• Produktionstorvet, 427, 323A

    2800 Kgs. Lyngby

    Denmark

20032020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Poster
2017

3D Printing of Bio-inspired surfaces

Méndez Ribó, M. & Islam, A., 2017. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
361 Downloads (Pure)
2015

Optical micro-metrology of structured surfaces micro-machined by jet-ECM

Quagliotti, D., Tosello, G., Islam, A., Hansen, H. N., Zeidler, H., Martin, A., Schubert, A., Brandao, C. & Riemer, O., 2015. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

File
169 Downloads (Pure)
2010

Effects of moulding and environmental conditions on the mechanical and surface properties of injection moulded santoprene rubber

Islam, A., Ruby, T. M. & Jessen, R. L., 2010.

Research output: Contribution to conferencePosterResearch

File
164 Downloads (Pure)
2008

Selective micro metallization of polymers for biomedical and medical application

Islam, M. A., Hansen, H. N. & Tang, P. T., 2008.

Research output: Contribution to conferencePosterResearch

Surface tension of polymer melts - experimental investigations of its effect on polymer-polymer adhesion

Jankova Atanasova, K., Islam, M. A., Hansen, H. N. & Tang, P. T., 2008.

Research output: Contribution to conferencePosterResearchpeer-review

2007

Factors influencing the polymer-polymer adhesion- strength during two shot moulding

Islam, M. A., Hansen, H. N. & Tang, P. T., 2007.

Research output: Contribution to conferencePosterResearch

Surface tension of polymer melts - experimental investigations of its effects on polymer-polymer adhesion.

Islam, M. A., Jankova Atanasova, K., Hansen, H. N. & Tang, P. T., 2007.

Research output: Contribution to conferencePosterResearch