
Salajeghe, R., Meile, D. H., Kruse, C. S., Marla, D. & Spangenberg, J., 2024, Industrializing Additive Manufacturing. AMPA 2023. . Klahn, C., Meboldt, M. & Ferchow, J. (eds.). Cham: Springer, p. 189-197 (Springer Tracts in Additive Manufacturing).Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review
-
Numerical modeling of tomographic volumetric additive manufacturing based on energy threshold method
Salajeghe, R., Šeta, B., Pellizzon, N., Kruse, C. G. S., Marla, D., Islam, A. & Spangenberg, J., 2024, In: Additive Manufacturing. 96, 12 p., 104552.Research output: Contribution to journal › Journal article › Research › peer-review
Open AccessFile68 Downloads (Orbit) -
Fabrication of conductive structures in volumetric additive manufacturing through embedded 3-D printing for electronic applications
Wolstrup, A. F., Dagnæs-Hansen, J. T., Brandt, O. V., Meile, D. H., Kruse, C. S., Spangenberg, J. & Zsurzsan, T. G., 2023, In: Additive Manufacturing Letters. 7, 5 p., 100178.Research output: Contribution to journal › Journal article › Research › peer-review
Open AccessFile146 Downloads (Orbit)
Projects
- 1 Active
-
Holistic Development of Tomographic Volumetric Additive Manufacturing for Hearing Health Care
Kruse, C. G. S. (PhD Student), Islam, A. (Main Supervisor), Lucklum, F. (Supervisor) & Spangenberg, J. (Supervisor)
15/08/2023 → 20/11/2026
Project: PhD
Prizes
-
Winner of PhD poster session - Best communication of the PhD project
Kruse, C. G. S. (Recipient), 1 Oct 2024
Prize: Prizes, scholarships, distinctions
-
Lecturer of the Year 2025
Kruse, C. G. S. (Recipient), 2 May 2025
Prize: Prizes, scholarships, distinctions